Druckansicht der Internetadresse:

Print page

Prof. Dr.-Ing. Volker Altstädt

Prof. Dr. Volker Altstädt Prof. Dr.-Ing. Volker Altstädt
Prof. Dr. Volker Altstädt

Faculty of Engineering Science
Department of Polymer Engineering


Job History

Since 2000
Full Professor (W3), Chair of Polymer Materials,
University of Bayreuth, Bayreuth
Since 2009
CEO of Neue Materialien Bayreuth GmbH,
Bayreuth
Since 1998
Department head Polymer Engineering of TuTech Innovation GmbH, Hamburg
10/1995 – 09/2000
Full Professor for “Polymers in Mechanical Engineering” and Director of the Department for Polymers and Polymer Composites,
Technical University Hamburg-Harburg, Germany
04/1992 – 09/1995
Lecturer for “Composite Testing”,
University of Kaiserslautern, Institute of Composites
01/1992 – 09/1995
Group Leader, BASF AG, Polymer Research Division, Department for Polymer Physics, Ludwigshafen, Germany
05/1987 – 12/1991
Research Scientist, BASF AG, Polymer Research Division, Department for Polymer Composites, Ludwigshafen, Germany
01/1984 – 04/1985
Research Scientist, Daimler Benz AG, Department for Materials Engineering, Stuttgart, Germany
03/1982 – 04/1987
Research Scientist, University of Kassel, Department of Mechanical Engineering, Kassel, Germany

Education

04/1987
M.S. - University of Kassel, Department of Experimental Physics,
Kassel, Germany - (Dipl. Phys.)
12/1981
PPh.D. - University of Kassel, Department of Mechanical Engineering, Kassel, Germany - (Dr.-Ing.)

Awards and other responsibilities

Since 2013
Managing Board “University of Bayreuth Graduate School”
Since 2013
Adjunct Professor at XI’AN Jiaotong University, China
Since 2012
Elected Member of acatech (NATIONAL ACADEMY OF SCIENCE AND ENGINEERING)
Since 2009
Member of the direction panel of the DFG-SFB 840
Since 2008
Advisory Board "Journal of Cellular Plastics"
Since 2006
Advisory Board “Cluster New Materials” within the “Alliance Bavaria Innovative”
Since 2006
Advisory Board "EPP-Forum e. V. Bayreuth"
Since 2005
Advisory Board Journal “Polymers & Polymer Composites”
Since 2005
International Representative of PPS (Polymer Processing Society)
Since 2005
Member of the Jury of the “Quadrant Award”
Since 2004
Member of WAK (SCIENTIFIC ALLIANCE OF POLYMER TECHNOLOGY)
Since 2004
Member of “Bayreuther Institut für Makromolekülforschung” (BIMF)
Since 2002
Member of the Jury of the “Rehau Award Technology”
Since 1988
Member of the IUPAC Subcommittee on “Structure and Properties of Commercial Polymers”
Prof. Dr. Volker Altstädt

Faculty of Engineering Science
Department of Polymer Engineering


  • Cellular Polymers
  • Polymer composites and nanocomposites
  • Polymer blends and compatibilization
  • Fatigue behavior of polymers
Prof. Dr. Volker Altstädt

Faculty of Engineering Science
Department of Polymer Engineering


Selected publications

2023

Du, Ngoc Uy Lan; Bethke, Christian; Gong, Shuaiping; Altstädt, Volker; Ruckdäschel, Holger
Foaming epoxy-amine-carbamate : The effect of different neat amines on rheological and cellular ...
in Journal of Cellular Plastics volume 59 (2023) issue 3. - page 231-247
doi:10.15495/EPub_UBT_00007651 ...

Hübsch, Jan David; Demleitner, Martin; Bard, Simon; Berendes, Philipp; Altstädt, Volker; Mittelstedt, Christian
Influence of Skydrol immersion at elevated temperatures on the thermo-mechanical properties of ...
in Journal of Applied Polymer Science volume 140 (2023) issue 1
doi:10.15495/EPub_UBT_00007097 ...

Weingart, Nick; Raps, Daniel; Lamka, Marc; Demleitner, Martin; Altstädt, Volker; Ruckdäschel, Holger
Influence of thermo-oxidative aging on the mechanical properties of the bead foams made of poly ...
in Journal of Polymer Science volume 61 (2023) issue 21. - page 2742-2757
doi:10.15495/EPub_UBT_00007295 ...

Bard, Simon; Tran, Thomas; Schönl, Florian; Rosenfeldt, Sabine; Demleitner, Martin; Ruckdäschel, Holger; Retsch, Markus; Altstädt, Volker
Relationship between the tensile modulus and the thermal conductivity perpendicular and in fibe ...
in Carbon Letters (2023)
doi:10.1007/s42823-023-00568-2 ...

2022

Menzel, Teresa; Meides, Nora; Mauel, Anika; Mansfeld, Ulrich; Kretschmer, Winfried; Kuhn, Meike; Herzig, Eva M.; Altstädt, Volker; Strohriegl, Peter; Senker, Jürgen; Ruckdäschel, Holger
Degradation of low-density polyethylene to nanoplastic particles by accelerated weathering
in Science of the Total Environment volume 826 (2022)
doi:10.1016/j.scitotenv.2022.154035 ...

Heinz, Michael; Callsen, Christoph; Stöcklein, Waldemar; Altstädt, Volker; Ruckdäschel, Holger
Halogen-free flame-retardant cable compounds : Influence of magnesium-di-hydroxide filler and c ...
in Polymer Engineering & Science volume 62 (2022) issue 2. - page 461-471
doi:10.15495/EPub_UBT_00006112 ...

Demleitner, Martin; Schönl, Florian; Angermann, Jörg; Fässler, Pascal; Lamparth, Iris; Rist, Kai; Schnur, Thomas; Catel, Yohann; Rosenfeldt, Sabine; Retsch, Markus; Ruckdäschel, Holger; Altstädt, Volker
Influence of Block Copolymer Concentration and Resin Crosslink Density on the Properties of UV- ...
in Macromolecular Materials and Engineering volume 307 (2022) issue 10
doi:10.1002/mame.202200320 ...

Bubmann, Tobias; Shi, Simon; Brückner, Alexander; Menzel, Teresa; Ruckdäschel, Holger; Schlarb, Alois K.; Altstädt, Volker
Influence of Sample Wetting Method on ESC-Behavior of PMMA under Dynamic Fatigue Crack Propagat ...
in Materials volume 15 (2022) issue 12
doi:10.3390/ma15124114 ...

Meides, Nora; Mauel, Anika; Menzel, Teresa; Altstädt, Volker; Ruckdäschel, Holger; Senker, Jürgen; Strohriegl, Peter
Quantifying the fragmentation of polypropylene upon exposure to accelerated weathering
in Microplastics and Nanoplastics volume 2 (2022)
doi:10.1186/s43591-022-00042-2 ...

Standau, Tobias; Nofar, Mohammadreza; Dörr, Dominik; Ruckdäschel, Holger; Altstädt, Volker
A Review on Multifunctional Epoxy-Based Joncryl® ADR Chain Extended Thermoplastics
in Polymer Reviews volume 62 (2022) issue 2. - page 296-350
doi:10.1080/15583724.2021.1918710 ...

Nofar, Mohammadreza; Utz, Julia; Geis, Nico; Altstädt, Volker; Ruckdäschel, Holger
Foam 3D Printing of Thermoplastics : A Symbiosis of Additive Manufacturing and Foaming Technolo ...
in Advanced Science volume 9 (2022) issue 11
doi:10.15495/EPub_UBT_00006921 ...

Brütting, Christian; Dreier, Julia; Bonten, Christian; Altstädt, Volker; Ruckdäschel, Holger
Glass transition of PLA-CO₂ mixtures after solid-state saturation
in Journal of Cellular Plastics volume 58 (2022) issue 6. - page 917-931
doi:10.15495/EPub_UBT_00007060 ...

2021

Brütting, Christian; Dreier, J.; Bonten, C.; Altstädt, Volker; Ruckdäschel, Holger
Amorphous Polylactide Bead Foam : Effect of Talc and Chain Extension on Foaming Behavior and Co ...
in Journal of Renewable Materials volume 9 (2021) issue 11. - page 1859-1868
doi:10.32604/jrm.2021.016244 ...

Wongsamut, Chompunut; Demleitner, Martin; Suwanpreedee, Rachaneewan; Altstädt, Volker; Manuspiya, Hathaikarn
Copolymerization approach of soft segment towards the adhesion improvement of polycarbonate-bas ...
in The Journal of Adhesion volume 97 (2021) issue 15. - page 1456-1472
doi:10.1080/00218464.2020.1786370 ...

Rosnitschek, Tobias; Seefeldt, Andressa; Alber-Laukant, Bettina; Neumeyer, Thomas; Altstädt, Volker; Tremmel, Stephan
Correlations of Geometry and Infill Degree of Extrusion Additively Manufactured 316L Stainless ...
in Materials volume 14 (2021) issue 18
doi:10.3390/ma14185173 ...

Koedel, Justus; Seibt, Sebastian; Callsen, Christoph; Puchtler, Florian; Weise, Markus; Weidinger, Andy; Altstädt, Volker; Ruckdäschel, Holger; Schobert, Rainer; Biersack, Bernhard
DNA as a Natural Flame Retardant for Cellulose Acetate Polymer Mixtures
in ChemistrySelect volume 6 (2021) issue 15. - page 3605-3609
doi:10.1002/slct.202004493 ...

Mattar, Nour; Langlois, Valérie; Renard, Estelle; Rademacker, Tim; Hübner, Fabian; Demleitner, Martin; Altstädt, Volker; Ruckdäschel, Holger; Rios de Anda, Agustin
Fully Bio-Based Epoxy-Amine Thermosets Reinforced with Recycled Carbon Fibers as a Low Carbon-F ...
in ACS Applied Polymer Materials volume 3 (2021) issue 1. - page 426-435
doi:10.1021/acsapm.0c01187 ...

Menzel, Teresa; Weigert, Sebastian; Gagsteiger, Andreas; Eich, Yannik; Sittl, Sebastian; Papastavrou, Georg; Ruckdäschel, Holger; Altstädt, Volker; Höcker, Birte
Impact of Enzymatic Degradation on the Material Properties of Poly(Ethylene Terephthalate)
in Polymers volume 13 (2021) issue 22
doi:10.3390/polym13223885 ...

Azadi, Fatemeh; Jafari, Seyed Hassan; Khonakdar, Hossein Ali; Arjmand, Mohammad; Wagenknecht, Udo; Altstädt, Volker
Influence of Graphene Oxide on Thermally Induced Shape Memory Behavior of PLA/TPU Blends : Corr ...
in Macromolecular Materials and Engineering volume 306 (2021) issue 2
doi:10.1002/mame.202000576 ...

Kuhnigk, Justus; Raps, Daniel; Standau, Tobias; Luik, Marius; Altstädt, Volker; Ruckdäschel, Holger
Insights into the Bead Fusion Mechanism of Expanded Polybutylene Terephthalate (E-PBT)
in Polymers volume 13 (2021) issue 4
doi:10.3390/polym13040582 ...

Dreier, Julia; Brütting, Christian; Ruckdäschel, Holger; Altstädt, Volker; Bonten, Christian
Investigation of the Thermal and Hydrolytic Degradation of Polylactide during Autoclave Foaming
in Polymers volume 13 (2021) issue 16
doi:10.3390/polym13162624 ...

Kaysser, Simon T.; Bethke, Christian; Romero, Isabel Fernandez; Wei, Angeline Wo Weng; Keun, Christian A.; Ruckdäschel, Holger; Altstädt, Volker
Investigations on Epoxy-Carbamate Foams Modified with Different Flame Retardants for High-Perfo ...
in Polymers volume 13 (2021) issue 22
doi:10.15495/EPub_UBT_00006577 ...

Klose, Bastian; Kremer, Daniel; Aksit, Merve; van der Zwan, Kasper P.; Kreger, Klaus; Senker, Jürgen; Altstädt, Volker; Schmidt, Hans-Werner
Kinked Bisamides as Efficient Supramolecular Foam Cell Nucleating Agents for Low-Density Polyst ...
in Polymers volume 13 (2021) issue 7
doi:10.3390/polym13071094 ...

Hübner, Fabian; Brückner, Alexander; Dickhut, Tobias; Altstädt, Volker; Rios de Anda, Agustín; Ruckdäschel, Holger
Low temperature fatigue crack propagation in toughened epoxy resins aimed for filament winding ...
in Polymer Testing volume 102 (2021)
doi:10.1016/j.polymertesting.2021.107323 ...

Bakis, Gökhan; Wendel, Jan-Felix; Zeiler, Rico; Aksit, Alper; Häublein, Markus; Demleitner, Martin; Benra, Jan; Forero, Stefan; Schütz, Walter; Altstädt, Volker
Mechanical Properties of the Carbon Nanotube Modified Epoxy–Carbon Fiber Unidirectional Prepreg ...
in Polymers volume 13 (2021) issue 5
doi:10.3390/polym13050770 ...

Du Ngoc, Uy Lan; Bethke, Christian; Altstädt, Volker; Ruckdäschel, Holger
New Insights on Expandability of Pre-Cured Epoxy Using a Solid-State CO₂-Foaming Technique
in Polymers volume 13 (2021) issue 15
doi:10.3390/polym13152441 ...

Meides, Nora; Menzel, Teresa; Pötzschner, Björn; Löder, Martin G. J.; Mansfeld, Ulrich; Strohriegl, Peter; Altstädt, Volker; Senker, Jürgen
Reconstructing the Environmental Degradation of Polystyrene by Accelerated Weathering
in Environmental Science & Technology volume 55 (2021) issue 12. - page 7930-7938
doi:10.1021/acs.est.0c07718 ...

Bethke, Christian; Kaysser, Simon T.; Du Ngoc, Uy Lan; Goller, Sebastian M.; van der Zwan, Kasper P.; Senker, Jürgen; Ruckdäschel, Holger; Altstädt, Volker
Synthesis and Characterization of Dual-Functional Carbamates as Blowing and Curing Agents for E ...
in Industrial & Engineering Chemistry Research volume 60 (2021) issue 19. - page 7065-7080
doi:10.1021/acs.iecr.0c05262 ...

Bethke, Christian; Goller, Sebastian M.; Du Ngoc, Uy Lan; Kaysser, Simon Tino; Altstädt, Volker; Ruckdäschel, Holger
Tailoring Epoxy Resin Foams by Pre-Curing with Neat Amine Hardeners and Its Derived Carbamates
in Polymers volume 13 (2021) issue 8
doi:10.3390/polym13081348 ...

Shabani, Amin; Fathi, Amir; Erlwein, Sebastian; Altstädt, Volker
Thermoplastic polyurethane foams : From autoclave batch foaming to bead foam extrusion
in Journal of Cellular Plastics volume 57 (2021) issue 4. - page 391-411
doi:10.1177/0021955X20912201 ...

2020

Aksit, Merve; Altstädt, Volker
Hybrid Materials - Historical Perspective and Current Trends
Bayreuth, 2020. - 23 page

Kiani, Fatemeh; Entezam, Mehdi; Khonakdar, Hossein Ali; Jafari, Seyed Hassan; Callsen, Christoph; Altstädt, Volker
Assessment of compatibilization role of nanoclay in immiscible polystyrene/ethylene–octene copo ...
in Journal of Applied Polymer Science volume 137 (2020) issue 22
doi:10.1002/app.48748 ...

Weingart, Nick; Raps, Daniel; Lu, Mingfu; Endner, Lukas; Altstädt, Volker
Comparison of the Foamability of Linear and Long-Chain Branched Polypropylene : The Legend of S ...
in Polymers volume 12 (2020) issue 3
doi:10.3390/polym12030725 ...

Shahnooshi, Mahboobeh; Javadi, Azizeh; Nazockdast, Hossein; Altstädt, Volker
Development of in situ nanofibrillar poly (lactic acid)/poly (butylene terephthalate) composite ...
in European Polymer Journal volume 125 (2020)
doi:10.1016/j.eurpolymj.2020.109489 ...

Murillo Castellón, Svenja; Standau, Tobias; Altstädt, Volker; Bonten, Christian
Effect of the chemical modification on the thermal and rheological properties of different pol ...
Proceedings of the 35th International Conference of the Polymer Processing Society (PPS-35)
Melville, NY : AIP Publications, 2020 (AIP Conference Proceedings; 2205)
doi:10.1063/1.5142983 ...

Standau, Tobias; Long, Huan; Murillo Castellón, Svenja; Brütting, Christian; Bonten, Christian; Altstädt, Volker
Evaluation of the Zero Shear Viscosity, the D-Content and Processing Conditions as Foam Relevan ...
in Materials volume 13 (2020) issue 6
doi:10.3390/ma13061371 ...

Dörr, Dominik; Raps, Daniel; Kirupanantham, Dharan; Holmes, Chris; Altstädt, Volker
Expanded polyamide 12 bead foams (ePA) thermo-mechanical properties of molded parts
Proceedings of the 35th International Conference of the Polymer Processing Society (PPS-35)
Melville, NY : AIP Publications, 2020 (AIP Conference Proceedings; 2205)
doi:10.1063/1.5142952 ...

Weingart, Nick; Raps, Daniel; Kuhnigk, Justus; Klein, Andreas; Altstädt, Volker
Expanded Polycarbonate (EPC) : A New Generation of High-Temperature Engineering Bead Foams
in Polymers volume 12 (2020) issue 10
doi:10.3390/polym12102314 ...

Lengsfeld, Hauke; Lacalle, Javier; Neumeyer, Thomas; Altstädt, Volker
Faserverbundwerkstoffe : Prepregs und ihre Verarbeitung. 2., aktualisierte und erweiterte Aufla ...
München : Hanser, 2020. - XIX, 266 page
doi:10.3139/9783446466036 ...

Bethke, Christian; Weber, Lais; Goedderz, Daniela; Standau, Tobias; Döring, Manfred; Altstädt, Volker
Fire behavior of flame retarded sandwich structures containing PET foam cores and epoxy face sh ...
in Polymer Composites volume 41 (2020) issue 12. - page 5195-5208
doi:10.1002/pc.25786 ...

Goedderz, Daniela; Weber, Lais; Markert, Daniel; Schießer, Alexander; Fasel, Claudia; Riedel, Ralf; Altstädt, Volker; Bethke, Christian; Fuhr, Olaf; Puchtler, Florian; Breu, Josef; Döring, Manfred
Flame retardant polyester by combination of organophosphorus compounds and an NOR radical formi ...
in Journal of Applied Polymer Science volume 137 (2020) issue 1
doi:10.1002/app.47876 ...

Reuter, Jens; Standau, Tobias; Altstädt, Volker; Döring, Manfred
Flame-retardant hybrid materials based on expandable polystyrene beads
in Journal of Fire Sciences volume 38 (2020) issue 3. - page 270-283
doi:10.1177/0734904119899851 ...

Bethke, Christian; Goedderz, Daniela; Weber, Lais; Standau, Tobias; Döring, Manfred; Altstädt, Volker
Improving the flame-retardant property of bottle-grade PET foam made by reactive foam extrusion
in Journal of Applied Polymer Science volume 137 (2020) issue 35
doi:10.1002/app.49042 ...

Keilholz, Clemens; Raps, Daniel; Köppl, Thomas; Altstädt, Volker
Influence of nucleating agent type on the morphology of extruded polyetherimide foam for printe ...
in Journal of Cellular Plastics volume 56 (2020) issue 3. - page 317-341
doi:10.1177/0021955X19864107 ...

Hutschreuther, Julia; Kunz, Raphael; Breu, Josef; Altstädt, Volker
Influence of Particle Size on Toughening Mechanisms of Layered Silicates in CFRP
in Materials volume 13 (2020) issue 10
doi:10.3390/ma13102396 ...

Hofmann, Karoline; Brütting, Christian; Gehde, Michael; Altstädt, Volker
Interaction Between Foam Injection Molding and Welding Process
Advances in Polymer Processing 2020
Berlin : Springer Vieweg, 2020. - page 233-246
doi:10.1007/978-3-662-60809-8_19 ...

Geschwindner, Christopher; Goedderz, Daniela; Li, Tao; Köser, Jan; Fasel, Claudia; Riedel, Ralf; Altstädt, Volker; Bethke, Christian; Puchtler, Florian; Breu, Josef; Döring, Manfred; Dreizler, Andreas; Böhm, Benjamin
Investigation of flame retarded polypropylene by high-speed planar laser-induced fluorescence o ...
in Experiments in Fluids volume 61 (2020)
doi:10.1007/s00348-019-2864-5 ...

Habel, Christoph; Tsurko, Evgeny; Timmins, Renee; Hutschreuther, Julia; Kunz, Raphael; Schuchardt, Dominik; Rosenfeldt, Sabine; Altstädt, Volker; Breu, Josef
Lightweight Ultra-High Barrier Liners for Helium and Hydrogen
in ACS Nano volume 14 (2020) issue 6. - page 7018-7024
doi:10.1021/acsnano.0c01633 ...

Aksit, Merve; Gröschel, Sebastian; Kuhn, Ute; Aksit, Alper; Kreger, Klaus; Schmidt, Hans-Werner; Altstädt, Volker
Low-Density Polybutylene Terephthalate Foams with Enhanced Compressive Strength via a Reactive- ...
in Polymers volume 12 (2020) issue 9
doi:10.3390/polym12092021 ...

Mörl, Stefan; Knorr, Daniel; Streinz, Maximilian; Mörl, Michaela; Altstädt, Volker
Melt impregnation of woven glass fabric reinforced composites in situ modified with short glass ...
in Polymer Composites volume 41 (2020) issue 10. - page 4117-4129
doi:10.1002/pc.25698 ...

Göttermann, Svenja; Altstädt, Volker; Standau, Tobias; Bonten, Christian
Modified polylactide with improved thermal and rheological properties for foaming
ANTEC 2017 : Proceedings of the Technical Conference & Exhibition, Anaheim, California, USA May 8-10, 2017
Newtown, Conn. : Society of Plastics Engineers, 2020. - page 452-456

Standau, Tobias; Schreiers, Peter; Hilgert, Kathrin; Altstädt, Volker
Properties of bead foams with increased heat stability made from the engineering polymer polybu ...
Proceedings of the 35th International Conference of the Polymer Processing Society (PPS-35)
Melville, NY : AIP Publications, 2020 (AIP Conference Proceedings; 2205)
doi:10.1063/1.5142954 ...

Aksit, Alper; Geis, Nico; Aksit, Merve; Altstädt, Volker
Properties of Styrene-Maleic Anhydride Copolymer Compatibilized Polyamide 66/Poly (Phenylene Et ...
in Materials volume 13 (2020) issue 15
doi:10.3390/ma13153400 ...

Aksit, Alper; Menzel, Teresa; Aksit, Merve; Altstädt, Volker
Properties of Styrene-Maleic Anhydride Copolymer Compatibilized Polyamide 66/Poly (Phenylene Et ...
in Materials volume 13 (2020) issue 5
doi:10.3390/ma13051237 ...

Dörr, Dominik; Kuhn, Ute; Altstädt, Volker
Rheological Study of Gelation and Crosslinking in Chemical Modified Polyamide 12 Using a Multiw ...
in Polymers volume 12 (2020) issue 4
doi:10.3390/polym12040855 ...

Bucknall, Clive; Altstädt, Volker; Auhl, Dietmar; Buckley, Paul; Dijkstra, Dirk; Galeski, Andrzej; Gögelein, Christoph; Handge, Ulrich A.; He, Jiasong; Liu, Chen-Yang; Michler, Goerg; Piorkowska, Ewa; Slouf, Miroslav; Vittorias, Iakovos; Wu, Jun Jie
Structure, processing and performance of ultra-high molecular weight polyethylene (IUPAC Techni ...
in Pure and Applied Chemistry volume 92 (2020) issue 9. - page 1469-1483
doi:10.1515/pac-2019-0405 ...

Bucknall, Clive; Altstädt, Volker; Auhl, Dietmar; Buckley, Paul; Dijkstra, Dirk; Galeski, Andrzej; Gögelein, Christoph; Handge, Ulrich A.; He, Jiasong; Liu, Chen-Yang; Michler, Goerg; Piorkowska, Ewa; Slouf, Miroslav; Vittorias, Iakovos; Wu, Jun Jie
Structure, processing and performance of ultra-high molecular weight polyethylene (IUPAC Techni ...
in Pure and Applied Chemistry volume 92 (2020) issue 9. - page 1485-1501
doi:10.1515/pac-2019-0403 ...

Bucknall, Clive; Altstädt, Volker; Auhl, Dietmar; Buckley, Paul; Dijkstra, Dirk; Galeski, Andrzej; Gögelein, Christoph; Handge, Ulrich A.; He, Jiasong; Liu, Chen-Yang; Michler, Goerg; Piorkowska, Ewa; Slouf, Miroslav; Vittorias, Iakovos; Wu, Jun Jie
Structure, processing and performance of ultra-high molecular weight polyethylene (IUPAC Techni ...
in Pure and Applied Chemistry volume 92 (2020) issue 9. - page 1503-1519
doi:10.1515/pac-2019-0406 ...

Bucknall, Clive; Altstädt, Volker; Auhl, Dietmar; Buckley, Paul; Dijkstra, Dirk; Galeski, Andrzej; Gögelein, Christoph; Handge, Ulrich A.; He, Jiasong; Liu, Chen-Yang; Michler, Goerg; Piorkowska, Ewa; Slouf, Miroslav; Vittorias, Iakovos; Wu, Jun Jie
Structure, processing and performance of ultra-high molecular weight polyethylene (IUPAC Techni ...
in Pure and Applied Chemistry volume 92 (2020) issue 9. - page 1521-1536
doi:10.1515/pac-2019-0408 ...

Hübner, Fabian; Szpoganicz, Eduardo; Demleitner, Martin; Kuhnigk, Justus; Altstädt, Volker; Rios de Anda, Agustín
Time Domain ¹H NMR, Thermomechanical, and Rheology Multiscale Structural Characterization of Po ...
in ACS Applied Polymer Materials volume 2 (2020) issue 11. - page 4779-4789
doi:10.1021/acsapm.0c00763 ...

Du Ngoc, Uy Lan; Fauzi, Muhammad Syazwan; Viet, Cao Xuan; Raps, Daniel; Altstädt, Volker
Viscoelastic epoxy foams by an aqueous emulsion foaming process
in Journal of Cellular Plastics volume 56 (2020) issue 1. - page 105-118
doi:10.1177/0021955X19864016 ...

Koedel, Justus; Callsen, Christoph; Weise, Markus; Puchtler, Florian; Weidinger, Andy; Altstädt, Volker; Schobert, Rainer; Biersack, Bernhard
Investigation of melamine and DOPO-derived flame retardants for the bioplastic cellulose acetat ...
in Polymer Testing volume 90 (2020)
doi:10.1016/j.polymertesting.2020.106702 ...

Dörr, Dominik; Standau, Tobias; Murillo Castellón, Svenja; Bonten, Christian; Altstädt, Volker
Rheology in the Presence of Carbon Dioxide (CO₂) to Study the Melt Behavior of Chemically Modif ...
in Polymers volume 12 (2020) issue 5
doi:10.3390/polym12051108 ...

2019

Lengsfeld, Hauke; Mainka, Hendrik; Altstädt, Volker
Carbonfasern : Herstellung, Anwendung, Verarbeitung
München : Hanser, 2019. - XVIII, 215 page
doi:10.3139/9783446460805 ...

Standau, Tobias; Zhao, Chunjing; Murillo Castellón, Svenja; Bonten, Christian; Altstädt, Volker
Chemical Modification and Foam Processing of Polylactide (PLA)
in Polymers volume 11 (2019) issue 2
doi:10.15495/EPub_UBT_00004643 ...

Bard, Simon; Schönl, Florian; Demleitner, Martin; Altstädt, Volker
Copper and Nickel Coating of Carbon Fiber for Thermally and Electrically Conductive Fiber Reinf ...
in Polymers volume 11 (2019) issue 5
doi:10.15495/EPub_UBT_00004667 ...

Standau, Tobias; Hädelt, Bianca; Fafara, Michael; Altstädt, Volker
Development of a bead foam based on the engineering polymer polybutylene terephthalate
PROCEEDINGS OF THE EUROPE/AFRICA CONFERENCE DRESDEN 2017 : POLYMER PROCESSING SOCIETY PPS
Melville, NY : AIP Publishing, 2019. - page 060004 . - (AIP Conference Proceedings; 2055)
doi:10.1063/1.5084836 ...

Demleitner, Martin; Sanchez‐Vazquez, Sandra A.; Raps, Daniel; Bakis, Gökhan; Pflock, Tobias; Chaloupka, Alexander; Schmölzer, Stefan; Altstädt, Volker
Dielectric analysis monitoring of thermoset curing with ionic liquids : From modeling to the pr ...
in Polymer Composites volume 40 (2019) issue 12. - page 4500-4509
doi:10.1002/pc.25306 ...

Bard, Simon; Demleitner, Martin; Weber, Regino; Zeiler, Rico; Altstädt, Volker
Effect of Curing Agent on the Compressive Behavior at Elevated Test Temperature of Carbon Fiber ...
in Polymers volume 11 (2019) issue 6
doi:10.15495/EPub_UBT_00004670 ...

Kothmann, Martin H.; Rios de Anda, Agustin; Köppel, Andreas; Zeiler, Rico; Tauer, Georg; Zhang, Zhong; Altstädt, Volker
The Effect of Dispersion and Particle–Matrix Interactions on the Fatigue Behavior of Novel Epo ...
Processing of polymer nanocomposites
München : Hanser, 2019. - page 121-155
doi:10.3139/9781569906361.004 ...

Pawelski, Christin; Kang, Enpu; Bakis, Gökhan; Altstädt, Volker
Effect of filler type and particle size distribution on thermal properties of bimodal and hybri ...
PROCEEDINGS OF THE EUROPE/AFRICA CONFERENCE DRESDEN 2017 : POLYMER PROCESSING SOCIETY PPS
Melville, NY : AIP Publishing, 2019. - page 050007 . - (AIP Conference Proceedings; 2055)
doi:10.1063/1.5084826 ...

Bethke, Christian; Sanchez-Vazquez, Sandra A.; Raps, Daniel; Bakis, Gökhan; Bard, Simon; Du Ngoc, Uy Lan; Altstädt, Volker
Effect of Resin and Blocked/Unblocked Hardener Mixture on the Production of Epoxy Foams with CO ...
in Polymers volume 11 (2019) issue 5
doi:10.3390/polym11050793 ...

Standau, Tobias; Murillo Castellón, Svenja; Delavoie, Agathe; Bonten, Christian; Altstädt, Volker
Effects of chemical modifications on the rheological and the expansion behavior of polylactide ...
in e-Polymers volume 19 (2019) issue 1. - page 297-304
doi:10.1515/epoly-2019-0030 ...

Häublein, Markus; Peter, Karin; Brückner, Alexander; Altstädt, Volker
Evaluation of DOPO and Nano-Silica Modified Epoxy Resin Systems as Low Viscous, Flame Retardant ...
in Key Engineering Materials volume 809 (2019) . - page 3-8
doi:10.4028/www.scientific.net/KEM.809.3 ...

Aksit, Merve; Zhao, Chunjing; Klose, Bastian; Kreger, Klaus; Schmidt, Hans-Werner; Altstädt, Volker
Extruded Polystyrene Foams with Enhanced Insulation and Mechanical Properties by a Benzene-Tris ...
in Polymers volume 11 (2019) issue 2
doi:10.3390/polym11020268 ...

Standau, Tobias; Altstädt, Volker
Foams
Polypropylene handbook : morphology, blends and composites
Cham : Springer, 2019. - page 579-641
doi:10.1007/978-3-030-12903-3_10 ...

Utaloff, Katja; Kothmann, Martin Heinz; Ciesielski, Michael; Döring, Manfred; Neumeyer, Thomas; Altstädt, Volker; Gorman, Irene; Henningsen, Michael
Improvement of fracture toughness and glass transition temperature of DGEBA‐based epoxy systems ...
in Polymer Engineering & Science volume 59 (2019) issue 1. - page 86-95
doi:10.1002/pen.24870 ...

Bard, Simon; Schönl, Florian; Demleitner, Martin; Altstädt, Volker
Influence of Fiber Volume Content on Thermal Conductivity in Transverse and Fiber Direction of ...
in Materials volume 12 (2019) issue 7
doi:10.15495/EPub_UBT_00004653 ...

Krause, Katharina; Neumeyer, Thomas; Baumgart, Christin; Altstädt, Volker
Influence of low heat conductive inserts on morphology of foam injection molded parts
PROCEEDINGS OF THE EUROPE/AFRICA CONFERENCE DRESDEN 2017 : POLYMER PROCESSING SOCIETY PPS
Melville, NY : AIP Publishing, 2019. - page 030047 . - (AIP Conference Proceedings; 2055)
doi:10.1063/1.5088305 ...

Keller, Jan-Hendrik; Altstädt, Volker
Influence of mid-stress on the dynamic fatigue of a light weight EPS bead foam
in e-Polymers volume 19 (2019) issue 1. - page 349-354
doi:10.1515/epoly-2019-0036 ...

Grünewald, Jonas; Parlevliet, Patricia P.; Matschinski, Alexander; Altstädt, Volker
Mechanical performance of CF/PEEK–PEI foam core sandwich structures
in Journal of Sandwich Structures and Materials volume 21 (2019) issue 8. - page 2680-2699
doi:10.1177/1099636217715704 ...

Grünewald, Jonas; Orth, Tilman; Parlevliet, Patricia; Altstädt, Volker
Modified foam cores for full thermoplastic composite sandwich structures
in Journal of Sandwich Structures and Materials volume 21 (2019) issue 3. - page 1150-1166
doi:10.1177/1099636217708741 ...

Göttermann, Svenja; Standau, Tobias; Altstädt, Volker; Bonten, Christian
Modified polylactide with improved properties for extrusion foaming
PROCEEDINGS OF THE EUROPE/AFRICA CONFERENCE DRESDEN 2017 : POLYMER PROCESSING SOCIETY PPS
Melville, NY : AIP Publishing, 2019. - page 020003 . - (AIP Conference Proceedings; 2055)
doi:10.1063/1.5084804 ...

Aksit, Merve; Klose, Bastian; Zhao, C.; Kreger, Klaus; Schmidt, Hans-Werner; Altstädt, Volker
Morphology control of extruded polystyrene foams with benzene-trisamide-based nucleating agents
in Journal of Cellular Plastics volume 55 (2019) issue 3. - page 249-261
doi:10.1177/0021955X19837508 ...

Esmaeili, Mohsen; Pircheraghi, Gholamreza; Bagheri, Amir Reza; Altstädt, Volker
Poly(lactic acid)/coplasticized thermoplastic starch blend : Effect of plasticizer migration on ...
in Polymers for Advanced Technologies volume 30 (2019) issue 4. - page 839-851
doi:10.1002/pat.4517 ...

Habla, Franz; Kropka, Michael; Mühlbacher, Mathias; Neumeyer, Thomas; Altstädt, Volker
Tailor Made Hybrid Laminates Based on UD-Tapes : A Way to Efficient Thermoplastic Components
in Key Engineering Materials volume 809 (2019) . - page 41-46
doi:10.4028/www.scientific.net/KEM.809.41 ...

Kunz, Raphael; Martin, Thomas; Callsen, Christoph; Hutschreuther, Julia; Altstädt, Volker; Breu, Josef
Thermal expansion of clay polymer nanocomposites as a function of aspect ratio and filler conte ...
in Polymer volume 169 (2019) . - page 74-79
doi:10.1016/j.polymer.2019.02.036 ...

Pawelski-Höll, Christin; Bhagwat, Sagar; Altstädt, Volker
Thermal, fire, and mechanical properties of solvent-free processed BN/boehmite-filled prepregs
in Polymer Engineering & Science volume 59 (2019) issue 9. - page 1840-1852
doi:10.15495/EPub_UBT_00005010 ...

Bubmann, Tobias; Seidel, Andreas; Altstädt, Volker
Transparent PC/PMMA Blends Via Reactive Compatibilization in a Twin-Screw Extruder
in Polymers volume 11 (2019) issue 12
doi:10.3390/polym11122070 ...

Bard, Simon; Demleitner, Martin; Radtke, Marius; Altstädt, Volker
Transverse Thermal Conductivity of Epoxy Carbon Fiber Prepreg Laminates with a Graphite Filled ...
in Journal of Composites Science volume 3 (2019) issue 2
doi:10.3390/jcs3020044 ...

Häublein, Markus; Peter, Karin; Bakis, Gökhan; Mäkimieni, Roi; Altstädt, Volker; Möller, Martin
Investigation on the Flame Retardant Properties and Fracture Toughness of DOPO and Nano-SiO₂ Mo ...
in Materials volume 12 (2019) issue 9
doi:10.15495/EPub_UBT_00004668 ...

2018

Neumeyer, Thomas; Altstädt, Volker; Kropka, Michael; Knöchel, Johannes
Resistance of 3D printed polymer structures against fatigue crack growth
IRF2018 : proceedings of the 6th International Conference on Integrity-Reliability-Failure
Porto : FEUP-INEGI, 2018. - page 949-950
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&so ...

Gensel, Julia; Hager, L.; Helmlinger, Lars; Weinbrenner, M.; Zhu, Yejun; Neumeyer, Thomas; Strube, Franziska; Thäter, Stefan; Rosemann, Bernd; Altstädt, Volker
CO2 Capture / Utilization Materials
2018
Material Experience (MatX 2018), Nürnberg

Cestari, Sibele P.; Albitres, Gerson Alberto Valencia; Mendes, Luis C.; Altstädt, Volker; Gabriel, Jair Braga; Avila, Gabriel Carvalho Bertassone; dos Santos Silveira, Ivan de Sousa
Advanced properties of composites of recycled high-density polyethylene and microfibers of suga ...
in Journal of Composite Materials volume 52 (2018) issue 7. - page 867-876
doi:10.1177/0021998317716268 ...

Helmlinger, Lars; Zhu, Yejun; Gensel, Julia; Neumeyer, Thomas; Thäter, Stefan; Strube, Franziska; Bauer, Christoph; Rosemann, Bernd; Altstädt, Volker
Application of Amine-Functionalized Cellulose Foam for CO2 Capture and Storage in the Brewing I ...
in Journal of Renewable Materials volume 6 (2018) issue 3. - page 219-225
doi:10.7569/JRM.2017.634161 ...

Rosemann, Bernd; Binkert, Jörg; Altstädt, Volker; Maderer, Karl-Heinz
Capture and Storage of Carbon Dioxide (CaSCaDe)
Bamberg, 2018. - 57 page
https://www.dbu.de/OPAC/ab/DBU-Abschlussbericht-AZ ...

Grünewald, Jonas; Parlevliet, Patricia; Altstädt, Volker
Definition of process parameters for manufacturing of thermoplastic composite sandwiches : Part ...
in Journal of Thermoplastic Composite Materials volume 31 (2018) issue 6. - page 745-766
doi:10.1177/0892705717729013 ...

Grünewald, Jonas; Parlevliet, Patricia; Altstädt, Volker
Definition of process parameters for manufacturing of thermoplastic composite sandwiches : Part ...
in Journal of Thermoplastic Composite Materials volume 31 (2018) issue 6. - page 803-819
doi:10.1177/0892705717722189 ...

Standau, Tobias; Hädelt, Bianca; Schreier, Peter; Altstädt, Volker
Development of a Bead Foam from an Engineering Polymer with Addition of Chain Extender : Expand ...
in Industrial & Engineering Chemistry Research volume 57 (2018) issue 50. - page 17170-17176
doi:10.1021/acs.iecr.8b04799 ...

Bard, Simon; Demleitner, Martin; Häublein, Markus; Altstädt, Volker
Fracture behaviour of prepreg laminates studied by in-situ SEM mechanical tests
in Procedia Structural Integrity volume 13 (2018) . - page 1442-1446
doi:10.1016/j.prostr.2018.12.299 ...
22nd European Conference on Fracture : ECF22, Belgrad, Serbien

Esmaeili, Mohsen; Pircheraghi, Gholamreza; Bagheri, Amir Reza; Altstädt, Volker
The impact of morphology on thermal properties and aerobic biodegradation of physically compati ...
in Polymers for Advanced Technologies volume 29 (2018) issue 12. - page 2880-2889
doi:10.1002/pat.4407 ...

Mörl, Michaela; Steinlein, Christoph; Kreger, Klaus; Schmidt, Hans-Werner; Altstädt, Volker
Improved compression properties of polypropylene extrusion foams by supramolecular additives
in Journal of Cellular Plastics volume 54 (2018) issue 3. - page 483-498
doi:10.1177/0021955X17695096 ...

Bakis, Gökhan; Kothmann, Martin H.; Zeiler, Rico; Brückner, Alexander; Ziadeh, Mazen; Breu, Josef; Altstädt, Volker
Influence of size, aspect ratio and shear stiffness of nanoclays on the fatigue crack propagati ...
in Polymer volume 158 (2018) . - page 372-380
doi:10.1016/j.polymer.2018.10.008 ...

Goodarzi Hosseinabadi, Hossein; Bagheri, Amir Reza; Gigl, T.; Hugenschmidt, C.; Raps, Daniel; Altstädt, Volker
Interrelation between mechanical response, strain field, and local free volume evolution in gla ...
in eXPRESS Polymer Letters volume 12 (2018) issue 1. - page 2-12
doi:10.3144/expresspolymlett.2018.2 ...

Balzereit, Sandra; Proes, Friedrich; Altstädt, Volker; Emmelmann, Claus
Properties of copper modified polyamide 12-powders and their potential for the use as laser dir ...
in Additive Manufacturing volume 23 (2018) . - page 347-354
doi:10.1016/j.addma.2018.08.016 ...

Raps, Daniel; Goodarzi Hosseinabadi, Hossein; Heymann, Lutz; Köppl, Thomas; Altstädt, Volker
Rheological Properties of Thermoplastic Polymers with Dissolved Gases for Foaming Applications
arXiv, 2018. - 21 page
https://arxiv.org/ftp/arxiv/papers/1804/1804.07956 ...

Goodarzi Hosseinabadi, Hossein; Bagheri, Amir Reza; Altstädt, Volker
Shear band propagation in honeycombs : numerical and experimental
in Rapid Prototyping Journal volume 24 (2018) issue 2. - page 477-484
doi:10.1108/RPJ-06-2016-0098 ...

Neumeyer, Thomas; Schreier, Peter; Knöchel, Johannes; Mühlbacher, Mathias; Altstädt, Volker; Keller, Thomas; Yanes Armas, Sonia; Carlsson, Leif A.; Frostig, Yeoshua
Thermoplastic Sandwich Structures with Bead Foam Core : Novel Processing Approaches
12th International Conference on Sandwich Structures ICSS-12 : Proceedings
Lausanne : EPFL - CCLab Composite Construction Laboratory, 2018. - page 161-163
doi:10.5075/epfl-ICSS12-2018-161-163 ...

2017

Polymer Blends and Compatibilization
publ: Altstädt, Volker
Materials
2017. - 142 page
doi:10.3390/books978-3-03842-365-2 ...

Zhu, Yejun; Gensel, Julia; Helmlinger, Lars; Neumeyer, Thomas; Thäter, Stefan; Strube, Franziska; Bauer, Christoph; Rosemann, Bernd; Altstädt, Volker
Application of Amine-functionalized Cellulose Foam for CO2 Capture and Storage in Brewery Indus ...
4th International Conference on Biobased Materials and Composites : Book of Abstracts
Nantes , 2017. - page 77

Standau, Tobias; Göttermann, Svenja; Weinmann, Sandra; Bonten, Christian; Altstädt, Volker
Autoclave foaming of chemically modified polylactide
in Journal of Cellular Plastics volume 53 (2017) issue 5. - page 481-489
doi:10.1177/0021955X16670588 ...

Göttermann, Svenja; Standau, Tobias; Weinmann, Sandra; Altstädt, Volker; Bonten, Christian
Effect of chemical modification on the thermal and rheological properties of polylactide
in Polymer Engineering & Science volume 57 (2017) issue 11. - page 1242-1251
doi:10.1002/pen.24505 ...

Linhares, Felipe Nunes; Kersch, Michaela; Niebergall, Ute; Leite, Marcia Christina Amorim Moreira; Altstädt, Volker; Furtado, Cristina Russi Guimarães
Effect of different sulphur-based crosslink networks on the nitrile rubber resistance to biodie ...
in Fuel volume 191 (2017) . - page 130-139
doi:10.1016/j.fuel.2016.11.060 ...

Castro, L. D. C.; Oliveira, A. D.; Kersch, M.; Altstädt, Volker; Pessan, L. A.
Effect of organoclay incorporation and blending protocol on performance of PA6/ABS nanocomposit ...
in Polymer Engineering & Science volume 57 (2017) issue 10. - page 1147-1154
doi:10.1002/pen.24493 ...

Kothmann, Martin H.; Bakis, Gökhan; Zeiler, Rico; Ziadeh, Mazen; Breu, Josef; Altstädt, Volker
Fatigue crack propagation in epoxy nanocomposites : Influence of the particle geometry
Deformation and fracture behaviour of polymer materials
Cham : Springer, 2017. - page 23-32 . - (Springer Series in Materials Science; 247)
doi:10.1007/978-3-319-41879-7_2 ...

Kropka, Michael; Mühlbacher, Mathias; Neumeyer, Thomas; Altstädt, Volker
From UD-tape to Final Part : A Comprehensive Approach Towards Thermoplastic Composites
in Procedia CIRP volume 66 (2017) . - page 96-100
doi:10.1016/j.procir.2017.03.371 ...
1st CIRP Conference on Composite Materials Parts Manufacturing (CIRP CCMPM 2017), Karlsruhe, Germany

Nießner, Norbert; Altstädt, Volker; Neumeyer, Thomas
Luftig leichte Styrol-Kunststoffe : Optimiertes ABS-Schaumspritzgießen für Leichtgewichtbauteil ...
in Kunststoffe volume 107 (2017) issue 2. - page 73-76

Grünewald, Jonas; Parlevliet, Patricia; Altstädt, Volker
Manufacturing of thermoplastic composite sandwich structures : A review of literature
in Journal of Thermoplastic Composite Materials volume 30 (2017) issue 4. - page 437-464
doi:10.1177/0892705715604681 ...

Goodarzi Hosseinabadi, Hossein; Bagheri, Amir Reza; Altstädt, Volker
A numerical approach to study the post-yield softening in cellular solids : role of microstruct ...
in Acta Mechanica volume 228 (2017) . - page 2005-2016
doi:10.1007/s00707-017-1802-y ...

Goodarzi Hosseinabadi, Hossein; Bagheri, Amir Reza; Avila Gray, L.; Altstädt, Volker; Drechsler, K.
Plasticity in polymeric honeycombs made by photo-polymerization and nozzle based 3D-printing
in Polymer Testing volume 63 (2017) . - page 163-167
doi:10.1016/j.polymertesting.2017.08.008 ...

Raps, Daniel; Köppl, Thomas; Heymann, Lutz; Altstädt, Volker
Rheological behaviour of a high-melt-strength polypropylene at elevated pressure and gas loadin ...
in Rheologica Acta volume 56 (2017) . - page 95-111
doi:10.1007/s00397-016-0988-6 ...

Zeiler, Rico; Kuttner, Christian; Khalid, Ubaid; Kothmann, Martin H.; Dijkstra, Dirk J.; Altstädt, Volker
The role of multi‐walled carbon nanotubes in epoxy nanocomposites and resin transfer molded gla ...
in Polymer Composites volume 38 (2017) issue 9. - page 1849-1863
doi:10.1002/pc.23755 ...

Jiang, Shaohua; Duan, Gaigai; Kuhn, Ute; Mörl, Michaela; Altstädt, Volker; Yarin, Alexander L.; Greiner, Andreas
Spongy Gels by a Top‐Down Approach from Polymer Fibrous Sponges
in Angewandte Chemie volume 129 (2017) issue 12. - page 3333-3336
doi:10.1002/ange.201611787 ...

Jiang, Shaohua; Duan, Gaigai; Kuhn, Ute; Mörl, Michaela; Altstädt, Volker; Yarin, Alexander L.; Greiner, Andreas
Spongy Gels by a Top‐Down Approach from Polymer Fibrous Sponges
in Angewandte Chemie International Edition volume 56 (2017) issue 12. - page 3285-3288
doi:10.1002/anie.201611787 ...

Bahrami, Ronak; Löbling, Tina I.; Schmalz, Holger; Müller, Axel H. E.; Altstädt, Volker
Synergistic effects of Janus particles and triblock terpolymers on toughness of immiscible poly ...
in Polymer volume 109 (2017) . - page 229-237
doi:10.1016/j.polymer.2016.12.044 ...

Moss, Tobias; Paulus, Ilka E.; Raps, Daniel; Altstädt, Volker; Greiner, Andreas
Ultralight sponges of poly(para-xylylene) by template-assisted chemical vapour deposition
in e-Polymers volume 17 (2017) issue 4. - page 255-261
doi:10.1515/epoly-2016-0329 ...

Kropka, Michael; Selvaraj, Karthick; Neumeyer, Thomas; Altstädt, Volker
Vom UD-Tape zum thermoplastischen Faserverbundprodukt
in Lightweight Design volume 10 (2017) . - page 14-19
doi:10.1007/s35725-017-0018-3 ...

Gensel, Julia; Pawelski, Christin; Altstädt, Volker
Welding Quality in Polymer Bead Foams : an in situ SEM Study
Proceedings of the PPS-32 : The 32nd International Conference of the Polymer Processing Society; Conference Papers
Melville, NY : AIP Publications, 2017 (AIP Conference Proceedings; 1914)
doi:10.1063/1.5016721 ...

2016

Balzereit, Sandra; Altstädt, Volker
Back injection molding of FR4 with heat conductive polymers
PROCEEDINGS OF THE REGIONAL CONFERENCE GRAZ 2015 : POLYMER PROCESSING SOCIETY PPS; Conference Papers
Melville, NY : AIP Publications, 2016. - page 020010-1 . - (AIP Conference Proceedings; 1779)
doi:10.1063/1.4965461 ...

Patermann, Simone; Altstädt, Volker
Lignin as renewable raw material for applications in electronics
PROCEEDINGS OF THE REGIONAL CONFERENCE GRAZ 2015 : POLYMER PROCESSING SOCIETY PPS; Conference Papers
Melville, NY : AIP Publications, 2016. - page 060003-1 . - (AIP Conference Proceedings; 1779)
doi:10.1063/1.4965524 ...

Göttermann, Svenja; Weinmann, Sandra; Bonten, Christian; Standau, Tobias; Altstädt, Volker
Modified standard polylactic acid (PLA) for extrusion foaming
PROCEEDINGS OF THE REGIONAL CONFERENCE GRAZ 2015 : POLYMER PROCESSING SOCIETY PPS; Conference Papers
Melville, NY : AIP Publications, 2016. - page 060001-1 . - (AIP Conference Proceedings; 1779)
doi:10.1063/1.4965522 ...

Kropka, Michael; Mühlbacher, Mathias; Neumeyer, Thomas; Altstädt, Volker
Thermoplastic unidirectional tapes : an appropriate alternative to woven fabric based organo sh ...
Proceedings of the 17th European Conference on Composite Materials : ECCM17 - 17th European Conference on Composite Materials, 26-30th June 2016, Munich, Germany
Augsburg : MAI Carbon Cluster Management GmbH, 2016

Kropka, Michael; Altstädt, Volker
Leicht und stark : Wolfsbacher Forscher entwickeln Prototypen für Bauteile aus Carbonbändern
Nordbayerischer Kurier
in Nordbayerischer Kurier. (16. April 2016) . - page 18

Schreier, Peter; Mühlbacher, Mathias; Fafara, Michael; Neumeyer, Thomas; Altstädt, Volker
Sandwichkonzepte auf Basis thermoplastischer Partikelschäume
in Plastverarbeiter (2016)

Altstädt, Volker; Breu, Josef
2nd Generation Layered Silicates Nanocomposites with improved Mechanical and Electrical Propert ...
2016
World Congress on Recent Advances in Nanotechnology : RAN’16, Prag, Tschechien

Niessner, Norbert; Altstädt, Volker; Neumeyer, Thomas
Acrylnitril-Butadien-Styrol (ABS) : Mit moderatem Wachstum erschließt sich ABS immer mehr Anwen ...
in Kunststoffe volume 106 (2016) issue 10. - page 96-101

Mörl, Stefan; Kastner, Friedrich; Grajewski, Franz; Ludwig, Ernst; Altstädt, Volker
Aus Zwei mach Eins : Einstufige Produktion von Polymer-Metall-Hybriden und Organoblechen mittel ...
in Kunststoffe volume 106 (2016) issue 6. - page 52-54

Lengsfeld, Hauke; Wolff-Fabris, Felipe; Krämer, Johannes; Lavalle, Javier; Altstädt, Volker
Composite Technology : Prepregs and Monolithic Part Fabrication Technologies
München : Hanser, 2016. - XV, 205 page
doi:10.3139/9781569906002 ...

Castro, L. D. C.; Oliveira, A. D.; Kersch, M.; Altstädt, Volker; Pessan, L. A.
Effects of mixing protocol on morphology and properties of PA6/ABS blends compatibilized with M ...
in Journal of Applied Polymer Science volume 133 (2016) issue 27
doi:10.1002/app.43612 ...

Kropka, Michael; Mühlbacher, Mathias; Neumeyer, Thomas; Altstädt, Volker
Faserverbundbauteile im Minutentakt : Großserientaugliche Prozesskette vom UD-Tape zum thermopl ...
in Kunststoffe volume 106 (2016) issue 10. - page 164-168

Schartel, Bernhard; Perret, Birgit; Dittrich, Bettina; Ciesielski, Michael; Krämer, Johannes; Müller, Patrick; Altstädt, Volker; Zang, Lin; Döring, Manfred
Flame Retardancy of Polymers : The Role of Specific Reactions in the Condensed Phase
in Macromolecular Materials and Engineering volume 301 (2016) issue 1. - page 9-35
doi:10.1002/mame.201500250 ...

Hausner, Josef; Fischer, Bianca; Stöter, Matthias; Edenharter, Andreas; Schmid, Jasmin; Kunz, Raphael; Rosenfeldt, Sabine; Altstädt, Volker; Breu, Josef
Increasing time of ignition for PS-clay nanocomposites filled with [Fe(bpy)₃]²⁺-modified hector ...
in Polymer Degradation and Stability volume 128 (2016) . - page 141-148
doi:10.1016/j.polymdegradstab.2016.03.015 ...

Linhares, Felipe N.; Kersch, Michaela; Sousa, Ana Maria F.; Leite, Marcia Christina A. M.; Altstädt, Volker; Furtado, Cristina R. G.
Influence of Binary Curing System on the Nitrile Rubber Mechanical Properties
in Macromolecular Symposia volume 367 (2016) issue 1. - page 55-62
doi:10.1002/masy.201500133 ...
Brazilian Polymer Conference, Natal, Brazil

Kersch, M.; Schmidt, Hans-Werner; Altstädt, Volker
Influence of different beta-nucleating agents on the morphology of isotactic polypropylene and ...
in Polymer volume 98 (2016) . - page 320-326
doi:10.1016/j.polymer.2016.06.051 ...

Baumgart, Christin; Weiß, D.; Altstädt, Volker
Influence of different tempering conditions on the adhesion properties of thermoplastic/liquid ...
in Polymer Engineering & Science volume 56 (2016) issue 8. - page 849-855
doi:10.1002/pen.24313 ...

Zeiler, Rico; Bakis, Gökhan; Forero, Stefan; Benra, Jan; Neumeyer, Thomas; Altstädt, Volker
Kleiner Beitrag, starke Wirkung : Mit Carbon Nanotubes modifizierte Epoxidharze als Matrix in F ...
in Kunststoffe volume 106 (2016) issue 2. - page 35-39

Göttermann, Svenja; Weinmann, Sandra; Bonten, Christian; Standau, Tobias; Altstädt, Volker
Luftiges Standardmaterial : Schäumbare Polylactide durch reaktive Extrusion
in Kunststoffe volume 106 (2016) issue 1. - page 68-71

Bärwinkel, Stefanie; Seidel, Andreas; Hobeika, Sven; Hufen, Ralf; Mörl, Michaela; Altstädt, Volker
Morphology Formation in PC/ABS Blends during Thermal Processing and the Effect of the Viscosity ...
in Materials volume 9 (2016) issue 8
doi:10.3390/ma9080659 ...

Schreier, Peter; Mühlbacher, Mathias; Fafara, Michael; Neumeyer, Thomas; Altstädt, Volker
Multi-Materialsysteme : Sandwich mit thermoplastischen Partikelschäumen
in Emobility tec volume 6 (2016) issue 2. - page 58-61

Kropka, Michael; Altstädt, Volker
Multiworking an zwei Tischen : Innovative Legetechnologie für thermoplastische Faserverbunde
in Carbon Composites Magazin (2016) issue 2. - page 47

Bärwinkel, Stefanie; Bahrami, Ronak; Löbling, Tina I.; Schmalz, Holger; Müller, Axel H. E.; Altstädt, Volker
Polymer Foams Made of Immiscible Polymer Blends Compatibilized by Janus Particles : Effect of C ...
in Advanced Engineering Materials volume 18 (2016) issue 5. - page 814-825
doi:10.1002/adem.201500387 ...

Altstädt, Volker
Polymere : Werkstoffe der Zukunft
in Spektrum volume 12 (2016) issue 1. - page 58-61

Raps, Daniel; Sanchez-Vazquez, Sandra A.; Heymann, Lutz; Altstädt, Volker
Rheology and Crystallization of Polypropylene
in G.I.T. Laboratory Journal (2016) . - page 42-44

Fafara, Michael; Standau, Tobias; Neumeyer, Thomas; Altstädt, Volker
Temperaturbeständigkeit : Wenn EPP und EPS ins Schwitzen kommen
in K Magazin volume 2 (2016) issue 4

Mühlbacher, Mathias; Hornfeck, Christoph; Neumeyer, Thomas; Altstädt, Volker
Thermoplastische Sandwichstrukturen aus Luftfahrtmaterialien
in Lightweight Design volume 9 (2016) issue 4. - page 44-49
doi:10.1007/s35725-016-0039-3 ...

Baumgart, Christin; Höll, Benedikt; Neumeyer, Thomas; Altstädt, Volker
Ein ungleiches Paar hält zusammen : Polyolefine als Trägermaterial für Thermoplast-Flüssigsilik ...
in Kunststoffe volume 106 (2016) issue 8. - page 104-107

Cestari, Sibele P.; Mendes, Luis C.; Altstädt, Volker; Lopes, Léa M. A.
Upcycling Polymers and Natural Fibres Waste : Properties of a Potential Building Material
in Recycling volume 1 (2016) issue 1. - page 205-218
doi:10.3390/recycling1010205 ...

2015

Neumeyer, Thomas; Bauernfeind, Annika; Eigner, Verena; Müller, Claudia; Pramberger, Kerstin; Altstädt, Volker
Novel Epoxy Prepreg Resins for Aircraft Interiors Based on Combinations of Halogen-Free Flame R ...
2015
Deutscher Luft- und Raumfahrtkongress 2015, Rostock, Deutschland

Mörl, Stefan; Altstädt, Volker
A novel Tool for continuous Processing of Polymer-metal-Hybrids
2015
http://www.iccm-central.org/Proceedings/ICCM20proc ...
ICCM20 : 20th International Conference on Composite Materials, Copenhagen, Denmark

Göttermann, Svenja; Weinmann, Sandra; Bonten, Christian; Standau, Tobias; Altstädt, Volker
Modifiziertes Polylactid für die Schaumextrusion
2015
https://www.google.de/url?sa=t&rct=j&q=&esrc=s&sou ...
24. Stuttgarter Kunststoffkolloquium, Stuttgart, Deutschland

Altstädt, Volker; Krausch, Georg
Polymer foams
Polymer
2015. - 596 page

Kothmann, Martin H.; Ziadeh, Mazen; Bakis, Gökhan; Rios de Anda, Agustin; Breu, Josef; Altstädt, Volker
Analyzing the influence of particle size and stiffness state of the nanofiller on the mechanica ...
in Journal of Materials Science volume 50 (2015) issue 14. - page 4845-4859
doi:10.1007/s10853-015-9028-7 ...

Yin, Huajie; Dittrich, Bettina; Farooq, Muhammad; Kerling, Sabrina; Wartig, Karen-Alessa; Hofmann, Daniel; Huth, Christian; Okolieocha, Chimezie; Altstädt, Volker; Schönhals, Andreas; Schartel, Bernhard
Carbon-based nanofillers/Poly(butylene terephthalate) : thermal, dielectric, electrical and rhe ...
in Journal of Polymer Research volume 22 (2015) issue 7
doi:10.1007/s10965-015-0785-4 ...

Abbasi Moud, Aref; Javadi, Azizeh; Nazockdast, Hossein; Fathi, Amir; Altstädt, Volker
Effect of dispersion and selective localization of carbon nanotubes on rheology and electrical ...
in Journal of Polymer Science Part B: Polymer Physics volume 53 (2015) issue 5. - page 368-378
doi:10.1002/polb.23638 ...

Fischer, Bianca; Ziadeh, Mazen; Breu, Josef; Altstädt, Volker
Evaluierung von Struktur-Eigenschaftsbeziehungen in PMMA-Nanokompositen auf Basis einer neuen G ...
in Zeitschrift Kunststofftechnik = Journal of Plastics Technology volume 11 (2015) issue 3. - page 131-156

Altstädt, Volker
Extrusionsschaum aus Polylactid : ein nachhaltiges Material
in Jahresmagazin Kunststofftechnik (2015)

Lengsfeld, Hauke; Wolff-Fabris, Felipe; Krämer, Johannes; Lacalle, Javier; Altstädt, Volker
Faserverbundwerkstoffe : Prepregs und ihre Verarbeitung
München : Hanser, 2015. - XIV, 209 page
doi:10.3139/9783446440807 ...

Kothmann, M. H.; Zeiler, Rico; Rios de Anda, A.; Brückner, A.; Altstädt, Volker
Fatigue crack propagation behaviour of epoxy resins modified with silica-nanoparticles
in Polymer volume 60 (2015) . - page 157-163
doi:10.1016/j.polymer.2015.01.036 ...

Göttermann, Svenja; Weinmann, Sandra; Bonten, Christian; Standau, Tobias; Altstädt, Volker
Foams made from modified standard PLA
in bioplastics MAGAZINE volume 10 (2015) issue 4. - page 38-40

Fathi, Amir; Keller, Jan-Hendrik; Altstädt, Volker
Full-field shear analyses of sandwich core materials using Digital Image Correlation (DIC)
in Composites Part B: Engineering volume 70 (2015) . - page 156-166
doi:10.1016/j.compositesb.2014.10.045 ...

Njuhovic, E.; Bräu, M.; Wolff-Fabris, Felipe; Starzynski, Krzysztof; Altstädt, Volker
Identification of failure mechanisms of metallised glass fibre reinforced composites under tens ...
in Composites Part B: Engineering volume 81 (2015) . - page 1-13
doi:10.1016/j.compositesb.2015.06.018 ...

Neumeyer, Thomas; Staudigel, Christian; Bonotto, Giancarlo; Altstädt, Volker
Influence of an imidazolium salt on the curing behaviour of an epoxy-based hot-melt prepreg sys ...
in CEAS Aeronautical Journal volume 6 (2015) . - page 31-37
doi:10.1007/s13272-014-0127-y ...

Patermann, Simone; Altstädt, Volker
Influence of different crosslinking systems on the mechanical and morphological properties of t ...
PROCEEDINGS OF PPS-30 : The 30th International Conference of the Polymer Processing Society; Conference Papers
Melville, NY : AIP Publications, 2015. - page No. 120002 . - (AIP Conference Proceedings; 1664)
doi:10.1063/1.4918492 ...

Okolieocha, Chimezie; Köppl, Thomas; Kerling, Sabrina; Tölle, Folke J.; Fathi, Amir; Mülhaupt, Rolf; Altstädt, Volker
Influence of graphene on the cell morphology and mechanical properties of extruded polystyrene ...
in Journal of Cellular Plastics volume 51 (2015) issue 4. - page 413-426
doi:10.1177/0021955X14566084 ...

Baumgart, Christin; Hübner, Fabian; Altstädt, Volker
Kleine Lücken zum leichteren Drücken : Mikrosphären in Flüssigsilikonen schäumen
in Kunststoffe volume 105 (2015) issue 11. - page 84-87

Fathi, Amir; Altstädt, Volker
Mechanical Properties of Multifunctional Foam Core Materials
Multifunctionality of Polymer Composites : Challenges and New Solutions
Amsterdam : Elsevier, 2015. - page 262-301
doi:10.1016/B978-0-323-26434-1.00008-8 ...

Bahrami, Ronak; Löbling, Tina I.; Schmalz, Holger; Müller, Axel H. E.; Altstädt, Volker
Micromechanics of "raspberry" morphology in PPE/SAN polymer blends compatibilized with linear A ...
in Polymer volume 80 (2015) . - page 52-63
doi:10.1016/j.polymer.2015.10.039 ...

Raps, Daniel; Hossieny, Nemat; Park, Chul B.; Altstädt, Volker
Past and present developments in polymer bead foams and bead foaming technology
in Polymer volume 56 (2015) . - page 5-19
doi:10.1016/j.polymer.2014.10.078 ...

Okolieocha, Chimezie; Beckert, Fabian; Herling, Markus M.; Breu, Josef; Mülhaupt, Rolf; Altstädt, Volker
Preparation of microcellular low-density PMMA nanocomposite foams : Influence of different fill ...
in Composites Science and Technology volume 118 (2015) . - page 108-116
doi:10.1016/j.compscitech.2015.08.016 ...

Altstädt, Volker
Prüfung von Verbundwerkstoffen
Kunststoffprüfung. 3., aktualisierte Auflage
München : Hanser, 2015. - page 547-600
doi:10.3139/9783446443907.010 ...

Hausner, Josef; Ziadeh, Mazen; Fischer, Bianca; Kalo, Hussein; Schmid, Jasmin; Kunz, Raphael; Altstädt, Volker; Breu, Josef
Transfer Batch Blending, an Innovative Solvent/Solid assisted Method for Melt Compounding to Ac ...
in Composites Science and Technology volume 114 (2015) . - page 34-41
doi:10.1016/j.compscitech.2015.03.019 ...

Duan, Gaigai; Jiang, Shaohua; Jérôme, Valérie; Wendorff, Joachim H.; Fathi, Amir; Uhm, Jacqueline S.; Altstädt, Volker; Herling, Markus M.; Breu, Josef; Freitag, Ruth; Agarwal, Seema; Greiner, Andreas
Ultralight, Soft Polymer Sponges by Self-Assembly of Short Electrospun Fibers in Colloidal Disp ...
in Advanced Functional Materials volume 25 (2015) issue 19. - page 2850-2856
doi:10.1002/adfm.201500001 ...

Ranocha, Katja; Altstädt, Volker; Balzereit, Sandra
Weg mit der Wärme
in E-&-E-Faszination Elektronik (2015) . - page 226-228

Okolieocha, Chimezie; Raps, Daniel; Subramaniam, Kalaivani; Altstädt, Volker
Microcellular to nanocellular polymer foams : Progress (2004–2015) and future directions ; A re ...
in European Polymer Journal volume 73 (2015) . - page 500-519
doi:10.1016/j.eurpolymj.2015.11.001 ...

2014

Linhares, Felipe; Mörl, Michaela; Altstädt, Volker; Furtado, Cristina R. G.
INFLUÊNCIA DA ABSORÇÃO DE BIODIESEL NAS PROPRIEDADES DA BORRACHA NITRÍLICA
2014
https://www.proceedings.blucher.com.br/download-pd ...
COBEQ 2014 - 20. Congresso Brasileiro de Engenharia Química, Florianópolis, SC, Brasil

Kothmann, Martin H.; Bakis, Gökhan; Zeiler, Rico; Ziadeh, Mazen; Köppel, Andreas; Breu, Josef; Altstädt, Volker
Influence of nanoparticles on the fatigue crack growth behavior of epoxy resins
2014
https://www.google.de/url?sa=t&rct=j&q=&esrc=s&sou ...
ECCM16 - 16th European Conference on Composite Materials, Sevilla, Spain

Rios de Anda, Agustin; Neumeyer, Thomas; Lengsfeld, H.; Rademaker, T.; Altstädt, Volker
Recycled carbon-fiber fleeces as a green alternative for reinforcing in-plane mechanical proper ...
2014
https://www.researchgate.net/profile/Agustin_Rios_ ...
ECCM16 - 16th European Conference on Composite Materials, Sevilla, Spain

Ries, Stefan; Spörrer, Andreas N. J.; Altstädt, Volker
Foam injection molding of thermoplastic elastomers : Blowing agents, foaming process and charac ...
PROCEEDINGS OF PPS-29 : The 29th International Conference of the Polymer Processing Society; Conference Papers
Melville, NY : AIP Publications, 2014. - page 401-410 . - (AIP Conference Proceedings; 1593)
doi:10.1063/1.4873809 ...

Patermann, Simone; Altstädt, Volker
PP/EPDM-blends by dynamic vulcanization : Influence of increasing peroxide concentration on mec ...
PROCEEDINGS OF PPS-29 : The 29th International Conference of the Polymer Processing Society; Conference Papers
Melville, NY : AIP Publications, 2014. - page 516-519 . - (AIP Conference Proceedings; 1593)
doi:10.1063/1.4873834 ...

Tröger, Katlen; Khanpour Darka, R.; Neumeyer, Thomas; Altstädt, Volker
Tailored benzoxazines as novel resin systems for printed circuit boards in high temperature e-m ...
PROCEEDINGS OF PPS-29 : The 29th International Conference of the Polymer Processing Society; Conference Papers
Melville, NY : AIP Publications, 2014. - page 678-682 . - (AIP Conference Proceedings; 1593)
doi:10.1063/1.4873870 ...

Kempf, Manuel; Skrabala, Otto; Altstädt, Volker
Acoustic emission analysis for characterisation of damage mechanisms in fibre reinforced thermo ...
in Composites Part B: Engineering volume 56 (2014) . - page 477-483
doi:10.1016/j.compositesb.2013.08.080 ...

Sprenger, Stephan; Kothmann, Martin Heinz; Altstädt, Volker
Carbon fiber-reinforced composites using an epoxy resin matrix modified with reactive liquid ru ...
in Composites Science and Technology volume 105 (2014) . - page 86-95
doi:10.1016/j.compscitech.2014.10.003 ...

Brehme, Sven; Köppl, Thomas; Schartel, Bernhard; Altstädt, Volker
Competition in aluminium phosphinate-based halogen-free flame retardancy of poly(butylene terep ...
in e-Polymers volume 14 (2014) issue 3. - page 193-208
doi:10.1515/epoly-2014-0029 ...

Traßl, Christian; Altstädt, Volker; Schreier, P.
Concepts for particle foam based ultralight automotive interior parts
PROCEEDINGS OF PPS-29 : The 29th International Conference of the Polymer Processing Society; Conference Papers
Melville,NY : AIP Publishing, 2014. - page 354-357 . - (AIP Conference Proceedings; 1593)
doi:10.1063/1.4873799 ...

Piedade Cestari, Sibele; Mendes, Luis C.; Altstädt, Volker; Biasotto Mano, Eloisa; França da Silva, Daniela; Keller, Jan-Hendrik
Crystallization Kinetics of Recycled High Density Polyethylene and Coffee Dregs Composites
in Polymers and Polymer Composites volume 22 (2014) issue 6. - page 541-550
doi:10.1177/096739111402200606 ...

Kühr, Christin; Spörrer, Andreas N. J.; Altstädt, Volker
Determination of adhesion between thermoplastic and liquid silicone rubbers in hard-soft-combin ...
PROCEEDINGS OF PPS-29 : The 29th International Conference of the Polymer Processing Society; Conference Papers
Melville, NY : AIP Publications, 2014. - page 142-145 . - (AIP Conference Proceedings; 1593)
doi:10.1063/1.4873751 ...

Köppl, Thomas; Raps, Daniel; Altstädt, Volker
E-PBT—Bead foaming of poly(butylene terephthalate) by underwater pelletizing
in Journal of Cellular Plastics volume 50 (2014) issue 5. - page 475-487
doi:10.1177/0021955X14528524 ...

Götz, Christian; Lim, Goy Teck; Puskas, J. E.; Altstädt, Volker
The effect of carbon black reinforcement on the dynamic fatigue and creep of polyisobutylene-ba ...
in Journal of the Mechanical Behavior of Biomedical Materials volume 39 (2014) . - page 355-365
doi:10.1016/j.jmbbm.2014.08.008 ...

Müller, Johannes; Spörrer, Andreas N. J.; Altstädt, Volker
Foam injection moulding of a TPO/TPC-blend and the effect of different nucleating agents on the ...
PROCEEDINGS OF PPS-29 : The 29th International Conference of the Polymer Processing Society; Conference Papers
Melville, NY : AIP Publications, 2014. - page 367-373 . - (AIP Conference Proceedings; 1593)
doi:10.1063/1.4873802 ...

Njuhovic, Edin; Neumeyer, Thomas; Glöde, Stefan; Altstädt, Volker
Eine Frage der Haftung : Oberflächenmodifikation duromerer Faserverbundkunststoffe
in Kunststoffe volume 104 (2014) issue 7. - page 82-86

Schopp, Stephanie; Thomann, Ralf; Ratzsch, Karl‐Friedrich; Kerling, Sabrina; Altstädt, Volker; Mülhaupt, Rolf
Functionalized Graphene and Carbon Materials as Components of Styrene‐Butadiene Rubber Nanocomp ...
in Macromolecular Materials and Engineering volume 299 (2014) issue 3. - page 319-329
doi:10.1002/mame.201300127 ...

Altstädt, Volker; Beck, Jonas; Mühlbacher, Mathias
Großserientaugliche thermoplastische Sandwich-Strukturen
in Lightweight Design volume 7 (2014) issue 4. - page 56-62
doi:10.1365/s35725-014-0400-3 ...

Baumgart, Christin; Krug, K.; Altstädt, Volker
Hitzebeständige 2K-Verbunde
in Kunststoffe volume 104 (2014) issue 10. - page 134-137

Njuhovic, Edin; Bräu, M.; Wolff-Fabris, Felipe; Starzynski, Krzysztof; Altstädt, Volker
Identification of interface failure mechanisms of metallized glass fibre reinforced composites ...
in Composites Part B: Engineering volume 66 (2014) . - page 443-452
doi:10.1016/j.compositesb.2014.06.018 ...

Bahrami, Ronak; Löbling, Tina I.; Gröschel, André H.; Schmalz, Holger; Müller, Axel H. E.; Altstädt, Volker
The Impact of Janus Nanoparticles on the Compatibilization of Immiscible Polymer Blends under T ...
in ACS Nano volume 8 (2014) issue 10. - page 10048-10056
doi:10.1021/nn502662p ...

Kersch, M.; Pischke, L.; Schmidt, Hans-Werner; Altstädt, Volker
Influence of trisamide-based additives on the morphological and mechanical properties of isotac ...
in Polymer volume 55 (2014) issue 15. - page 3227-3233
doi:10.1016/j.polymer.2014.05.030 ...

Traßl, Christian; Altstädt, Volker
Leichtbau- und Designwerkstoffe der Zukunft
in Kunststoffe volume 104 (2014) issue 2. - page 73-76

Zeiler, Rico; Khalid, U.; Kuttner, Christian; Kothmann, Martin H.; Dijkstra, D. J.; Fery, Andreas; Altstädt, Volker
Liquid composite molding-processing and characterization of fiber-reinforced composites modifie ...
Altstädt, Volker (Hrsg.): Proceedings of PPS-29 : the 29th International Conference of the Polymer Processing Society - conference papers
Melville, NY : American Institute of Physics Publ., 2014. - page 503-507 . - (AIP Conference Proceedings; 1593)
doi:10.1063/1.4873831 ...

Ziadeh, Mazen; Fischer, Bianca; Schmid, Jasmin; Altstädt, Volker; Breu, Josef
On the importance of specific interface area in clay nanocomposites of PMMA filled with synthet ...
in Polymer volume 55 (2014) issue 16. - page 3770-3781
doi:10.1016/j.polymer.2014.05.063 ...

Njuhovic, Edin; Altstädt, Volker
Polymer Engineering : Metallisierte Faserverbundstrukturen; wie Kunststoffe zu alternativen Ant ...
in Jahresmagazin Ingenieurwissenschaften (2014) . - page 20-22

Standau, Tobias; Altstädt, Volker
Polymer-Schaum aus Pflanzen : ein nachhaltiges Material
in Spektrum volume 10 (2014) issue 2. - page 83

Raps, Daniel; Köppl, Thomas; Rios de Anda, Agustin; Altstädt, Volker
Rheological and crystallisation behaviour of high melt strength polypropylene under gas-loading
in Polymer volume 55 (2014) issue 6. - page 1537-1545
doi:10.1016/j.polymer.2014.01.036 ...

Cestari, Sibele P.; Mendes, Luis C.; Altstädt, Volker; Lopes, L. M. de A.
Rheological Properties of Composites of Recycled High Density Polyethylene and Coffee Dregs
2014
NICE : 2nd International Conference on Bioinspired and Biobased Chemistry & Materials, 2014, Nice, France

Njuhovic, Edin; Altstädt, Volker
RTM Harzsystem von Huntsman : Entwicklung von kryogenen Speichersystemen aus Verbundwerkstoffen
in UBT aktuell (2014) issue 4. - page 9

Schreier, Peter; Traßl, Christian; Altstädt, Volker
Surface modification of polypropylene based particle foams
PROCEEDINGS OF PPS-29 : The 29th International Conference of the Polymer Processing Society; Conference Papers
Melville, NY : AIP Publishing, 2014. - page 378-382 . - (AIP Conference Proceedings; 1593)
doi:10.1063/1.4873804 ...

Ziadeh, Mazen; Weiß, Stephan; Fischer, Bianca; Förster, Stephan; Altstädt, Volker; Müller, Axel H. E.; Breu, Josef
Towards completely miscible PMMA nanocomposites reinforced by shear-stiff, nano-mica
in Journal of Colloid and Interface Science volume 425 (2014) . - page 143-151
doi:10.1016/j.jcis.2014.03.040 ...

Altstädt, Volker
Welcome Remarks by the Chairman of "The 29th International Conference of the Polymer Processing ...
PROCEEDINGS OF PPS-29 : The 29th International Conference of the Polymer Processing Society; Conference Papers
Melville, NY : AIP Publishing, 2014. - page 2-3 . - (AIP Conference Proceedings; 1593)
doi:10.1063/1.4873723 ...

2013

Kothmann, Martin H.; Zeiler, Rico; Altstädt, Volker
Mechanical properties of epoxy nanocomposites modified with nano-silica for high voltage applic ...
2013
International Conference of the Polymer Processing Society, Nürnberg, Deutschland

Apeldorn, Thomas; Keilholz, Clemens; Wolff‐Fabris, Felipe; Altstädt, Volker
Dielectric properties of highly filled thermoplastics for printed circuit boards
in Journal of Applied Polymer Science volume 128 (2013) issue 6. - page 3758-3770
doi:10.1002/app.38602 ...

Mariano, Roberta M.; Nunes, Regina C. R.; Visconte, Leila L. Y.; Altstädt, Volker
Effect of montmorillonite and cellulose II hybridization on mechanical properties of natural ru ...
in Polímeros : Ciência e Tecnologia volume 23 (2013) issue 1. - page 123-127
doi:10.1590/S0104-14282013005000012 ...

Martins, Johnny N.; Kersch, Michaela; Altstädt, Volker; Oliveira, Ricardo V. B.
Electrical conductivity of poly(vinylidene fluoride)/polyaniline blends under oscillatory and s ...
in Polymer Testing volume 32 (2013) issue 5. - page 862-869
doi:10.1016/j.polymertesting.2013.04.001 ...

Neumeyer, Thomas; Bonotto, Giancarlo; Krämer, Johannes; Altstädt, Volker; Döring, Manfred
Fire behaviour and mechanical properties of an epoxy hot-melt resin for aircraft interiors
in Composite Interfaces volume 20 (2013) issue 6. - page 443-455
doi:10.1080/15685543.2013.807153 ...

Köppl, Thomas; Brehme, Sven; Pospiech, Doris; Fischer, Oliver; Wolff‐Fabris, Felipe; Altstädt, Volker; Schartel, Bernhard; Döring, Manfred
Influence of polymeric flame retardants based on phosphorus‐containing polyesters on morphology ...
in Journal of Applied Polymer Science volume 128 (2013) issue 5. - page 3315-3324
doi:10.1002/app.38520 ...

Njuhovic, E.; Witt, A.; Kempf, M.; Wolff-Fabris, Felipe; Glöde, Stefan; Altstädt, Volker
Influence of the composite surface structure on the peel strength of metallized carbon fibre-re ...
in Surface and Coatings Technology volume 232 (2013) . - page 319-325
doi:10.1016/j.surfcoat.2013.05.025 ...

Fathi, Amir; Wolff-Fabris, Felipe; Altstädt, Volker; Gätzi, Roman
An investigation on the flexural properties of balsa and polymer foam core sandwich structures ...
in Journal of Sandwich Structures and Materials volume 15 (2013) issue 5. - page 487-508
doi:10.1177/1099636213487004 ...

Ruzicki Corsetti, Rodrigo; Neumeyer, Thomas; May, Manuela; Jandrey, Daniel; Altstädt, Volker; Medeiros Cardozo, Nilo Sérgio
Modeling and estimation of parameters for the curing of an epoxy/amine system
in Polymer Testing volume 32 (2013) issue 4. - page 647-654
doi:10.1016/j.polymertesting.2013.03.011 ...

Ruckdäschel, Holger; Sandler, Jan K. W.; Altstädt, Volker
On the Friction and Wear of Carbon Nanofibre-Reinforced PEEK-Based Polymer Nanocomposites
Tribology of polymeric nanocomposites : friction and wear of bulk materials and coatings. 2nd Edition
Amsterdam : Elsevier, Butterworth-Heinemann, 2013 (Tribology and Interface Engineering Series; 55)

Martins, Johnny N.; Kersch, Michaela; Altstädt, Volker; Oliveira, Ricardo V. B.
Poly(vinylidene fluoride)/polyaniline/carbon nanotubes nanocomposites : Influence of preparatio ...
in Polymer Testing volume 32 (2013) issue 8. - page 1511-1521
doi:10.1016/j.polymertesting.2013.10.001 ...

Cestari, Sibele P.; Mendes, Luis C.; da Silva, Daniela França; Chimanowsky, Jorge Pereira; Altstädt, Volker; Demchuk, Vitaly; Lang, Anneliese; Leonhardt, Rodrigo Gheno; Keller, Jan-Hendrik
Properties of recycled high density polyethylene and coffee dregs composites
in Polímeros : Ciência e Tecnologia volume 23 (2013) issue 6. - page 733-737
doi:10.4322/polimeros.2014.011 ...

2012

Kempf, M.; Skrabala, Otto; Altstädt, Volker
Acoustic emission analysis for quantitative characterisation of the damage behaviour in fibre r ...
Composites at Venice : : 15th European Conference on Composite Materials, ECCM 15
Venice , 2012

Kersch, Michaela; Wolff-Fabris, Felipe; Stumpf, Marieluise; Richter, Florian; Schmidt, Hans-Werner; Altstädt, Volker
Barrier Properties of Polyamide 12 Films Nucleated with Talc
in Zeitschrift Kunststofftechnik = Journal of Plastics Technology volume 8 (2012) issue 4. - page 331-338
https://www.kunststoffe.de/en/specialized-informat ...

Njuhovic, E.; Bradshaw, I.; Neidhardt, F.; Altstädt, Volker
Chemical surface treatment of pes modified epoxy resin and the influence of its morphology on t ...
2012
15th European Conference on Composite Materials : ECCM 15, Venice, Italy

Bieligmeyer, Matthias; Taheri, Sara Mehdizadeh; German, Ian; Boisson, Christophe; Probst, Christian; Milius, Wolfgang; Altstädt, Volker; Breu, Josef; Schmidt, Hans-Werner; D'Agosto, Franck; Förster, Stephan
Completely Miscible Polyethylene Nanocomposites
in Journal of the American Chemical Society volume 134 (2012) issue 44. - page 18157-18160
doi:10.1021/ja307297c ...

Neumeyer, Thomas; Kempf, Manuel; Krämer, Johannes; Wolff-Fabris, Felipe; Altstädt, Volker
Duromere Matrixsysteme : Leichter in der Luft, im Wind und auf der Straße
in Kunststoffe volume 102 (2012) issue 11. - page 72-77

Behme, Sven; Schartel, Bernhard; Bykov, Y.; Ciesielski, Michael; Döring, M.; Fischer, O.; Pospiech, D.; Köppl, T.; Altstädt, Volker
Flame Retardancy Mechanisms and Performance of a Halogen-free Phosphorus Polyester in PBT
22nd Annual Conference on Recent Advances in Flame Retardancy of Polymeric Materials 2011
Red Hook, NY : Curran, 2012. - page 325-340

Altstädt, Volker; Spörrer, Andreas N. J.; Mühlbacher, Mathias; Michel, Peter; Seidel, Sonja
Großserientauglicher Hochleistungsleichtbau mit UD-Tapes
in Lightweight Design volume 5 (2012) issue 2. - page 18-25
doi:10.1365/s35725-012-0084-5 ...

Fischer, Bianca; Ziadeh, Mazen; Pfaff, André; Breu, Josef; Altstädt, Volker
Impact of large aspect ratio, shear-stiff, mica-like clay on mechanical behavior of PMMA/clay n ...
in Polymer volume 53 (2012) issue 15. - page 3230-3237
doi:10.1016/j.polymer.2012.04.055 ...

Götz, C.; Lim, G. T.; Puskas, J. E.; Altstädt, Volker
Investigation of structure–property relationships of polyisobutylene-based biomaterials : Morph ...
in Journal of the Mechanical Behavior of Biomedical Materials volume 10 (2012) . - page 206-215
doi:10.1016/j.jmbbm.2012.02.016 ...

Handge, Ulrich A.; Galeski, Andrzej; Kim, Sung Chul; Dijkstra, Dirk J.; Götz, Christian; Fischer, Frank; Lim, Goy Teck; Altstädt, Volker; Gabriel, Claus; Weber, Martin; Steininger, Helmut
Melt processing, mechanical, and fatigue crack propagation properties of reactively compatibili ...
in Journal of Applied Polymer Science volume 124 (2012) issue 1. - page 740-754
doi:10.1002/app.35055 ...

Drescher, O.; Njuhovic, E.; Glöde, Stefan; Persson, J.; Altstädt, Volker
Metallic permeation barrier for cryogenic composite propellant storage and transfer application ...
Proceedings of the 12th European Conference on Spacecraft Structures, Materials & Environmental Testing
Noordwijk : ESA Communications, 2012

Pospiech, Doris; Häußler, Liane; Korwitz, Andreas; Fischer, Oliver; Starke, Sandra; Jehnichen, Dieter; Köppl, Thomas; Altstädt, Volker
The miscibility of poly(butylene terephthalate) (PBT) with phosphorus polyester flame retardant ...
in High Performance Polymers volume 24 (2012) issue 1. - page 64-73
doi:10.1177/0954008311431116 ...

Müller, Johannes; Spörrer, Andreas N. J.; Altstädt, Volker
Overmoulding of Plane Structural Foamed Parts with a Second Thermoplastic Component
in Cellular Polymers volume 31 (2012) issue 4. - page 223-240
doi:10.1177/026248931203100403 ...

Brehme, Sven; Köppl, Thomas; Schartel, Bernhard; Fischer, Oliver; Altstädt, Volker; Pospiech, Doris; Döring, Manfred
Phosphorus Polyester : an Alternative to Low‐Molecular‐Weight Flame Retardants in Poly(Butylene ...
in Macromolecular Chemistry and Physics volume 213 (2012) issue 22. - page 2386-2397
doi:10.1002/macp.201200072 ...

Köppl, Thomas; Brehme, Sven; Wolff‐Fabris, Felipe; Altstädt, Volker; Schartel, Bernhard; Döring, Manfred
Structure−property relationships of halogen‐free flame‐retarded poly(butylene terephthalate) an ...
in Journal of Applied Polymer Science volume 124 (2012) issue 1. - page 9-18
doi:10.1002/app.34910 ...

Bykov, Yana; Wagner, Sebastian; Walter, Olaf; Döring, Manfred; Fischer, Oliver; Pospiech, Doris; Köppl, Thomas; Altstädt, Volker
Synthesis of new dibenzo[c.e][1,2]oxaphosphorine 2‐oxide containing diols based on diethanolami ...
in Heteroatom Chemistry volume 23 (2012) issue 2. - page 146-153
doi:10.1002/hc.20763 ...

Altstädt, Volker; Spörrer, Andreas N. J.; Mühlbacher, Mathias; Michel, Peter; Seidel, Sonja
Ultralitec-Verfahren : Großserientauglicher Hochleistungsleichtbau
in Kunststoffe volume 102 (2012) issue 5. - page 53-58

Handge, Ulrich A.; Altstädt, Volker
Viscoelastic properties of solutions of polystyrene melts and carbon dioxide : Analysis of a tr ...
in Journal of Rheology volume 56 (2012) issue 4. - page 743-766
doi:10.1122/1.4708601 ...

2011

Altstädt, Volker; Kempf, M.; Schwägele, S.; Ferencz, A.
Compression fatigue after impact testing of thermosetting composites
2011
International Conference on Chemical Engineering (ICCE'11) / World Congress of Engineering and Computer Science 2011, San Francisco, USA

Kempf, M.; Schwägele, S.; Ferencz, A.; Altstädt, Volker
Effect of impact damage on the compression fatigue performance of glass and carbon fibre reinfo ...
2011
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&so ...
ICCM18: The 18th International Conference on Composite Materials, Jeju Island, Korea

Kothmann, Martin H.; Krämer, J.; Wolff-Fabris, Felipe; Altstädt, Volker; Kühner, U.; von Lossow, C.; Gröppel, Peter
Mechanical and thermal properties of nanoparticle modified epoxy resin after thermal ageing
2011
9th Eurofillers International Conference, Dresden, Deutschland

Njuhovic, E.; Witt, A.; Kempf, M.; Glöde, Stefan; Altstädt, Volker
Metallization of fiber-reinforced epoxy composites : Effect of surface structure on the peel st ...
2011
https://pdfs.semanticscholar.org/bebf/53be82fdc009 ...
ICCM18: The 18th International Conference on Composite Materials, Jeju Island, Korea

Altstädt, Volker; Götz, C.; Wolff-Fabris, Felipe
Fatigue behavior of polymer nanocomposites
2011
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&so ...
ICCM18: The 18th International Conference on Composite Materials, Jeju Island, Korea

Perret, Birgit; Schartel, Bernhard; Stöß, Kai; Diederichs, Jan; Ciesielski, Michael; Döring, Manfred; Krämer, Johannes; Altstädt, Volker
Decomposition Mechanisms and Fire Behavior
21st Annual Conference on Recent Advances in Flame Retardancy of Polymeric Materials 2010
Red Hook, NY : Curran, 2011. - page 128-139

Keilholz, Clemens; Apeldorn, Thomas; Wolff-Fabris, Felipe; Altstädt, Volker
Development of foamed thermoplastic substrate materials for printed circuit boards
Blowing agents and foaming processes 2011 : [13th international conference] ; Düsseldorf, Germany, 10 - 11 May 2011
Shawbury : Smithers RAPRA, 2011

Wolff-Fabris, Felipe; Altstädt, Volker; Arnold, Ulrich; Döring, Manfred
Electron beam curing of composites
München : Hanser, 2011. - VI, 129 page
doi:10.3139/9783446433465 ...

Krämer, Johannes; Apeldorn, Thomas; Altstädt, Volker
HF-Leiterplatten mit erhöhten Gebrauchstemperaturen auf Basis thermoplastischer Substratmateria ...
in PLUS : Produktion von Leiterplatten und Systemen volume 13 (2011) issue 9. - page 2082-2085

Apeldorn, Thomas; Wolff-Fabris, Felipe; Altstädt, Volker
High‐performance substrate based on a highly filled thermoplastic polymer
in Circuit World volume 37 (2011) issue 1

Apeldorn, Thomas; Keilholz, Clemens; Altstädt, Volker
Hybrid Multilayers : Economic Multilayers
in Kunststoffe international volume 101 (2011) issue 6. - page 46-50

Apeldorn, Thomas; Keilholz, Clemens; Altstädt, Volker
Hybride Multilayer : Wirtschaftlich trotz mehr Lagen
in Kunststoffe volume 101 (2011) issue 6. - page 78-83

Zeiler, Rico; Handge, Ulrich A.; Dijkstra, D. J.; Meyer, H.; Altstädt, Volker
Influence of molar mass and temperature on the dynamics of network formation in polycarbonate/c ...
in Polymer volume 52 (2011) issue 2. - page 430-442
doi:10.1016/j.polymer.2010.11.037 ...

Rohde, Melanie; Ebel, A.; Wolff-Fabris, Felipe; Altstädt, Volker
Influence of Processing Parameters on the Fiber Length and Impact Properties of Injection Molde ...
in International Polymer Processing volume 26 (2011) issue 3. - page 292-303
doi:10.3139/217.2442 ...

Stumpf, Marieluise; Spörrer, Andreas N. J.; Schmidt, Hans-Werner; Altstädt, Volker
Influence of supramolecular aditives on foam morphology injection-molded i-PP
in Journal of Cellular Plastics volume 47 (2011) issue 6. - page 519-534
doi:10.1177/0021955X11408769 ...

Perret, Birgit; Schartel, Bernhard; Stöß, Kai; Ciesielski, Michael; Diederichs, Jan; Döring, Manfred; Krämer, Johannes; Altstädt, Volker
A New Halogen‐Free Flame Retardant Based on 9,10‐Dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide ...
in Macromolecular Materials and Engineering volume 296 (2011) issue 1. - page 14-30
doi:10.1002/mame.201000242 ...

Perret, B.; Schartel, Bernhard; Stöß, Kai; Ciesielski, Michael; Diederichs, J.; Döring, M.; Krämer, J.; Altstädt, Volker
Novel DOPO-based flame retardants in high-performance carbon fibre epoxy composites for aviatio ...
in European Polymer Journal volume 47 (2011) issue 5. - page 1081-1089
doi:10.1016/j.eurpolymj.2011.02.008 ...

Handge, Ulrich A.; Zeiler, Rico; Dijkstra, Dirk J.; Meyer, Helmut; Altstädt, Volker
On the determination of elastic properties of composites of polycarbonate and multi-wall carbon ...
in Rheologica Acta volume 50 (2011) . - page 503-518
doi:10.1007/s00397-011-0558-x ...

Altstädt, Volker
Prüfung von Verbundwerkstoffen
Kunststoffprüfung. 2. Auflage
München : Hanser, 2011. - page 537-590

Escócio, Viviane A.; Visconte, Leila L. Y.; de Carvalho, Mariana B. M.; Nunes, Regina C. R.; Altstädt, Volker
Thermal and dynamic mechanical characterization of TPU/mica composites prepared by torque rheom ...
in Polímeros : Ciência e Tecnologia volume 21 (2011) issue 3. - page 240-245
doi:10.1590/S0104-14282011005000033 ...

Pozdnyakov, A. O.; Handge, Ulrich A.; Konchits, A.; Altstädt, Volker
Thermal decomposition study of poly(methyl methacrylate)/carbon nanofiller composites
in Polymers for Advanced Technologies volume 22 (2011) issue 1. - page 84-89
doi:10.1002/pat.1849 ...
10th International Symposium on Polymers for Advanced Technologies : PAT 2009, Jerusalem, Israel

Altstädt, Volker; Mantey, Axel
Thermoplast-Schaumspritzgießen
München : Hanser, 2011. - X, 233 page
doi:10.3139/9783446425743 ...

Fischer, Frank; Beier, Uwe; Wolff-Fabris, Felipe; Altstädt, Volker
Toughened high performance epoxy resin system for aerospace applications
in Science and Engineering of Composite Materials volume 18 (2011) issue 4. - page 209-215
doi:10.1515/SECM.2011.042 ...

Renner, M.; Altstädt, Volker; Döring, M.; Merz, T.; Räckers, B.
Toughness improvement of novel Catalytic curing epoxy resins
New material characteristics to cover new applications needs : SEICO 11
Riehen : SAMPE Europe Conference Management, 2011

Escócio, Viviane A.; Altstädt, Volker; Visconte, Leila; de Carvalho, Mariana; Nunes, Regina
TPU/Mica Composites Prepared in Torque Rheometer : Processability, Mechanical Properties and Mo ...
in Chemistry & Chemical Technology volume 5 (2011) issue 2. - page 191-195
doi:10.23939/chcht05.02.191 ...

2010

Erhard, Dominik P.; Giesa, Reiner; Altstädt, Volker; Schmidt, Hans-Werner
Charge Storage Performance of Polyetherimide Ultem®1000 : Influence of Secondary Antioxidants a ...
in Journal of Applied Polymer Science volume 115 (2010) issue 2. - page 1247-1255
doi:10.1002/app.30823 ...

Handge, Ulrich A.; Hedicke-Höchstötter, Katrin; Altstädt, Volker
Composites of polyamide 6 and silicate nanotubes of the mineral halloysite : Influence of molec ...
in Polymer volume 51 (2010) issue 12. - page 2690-2699
doi:10.1016/j.polymer.2010.04.041 ...

Wolff-Fabris, Felipe; Altstädt, Volker
Electron beam curing of epoxy composites
Epoxy polymers : new materials and innovations
Weinheim : Wiley-VCH, 2010. - page 253-269
doi:10.1002/9783527628704.ch13 ...

Schweikart, Alexandra; Zimin, Denys; Handge, Ulrich A.; Bennemann, Michael; Altstädt, Volker; Fery, Andreas; Koch, Kerstin
Fabrication of Artificial Petal Sculptures by Replication of Sub-micron Surface Wrinkles
in Macromolecular Chemistry and Physics volume 211 (2010) issue 2. - page 259-264
doi:10.1002/macp.200900543 ...

Gutmann, Peter; Hildebrandt, Klaus; Altstädt, Volker; Müller, Axel H. E.
Foaming of an Immiscible Blend System Using Organic Liquids as Blowing Agents
in Journal of Cellular Plastics volume 46 (2010) issue 3. - page 239-258
doi:10.1177/0021955X09352138 ...

Ruckdäschel, Holger; Gutmann, Peter; Altstädt, Volker; Schmalz, Holger; Müller, Axel H. E.
Foaming of Microstructured and Nanostructured Polymer Blends
Müller, Axel H. E. ; Schmidt, Hans-Werner (Hrsg.): Complex Macromolecular Systems I
Berlin : Springer, 2010. - page 199-252 . - (Advances in Polymer Science; 227)
doi:10.1007/12_2009_32 ...

Lau, Yiu‐Ting Richard; Weng, Lu‐Tao; Ng, Kai‐Mo; Kempf, Manuel; Altstädt, Volker; Schultz, Jerold M.; Chan, Chi‐Ming
Induction of Molecular Organization of Oligomers by Low‐Energy Electrons
in Macromolecular Rapid Communications volume 31 (2010) issue 7. - page 634-639
doi:10.1002/marc.200900730 ...

Erhard, Dominik P.; Lovera, Deliani; Giesa, Reiner; Altstädt, Volker; Schmidt, Hans-Werner
Influence of Physical Aging on the Performance of Corona-charged Amorphous Polymer Electrets
in Journal of Polymer Science Part B: Polymer Physics volume 48 (2010) issue 9. - page 990-997
doi:10.1002/polb.21987 ...

Hausherr, Jan-Marcel; Fischer, Frank; Altstädt, Volker; Krenkel, Walter
Non-destructive Characterization of High Performance C/SiC-Ceramics Using X-Ray-Computed Tomogr ...
in International Journal of Applied Ceramic Technology volume 7 (2010) issue 3. - page 361-368
doi:10.1111/j.1744-7402.2009.02449.x ...

Erhard, Dominik P.; Lovera, Deliani; von Salis-Soglio, Cosima; Giesa, Reiner; Altstädt, Volker; Schmidt, Hans-Werner
Recent Advances in the Improvement of Polymer Electret Films
Müller, Axel H. E. (Hrsg.): Complex macromolecular systems, Vol. II
Berlin : Springer, 2010. - page 155-207 . - (Advances in Polymer Science; 228)
doi:10.1007/12_2009_45 ...

Zimin, Denys; Schmidt, Kristin; Lim, Goy Teck; Ranft, Meik; Terrenoire, Alexandre; Korb, Hardy; Sandler, Jan K. W.; Fery, Andreas; Altstädt, Volker; Krausch, Georg
Relating Haptic Perception of Polymer Surfaces to their Objective Properties
in Zeitschrift Kunststofftechnik = Journal of Plastics Technology volume 6 (2010) issue 1. - page 50-64

Handge, Ulrich A.; Altstädt, Volker; Hedicke-Höchstötter, Katrin; Pospiech, Doris; Jehnichen, Dieter; Kretzschmar, Bernd
Surface Functionalization of Halloysite Nanotubes for Polyamide 6 Composites
in Zeitschrift Kunststofftechnik = Journal of Plastics Technology volume 6 (2010) issue 6. - page 316-337
http://www.kunststoffe.de/en/_storage/asset/548378 ...

Erhard, Dominik P.; Lovera, Deliani; Jenninger, Werner; Wagner, Joachim; Altstädt, Volker; Schmidt, Hans-Werner
Tailored Additives to Improve the Electret Performance of Polycarbonates
in Macromolecular Chemistry and Physics volume 211 (2010) issue 20. - page 2179-2186
doi:10.1002/macp.201000171 ...

Möller, Michael W.; Handge, Ulrich A.; Kunz, Daniel A.; Lunkenbein, Thomas; Altstädt, Volker; Breu, Josef
Tailoring shear-stiff, mica-like nanoplatelets
in ACS Nano volume 4 (2010) issue 2. - page 717-724
doi:10.1021/nn9011829 ...

Pozdnyakov, A. O.; Handge, Ulrich A.; Konchits, A. A.; Altstädt, Volker
Thermal stability of PMMA-fullerene C₆₀ nanocomposite : A spectroscopic study
in Technical Physics Letters volume 36 (2010) issue 10. - page 960-963
doi:10.1134/S1063785010100251 ...

2009

Gutmann, Peter; Hildebrandt, K.; Altstädt, Volker; Müller, Axel H. E.
Organic liquids as blowing agents to foam an immiscible blend system
2009
PPS-25 : 25th annual meeting of the Polymer Processing Society, Goa, Indien

Spörrer, Andreas N. J.; Bangarusampath, D. S.; Richter, F.; Ruckdäschel, Holger; Altstädt, Volker
Structural foam moulding of styrene-acrylonitrile/polycarbonate blends : Morphological aspects ...
2009
PPS-25 : 25th annual meeting of the Polymer Processing Society, Goa, Indien

Lovera, Deliani; Bilbao, Cristina; Schreier, Philipp; Kador, Lothar; Schmidt, Hans-Werner; Altstädt, Volker
Charge Storage of Electrospun Fiber Mats of Poly(phenylene ether)/Polystyrene Blends
in Polymer Engineering & Science volume 49 (2009) issue 12. - page 2430-2439
doi:10.1002/pen.21493 ...

Lovera, Deliani; Ruckdäschel, Holger; Altstädt, Volker; Schmidt, Hans-Werner
Charge storage of ternary polymer blends based on poly(phenylene ether)
in Polymer International volume 58 (2009) issue 11. - page 1260-1266
doi:10.1002/pi.2653 ...

Allakhverdiev, Kerim R.; Lovera, Deliani; Altstädt, Volker; Schreier, Philipp; Kador, Lothar
Confocal Raman Microscopy : Non-Destructive Materials Analysis with Micrometer Resolution
in Reviews on Advanced Materials Science volume 20 (2009) issue 1. - page 77-84
http://www.ipme.ru/e-journals/RAMS/no_12009/lopati ...

Beier, Uwe; Sandler, Jan K. W.; Altstädt, Volker; Hülder, Gerrit; Schmachtenberg, Ernst; Spanner, Hermann; Weimer, Christian; Roser, Tim; Buchs, Wolfgang; Hassler, Ulf
Cost-efficient Preforming Process for Complex High-Performance Fibre-reinforced Composites
in Zeitschrift Kunststofftechnik = Journal of Plastics Technology volume 5 (2009) issue 4. - page 278-298

Puskas, Judit E.; El Fray, Miroslawa; Tomkins, Matthew; Dos Santos, Lucas M.; Fischer, Frank; Altstädt, Volker
Dynamic stress relaxation of thermoplastic elastomeric biomaterials
in Polymer volume 50 (2009) issue 1. - page 245-249
doi:10.1016/j.polymer.2008.10.030 ...

Hillenbrand, Joachim; Motz, Tilman; Sessler, Gerhard M.; Zhang, Xiaoqin; Behrendt, Nico; von Salis-Soglio, Cosima; Erhard, Dominik P.; Altstädt, Volker; Schmidt, Hans-Werner
The effect of additives on charge decay in electron-beam charged polypropylene films
in Journal of Physics D volume 42 (2009) issue 6
doi:10.1088/0022-3727/42/6/065410 ...

Puskas, Judit E.; Dos Santos, Lucas M.; Fischer, Frank; Götz, Christian; El Fray, Miroslawa; Altstädt, Volker; Tomkins, Matthew
Fatigue testing of implantable specimens : Effect of sample size and branching on the dynamic f ...
in Polymer volume 50 (2009) issue 2. - page 591-597
doi:10.1016/j.polymer.2008.10.061 ...

Gutmann, Peter; Hildebrandt, Klaus; Altstädt, Volker; Müller, Axel H. E.
Foaming of an Immiscible Blend System Using Organic Liquids as Blowing Agents
Blowing agents and foaming processes 2009 : 11th international conference
Shawbury : Smithers Rapra, 2009

Hedicke-Höchstötter, Katrin; Altstädt, Volker
Halloysite Nanocomposites : Natural Occuring Silicate Nanotubes as Reinforcement in Polyamide 6
in Zeitschrift Kunststofftechnik = Journal of Plastics Technology volume 5 (2009) issue 1. - page 71-86

Kurz, H.; Täger, O.; Ferkel, H.; Altstädt, Volker; Apeldorn, Thomas
Herstellung von nanomodifizierten Thermoplastfolien

2009

Rohde, Melanie; Fischer, Frank; Altstädt, Volker; Herrmann, Christian; Hausherr, Jan-Marcel; Krenkel, Walter
IMC-Spritzgießcompounder - Potentiale der Langfaserverstärkung
Verbundwerkstoffe
publ: Krenkel, Walter
Weinheim : WILEY-VCH, 2009. - page 482-488
doi:10.1002/9783527627110.ch68 ...

Götz, Christian; Handge, Ulrich A.; Piątek-Hnat, Marta; El Fray, Miroslawa; Altstädt, Volker
Influence of E-Beam Irradiation on Poly(aliphatic/aromatic-ester) Multiblock Copolymers Used as ...
in Kautschuk, Gummi, Kunststoffe volume 62 (2009) issue 7-8. - page 396-398

Götz, Christian; Handge, Ulrich A.; Piatek, Marta; El Fray, Miroslawa; Altstädt, Volker
Influence of e-beam irradiation on the dynamic creep and fatigue properties of poly(aliphatic/a ...
in Polymer volume 50 (2009) issue 23. - page 5499-5507
doi:10.1016/j.polymer.2009.09.051 ...

Gutmann, Peter; Bangarusampath, D. S.; Altstädt, Volker; Ruckdäschel, Holger; Schmalz, Holger; Müller, Axel H. E.
Influence of the microstructure on the foaming behavior of an immiscible blend
67th Annual Technical Conference of the Society of Plastics Engineers 2009
Brookfield, Conn. : The Society, 2009

Beier, Uwe; Sandler, Jan K. W.; Altstädt, Volker; Spanner, Hermann; Weimer, Christian
Mechanical performance of carbon fibre-reinforced composites based on stitched and bindered pre ...
in Composites Part A: Applied Science and Manufacturing volume 40 (2009) issue 11. - page 1756-1763
doi:10.1016/j.compositesa.2009.08.012 ...

Verdejo, Raquel; Werner, Philipp; Sandler, Jan K. W.; Altstädt, Volker; Shaffer, Milo S. P.
Morphology and properties of injection-moulded carbon-nanofibre poly(etheretherketone) foams
in Journal of Materials Science volume 44 (2009) issue 6. - page 1427-1434
doi:10.1007/s10853-008-3168-y ...

Hedicke-Höchstötter, Katrin; Lim, Goy Teck; Altstädt, Volker
Novel polyamide nanocomposites based on silicate nanotubes of the mineral halloysite
in Composites Science and Technology volume 69 (2009) issue 3-4. - page 330-334
doi:10.1016/j.compscitech.2008.10.011 ...

Lim, Goy Teck; Foreman-Orlowski, Elizabeth A.; Porosky, Sara E.; Pavka, Paul; Puskas, Judit E.; Götz, Christian; Altstädt, Volker
Novel Polyisobutylene-Based Biocompatible TPE Nanocomposites
in Rubber Chemistry and Technology volume 82 (2009) issue 4. - page 461-472
doi:10.5254/1.3548258 ...

Fischer, Frank; Lim, Goy Teck; Handge, Ulrich A.; Altstädt, Volker
Numerical Simulation of Mechanical Properties of Cellular Materials Using Computed Tomography A ...
in Journal of Cellular Plastics volume 45 (2009) issue 5. - page 441-460
doi:10.1177/0021955X09339340 ...

Gutmann, Peter; Greiner, C.; Ruckdäschel, Holger; Bangarusampath, D. S.; Altstädt, Volker
Polystyrol-Acrylnitril Nanokomposite Schäume
Verbundwerkstoffe : 17. Symposium Verbundwerkstoffe und Werkstoffverbunde
Weinheim : Wily-VCH, 2009. - page 174-180
doi:10.1002/9783527627110.ch24 ...

Bangarusampath, D. S.; Ruckdäschel, Holger; Altstädt, Volker; Sandler, Jan K. W.; Garray, Didier; Shaffer, Milo S. P.
Rheological and electrical percolation in melt-processed poly(ether ether ketone)/multi-wall ca ...
in Chemical Physics Letters volume 482 (2009) issue 1-3. - page 105-109
doi:10.1016/j.cplett.2009.09.064 ...

Bangarusampath, D. S.; Ruckdäschel, Holger; Altstädt, Volker; Sandler, Jan K. W.; Garray, Didier; Shaffer, Milo S. P.
Rheology and properties of melt-processed poly(ether ether ketone)/multi-wall carbon nanotube c ...
in Polymer volume 50 (2009) issue 24. - page 5803-5811
doi:10.1016/j.polymer.2009.09.061 ...

Apeldorn, Thomas; Altstädt, Volker; Glöde, Stefan
Thermoplastik als Leiterplatten-Basismaterial
in elektroniknet.de
. 2009
https://www.elektroniknet.de/elektronikfertigung/t ...

Lim, Goy Teck; Altstädt, Volker; Ramsteiner, Falko
Understanding the Compressive Behavior of Linear and Cross-linked Poly(vinyl chloride) Foams
in Journal of Cellular Plastics volume 45 (2009) issue 5. - page 419-439
doi:10.1177/0021955X09105372 ...

2008

Spörrer, Andreas N. J.; Bangarusampath, D. S.; Altstädt, Volker
Foam injection molding of very-low density and thin-walled parts for lightweight design
2008
FOAMS 2008 TopCon, Charlotte, NC, USA

Gutmann, Peter; Ruckdäschel, Holger; Bangarusampath, D. S.; Altstädt, Volker; Schmalz, Holger; Müller, Axel H. E.
Batch-foaming of multiphase blend systems varying the viscosity ratio
2008
24th PPS International Meeting, Salerno, Italia

Ruckdäschel, Holger; Gutmann, Peter; Greiner, C.; Müller, Axel H. E.; Altstädt, Volker
Novel cellular materials by foaming nanostructured blends and nano-reinforced polymers
2008
24th PPS International Meeting, Salerno, Italia

Spörrer, Andreas N. J.; Altstädt, Volker
Structural foams having moderate thickness and ultra-low density prepared by a new injection mo ...
2008
24th PPS International Meeting, Salerno, Italia

Spörrer, Andreas N. J.; Bangarusampath, D. S.; Altstädt, Volker
The Challenge of Foam Injection-Moulding : Possibilities to Improve Surface Appearance, Foam Mo ...
in Cellular Polymers volume 27 (2008) issue 2. - page 101-121
doi:10.1177/026248930802700203 ...

Motz, Tilman; Hillenbrand, J.; Zhang, X.; Behrendt, N.; von Salis-Soglio, Cosima; Erhard, Dominik P.; Altstädt, Volker; Schmidt, Hans-Werner; Sessler, Gerhard M.
Charge decay of electron-beam irradiated Polypropylene films containing additives
13th International Symposium on Electrets : Proceedings
Piscataway, NJ : IEEE, 2008
doi:10.1109/ISE.2008.4814016 ...

Lovera, Deliani; Altstädt, Volker; Schmidt, Hans-Werner
Charge storage of compact and fibrous blends based on polyphenylene ether
13th International Symposium on Electrets : Proceedings
Piscataway, NJ : IEEE, 2008
doi:10.1109/ISE.2008.4814015 ...

Göldel, Andreas; Ruckdäschel, Holger; Müller, Axel H. E.; Pötschke, Petra; Altstädt, Volker
Controlling the phase morphology of immiscible poly(2,6-dimethyl-1,4-phenylene ether)/poly(styr ...
in e-Polymers volume 8 (2008) issue 1
doi:10.1515/epoly.2008.8.1.1741 ...

Ruckdäschel, Holger; Rausch, Julius; Sandler, Jan K. W.; Altstädt, Volker; Schmalz, Holger; Müller, Axel H. E.
Correlation of the melt rheological properties with the foaming behavior of immiscible blends o ...
in Polymer Engineering & Science volume 48 (2008) issue 11. - page 2111-2125
doi:10.1002/pen.21100 ...

Ruckdäschel, Holger; Bangarusampath, D. S.; Greiner, C.; Gutmann, Peter; Gebhardt, Matthias; Türke, C.; Spörrer, Andreas N. J.; Fischer, F.; Altstädt, Volker; Müller, Axel H. E.
Development of novel cellular materials via foaming of nanoreinforced polymers and multiphase b ...
Blowing agents and foaming processes 2008
Shawbury : Smithers Rapra, 2008

Bangarusampath, D. S.; Altstädt, Volker; Ruckdäschel, Holger; Sandler, Jan K. W.; Shaffer, Milo S. P.
Dispergierung von carbon nanotubes in poly(ether ether keton) und deren Effekte auf die rheolog ...
in Kunststoffe volume 4 (2008) issue 6

Bangarusampath, D. S.; Altstädt, Volker; Ruckdäschel, Holger; Sandler, Jan K. W.; Shaffer, Milo S. P.
Dispersion of carbon nanotubes in poly(ether ether ketone) and its effects on rheological and e ...
in Zeitschrift Kunststofftechnik = Journal of Plastics Technology volume 4 (2008) issue 6

Götz, C.; Fischer, F.; El Fray, Miroslawa; Piatek, M.; Lim, G. T.; Altstädt, Volker
Dynamic creep and fatigue performance of thermoplastic elastomers as biomaterials
PPS-24 : the Polymer Processing Society 24th Annual Meeting
Melville, NY : Polymer Processing Society, 2008

Altstädt, Volker; Lovera, Deliani; Schmidt, Hans-Werner; Schmidt, Stephan; Fery, Andreas
Electrospun Polymeric Fine Fibres : Characterisation of their Morphology and Properties
in Imaging & Microscopy volume 10 (2008) issue 2. - page 29-31

Beier, Uwe; Fischer, Frank; Sandler, Jan K. W.; Altstädt, Volker; Weimer, Christian; Spanner, Hermann; Buchs, Wolfgang
Evaluation of preforms stitched with a low melting-temperature thermoplastic yarn in carbon fib ...
in Composites Part A: Applied Science and Manufacturing volume 39 (2008) issue 5. - page 705-711
doi:10.1016/j.compositesa.2008.02.011 ...

Ruckdäschel, Holger; Fischer, Frank; Altstädt, Volker; Müller, Axel H. E.
Fatigue Crack Growth Behavior of Multiphase Blends
in Journal of Solid Mechanics and Materials Engineering volume 2 (2008) issue 4. - page 417-427
doi:10.1299/jmmp.2.417 ...

Lovera, Deliani; Altstädt, Volker; Schmidt, Hans-Werner
Influence of the polymer chemical structure on the charge storage of polymer blends
13th International Symposium on Electrets : Proceedings
Piscataway, NJ : IEEE, 2008
doi:10.1109/ISE.2008.4814085 ...

Beier, Uwe; Wolff-Fabris, Felipe; Fischer, Frank; Sandler, Jan K. W.; Altstädt, Volker; Hülder, Gerrit; Schmachtenberg, Ernst; Spanner, Hermann; Weimer, Christian; Roser, Tim; Buchs, Wolfgang
Mechanical performance of carbon fibre-reinforced composites based on preforms stitched with in ...
in Composites Part A: Applied Science and Manufacturing volume 39 (2008) issue 9. - page 1572-1581
doi:10.1016/j.compositesa.2008.06.003 ...

Behrendt, N.; Altstädt, Volker; Zhang, X.; Sessler, Gerhard M.; Schmidt, Hans-Werner
New techniques for the development of cellular films for electret and piezoelectric application ...
13th International Symposium on Electrets : Proceedings
Piscataway, NJ : IEEE, 2008
doi:10.1109/ISE.2008.4813990 ...

Beier, Uwe; Sandler, Jan K. W.; Altstädt, Volker; Spanner, Hermann; Weimer, Christian; Roser, Tim; Buchs, Wolfgang
New yarn materials for high-performance fibre-reinforced composites made of stitched preforms
in Zeitschrift Kunststofftechnik = Journal of Plastics Technology volume 4 (2008) issue 5

Artner, Johannes; Ciesielski, Michael; Walter, Olaf; Döring, Manfred; Perez, Raul M.; Sandler, Jan K. W.; Altstädt, Volker; Schartel, Bernhard
A Novel DOPO‐Based Diamine as Hardener and Flame Retardant for Epoxy Resin Systems
in Macromolecular Materials and Engineering volume 293 (2008) issue 6. - page 503-514
doi:10.1002/mame.200700287 ...

Lim, Goy Teck; Foreman-Orlowski, Elizabeth; Pavka, Paul; Götz, Christian; Altstädt, Volker; Puskas, Judit E.
Novel High Temperature Styrenic TPE Nanocomposites
174th technical meeting of the Rubber Division, American Chemical Society 2008
Red Hook, NY : Curran, 2008

Ruckdäschel, Holger; Sandler, Jan K. W.; Altstädt, Volker
On the Friction and Wear of Carbon Nanofiber-Reinforced PEEK-Based Polymer Composites
Tribology of Polymeric Nanocomposites : friction and wear of bulk materials and coatings
Amsterdam : Elsevier, 2008. - page 149-208
doi:10.1016/S1572-3364(08)55008-7 ...

Erichsen, J.; Nagel, C.; Günther‐Schade, K.; Renner, M.; Altstädt, Volker; Faupel, F.
Positron annihilation lifetime measurements of mechanically fatigued polystyrene samples
in Journal of Polymer Science Part B: Polymer Physics volume 46 (2008) issue 18. - page 1991-1995
doi:10.1002/polb.21536 ...

Hoffmann, Thorsten; Pospiech, Doris; Häußler, Liane; Pötschke, Petra; Reuter, Uta; Werner, Philipp; Sandler, Jan K. W.; Döring, Manfred; Altstädt, Volker
Properties of Segmented Block Copolymers in PEEK/PSU Blends
in High Performance Polymers volume 20 (2008) issue 6. - page 601-614
doi:10.1177/0954008307082176 ...

Schartel, Bernhard; Braun, Ulrike; Balabanovich, Aliaksandr I.; Artner, Johannes; Ciesielski, Michael; Döring, Manfred; Perez, Raul M.; Sandler, Jan K. W.; Altstädt, Volker
Pyrolysis and fire behaviour of epoxy systems containing a novel 9,10-dihydro-9-oxa-10-phosphap ...
in European Polymer Journal volume 44 (2008) issue 3. - page 704-715
doi:10.1016/j.eurpolymj.2008.01.017 ...

Barriau, Emilie; Schmidt-Freytag, Ulrike; Roth, Marcel; Gehring, Joachim; Simon, Norbert; Wolff-Fabris, Felipe; Altstädt, Volker; Döring, Manfred; Arnold, Ulrich
Silver Olefin Complexes : Highly Efficient Initiators for the Electron Beam Curing of Epoxy Res ...
in Macromolecules volume 41 (2008) issue 11. - page 3779-3781
doi:10.1021/ma800309r ...

Erhard, Dominik P.; Giesa, Reiner; Altstädt, Volker; Schmidt, Hans-Werner
Synthesis and characterization of fluorinated poly(ether imide)s and their application as elect ...
13th International Symposium on Electrets : Proceedings
Piscataway, NJ : IEEE, 2008
doi:10.1109/ISE.2008.4814082 ...

Gunkel, F.; Spörrer, Andreas N. J.; Lim, G. T.; Bangarusampath, D. S.; Altstädt, Volker
Understanding Melt Rheology and Foamability of Polypropylene-based TPO Blends
in Journal of Cellular Plastics volume 44 (2008) issue 4. - page 307-325
doi:10.1177/0021955X08088858 ...

Kurz, H.; Täger, O.; Ferkel, H.; Hufenbach, W.; Lepper, M.; Altstädt, Volker; Apeldorn, Thomas
Verarbeitung von Faser-Thermoplast-Schichtverbunden

2008

2007

Botelho, Kilça T.; Sanches, Alaor A. F.; Diaz, Francisco R.V.; Fabris, Felipe W.; Altstädt, Volker
Toughness enhancement of the RTM6 System employing engineering thermoplastics and block-copolym ...
2007
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&so ...
9º Congresso Brasileiro de Polímeros, Campina Grande, Paraíba, Brasilien

Ruckdäschel, Holger; Altstädt, Volker; Müller, Volker H. E.
Tailoring of Cellular Polymers by Blending
2007
PPS 23 : The Polymer Processing Society 23th Annual Meeting, Salvador, Brazil

Mohmeyer, Nils; Behrendt, Nico; Zhang, Xiaoqin; Smith, Paul; Altstädt, Volker; Sessler, Gerhard M.; Schmidt, Hans-Werner
Additives to improve the electret properties of isotactic polypropylene
in Polymer volume 48 (2007) issue 6. - page 1612-1619
doi:10.1016/j.polymer.2006.08.001 ...

Puskas, Judit E.; Kwon, Yongmoon; Altstädt, Volker; Kontopoulou, Marianna
Blends of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) with polystyrene-based thermoplastic rub ...
in Polymer volume 48 (2007) issue 2. - page 590-597
doi:10.1016/j.polymer.2006.11.045 ...

Santos, Marlon S.; Dias, Marcos L.; Altstädt, Volker
Blends of Poly(ether imide) and Styrene Sulfonic Acid Based Polymer : Thermal, Mechanical and I ...
in International Journal of Polymeric Materials and Polymeric Biomaterials volume 56 (2007) issue 5. - page 521-534
doi:10.1080/00914030600972758 ...

Galetz, Mathias; Blaß, T.; Ruckdäschel, Holger; Sandler, Jan K. W.; Altstädt, Volker; Glatzel, Uwe
Carbon nanofibre-reinforced ultrahigh molecular weight polyethylene for tribological applicatio ...
in Journal of Applied Polymer Science volume 104 (2007) issue 6. - page 4173-4181
doi:10.1002/app.26058 ...

Spörrer, Andreas N. J.; Altstädt, Volker
Controlling Morphology of Injection Molded Structural Foams by Mold Design and Processing Param ...
in Journal of Cellular Plastics volume 43 (2007) issue 4-5. - page 313-330
doi:10.1177/0021955X07079043 ...

Ruckdäschel, Holger; Gutmann, Peter; Altstädt, Volker; Schmalz, Holger; Müller, Axel H. E.
Development of Micro- and Nanocellular Polymers
in MRS Online Proceedings Library volume 1056 (2007)
doi:10.1557/PROC-1056-HH11-75 ...

Frese, Thomas; Lovera, Deliani; Sandler, Jan K. W.; Lim, Goy Teck; Altstädt, Volker; Giesa, Reiner; Schmidt, Hans-Werner
Electret Properties of Polyetherimides : Influence of Water Content and Comparison with other H ...
in Macromolecular Materials and Engineering volume 292 (2007) issue 5. - page 582-587
doi:10.1002/mame.200600463 ...

Lovera, Deliani; Bilbao, Cristina; Altstädt, Volker; Schmidt, Hans-Werner; Giesa, Reiner
Electrospun Nanofibers of High Performance Electret Polymers
in Microscopy and Microanalysis volume 13 (2007) issue S03. - page 444-445
doi:10.1017/S1431927607082220 ...

Hedicke-Höchstötter, Katrin; Demchuk, Vitaliy; Langenfelder, Dieter; Altstädt, Volker
Ermüdungsrissausbreitungsverhalten von Polyamid-6 Nanocomposites auf der Basis von Schichtsilik ...
in Zeitschrift Kunststofftechnik = Journal of Plastics Technology volume 3 (2007) issue 2

Perez, R.; Sandler, Jan K. W.; Altstädt, Volker; Hoffmann, T.; Pospiech, D.; Artner, Johannes; Ciesielski, Michael; Döring, M.; Braun, U.; Schartel, Bernhard
Flame Retardant Epoxy Resin System for Liquid Composite Moulding Applications
Advances in the flame retardancy of polymeric materials : current perspectives presented at FRPM'05
Norderstedt : Books on Demand, 2007. - page 69-84

Ruckdäschel, Holger; Altstädt, Volker; Müller, Axel H. E.
Foaming of polymer blends : Chance and challenge
in Cellular Polymers volume 26 (2007) issue 6. - page 367-380
doi:10.1177/026248930702600602 ...

Lietz, Siljana; Yang, Jing-Lei; Bosch, Eva; Sandler, Jan K. W.; Zhang, Zhong; Altstädt, Volker
Improvement of the Mechanical Properties and Creep Resistance of SBS Block Copolymers by Nanocl ...
in Macromolecular Materials and Engineering volume 292 (2007) issue 1. - page 23-32
doi:10.1002/mame.200600280 ...

Altstädt, Volker; Sandler, Jan K. W.; Ruckdäschel, Holger
Influence of Nanoscale Morphology on the Micro- and Macromechanical Behaviour of Polymers and P ...
in Solid State Phenomena volume 121-123 (2007) . - page 1391-1394
doi:10.4028/www.scientific.net/SSP.121-123.1391 ...

Beier, Uwe; Fischer, Frank; Sandler, Jan K. W.; Altstädt, Volker; Weimer, Christian; Buchs, Wolfgang
Mechanical performance of carbon fibre-reinforced composites based on stitched preforms
in Composites Part A: Applied Science and Manufacturing volume 38 (2007) issue 7. - page 1655-1663
doi:10.1016/j.compositesa.2007.02.007 ...

Hoffmann, Thorsten; Pospiech, Doris; Kretzschmar, Bernd; Reuter, Uta; Häußler, Liane; Eckert, Franziska; Perez-Graterol, Raul; Sandler, Jan K. W.; Altstädt, Volker
Modification of Polysulfones by Carboxylic Acids
in High Performance Polymers volume 19 (2007) issue 1. - page 48-61
doi:10.1177/0954008306072345 ...

Artner, Johannes; Ciesielski, Michael; Ahlmann, Martin; Walter, Olaf; Döring, Manfred; Perez, Raul M.; Altstädt, Volker; Sandler, Jan K. W.; Schartel, Bernhard
A Novel and Effective Synthetic Approach to 9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-oxide ...
in Phosphorus, Sulfur, and Silicon and the Related Elements volume 182 (2007) issue 9. - page 2131-2148
doi:10.1080/10426500701407417 ...

Perez, R. M.; Sandler, Jan K. W.; Altstädt, Volker; Hoffmann, T.; Pospiech, D.; Ciesielski, Michael; Döring, M.; Braun, U.; Balabanovich, Aliaksandr I.; Schartel, Bernhard
Novel phosphorus-modified polysulfone as a combined flame retardant and toughness modifier for ...
in Polymer volume 48 (2007) issue 3. - page 778-790
doi:10.1016/j.polymer.2006.12.011 ...

Perez, R. M.; Sandler, Jan K. W.; Altstädt, Volker; Hoffmann, T.; Pospiech, D.; Artner, Johannes; Ciesielski, Michael; Döring, M.; Balabanovich, Aliaksandr I.; Knoll, U.; Braun, U.; Schartel, Bernhard
Novel phosphorus‐containing hardeners with tailored chemical structures for epoxy resins : Synt ...
in Journal of Applied Polymer Science volume 105 (2007) issue 5. - page 2744-2759
doi:10.1002/app.26537 ...

Schartel, Bernhard; Balabanovich, Aliaksandr I.; Braun, U.; Knoll, U.; Artner, Johannes; Ciesielski, Michael; Döring, M.; Perez, R.; Sandler, Jan K. W.; Altstädt, Volker; Hoffmann, T.; Pospiech, D.
Pyrolysis of epoxy resins and fire behavior of epoxy resin composites flame‐retarded with 9,10‐ ...
in Journal of Applied Polymer Science volume 104 (2007) issue 4. - page 2260-2269
doi:10.1002/app.25660 ...

Li, G.; Gunkel, F.; Wang, J.; Park, C. B.; Altstädt, Volker
Solubility measurements of N₂ and CO₂ in polypropylene and ethene/octene copolymer
in Journal of Applied Polymer Science volume 103 (2007) issue 5. - page 2945-2953
doi:10.1002/app.25163 ...

Erhard, Dominik P.; Giesa, Reiner; Altstädt, Volker; Schmidt, Hans-Werner
Synthesis and Structure-Property Relationships of Fluorinated Poly(ether imide)s as Electret Ma ...
in Macromolecular Chemistry and Physics volume 208 (2007) issue 14. - page 1522-1529
doi:10.1002/macp.200700111 ...

Lovera, Deliani; Ruckdäschel, Holger; Göldel, Andreas; Behrendt, Nico; Frese, Thomas; Sandler, Jan K. W.; Altstädt, Volker; Giesa, Reiner; Schmidt, Hans-Werner
Tailored Polymer Electrets Based on Poly(2,6 Dimethyl-1,4-Phenylene Ether) and its Blends with ...
in European Polymer Journal volume 43 (2007) issue 4. - page 1195-1201
doi:10.1016/j.eurpolymj.2006.12.032 ...

Ruckdäschel, Holger; Sandler, Jan K. W.; Altstädt, Volker; Schmalz, Holger; Abetz, Volker; Müller, Axel H. E.
Toughening of immiscible PPE/SAN blends by triblock terpolymers
in Polymer volume 48 (2007) issue 9. - page 2700-2719
doi:10.1016/j.polymer.2007.03.005 ...

2006

Hausherr, Jan-Marcel; Fischer, Frank; Krenkel, Walter; Altstädt, Volker
Material Characterisation of C/SiC : Comparison of Computed Tomography and Scanning Electron Mi ...
2006
https://www.ndt.net/article/cdcm2006/papers/haushe ...
CDCM 2006 - Conference on Damage in Composite Materials 2006, Stuttgart, Germany

Spörrer, Andreas N. J.; Sandler, Jan K. W.; Mantey, Axel; Altstädt, Volker
Tailored structural foams by foam injection-molding with a specialized mold
2006
FOAMS 2006, Chicago, Ill., USA

Sandler, Jan K. W.; Frese, T.; Altstädt, Volker
Aktuelle Forschung bei Polymerschäumen : Polymere Nanocomposite-Schäume
in PU-Magazin : Forum für die Polyurethanindustrie volume 6 (2006) issue 2. - page 68-74

El Fray, Miroslawa; Prowans, Piotr; Puskas, Judit E.; Altstädt, Volker
Biocompatibility and Fatigue Properties of Polystyrene−Polyisobutylene−Polystyrene, an Emerging ...
in Biomacromolecules volume 7 (2006) issue 3. - page 844-850
doi:10.1021/bm050971c ...

Behrendt, Nico; Mohmeyer, Nils; Hillenbrand, Joachim; Klaiber, Martin; Zhang, Xiaoqin; Sessler, Gerhard M.; Schmidt, Hans-Werner; Altstädt, Volker
Charge storage behavior of isotropic and biaxially-oriented polypropylene films containing alph ...
in Journal of Applied Polymer Science volume 99 (2006) issue 3. - page 650-658
doi:10.1002/app.22502 ...

Ruckdäschel, Holger; Sandler, Jan K. W.; Altstädt, Volker; Rettig, Cornelia; Schmalz, Holger; Abetz, Volker; Müller, Axel H. E.
Compatibilisation of PPE/SAN blends by triblock terpolymers : Correlation between block terpoly ...
in Polymer volume 47 (2006) issue 8. - page 2772-2790
doi:10.1016/j.polymer.2006.02.064 ...

Hedicke, Katrin; Wittich, Hans; Mehler, Christof; Gruber, Freddy; Altstädt, Volker
Crystallisation behaviour of Polyamide-6 and Polyamide-66 nanocomposites
in Composites Science and Technology volume 66 (2006) issue 3-4. - page 571-575
doi:10.1016/j.compscitech.2005.05.023 ...

Dunger, S.; Sandler, Jan K. W.; Hedicke, Katrin; Altstädt, Volker
Deformation and Fracture Behaviour of Nanocomposites
Fracture of Nano and Engineering Materials and Structures : Proceedings of the 16th European Conference of Fracture
Dordrecht : Springer, 2006. - page 93-94
doi:10.1007/1-4020-4972-2_45 ...

Behrendt, Nico; Altstädt, Volker; Schmidt, Hans-Werner; Zhang, Xiaoqin; Sessler, Gerhard M.
Development of Porous Polypropylene Blends with NA11 Particles and Glass Hollow Spheres by Biax ...
in IEEE Transactions on Dielectrics and Electrical Insulation volume 13 (2006) issue 5. - page 992-1000
doi:10.1109/TDEI.2006.247824 ...

Perez, R. M.; Sandler, Jan K. W.; Altstädt, Volker; Hoffmann, T.; Pospiech, D.; Ciesielski, Michael; Döring, M.
Effect of DOP-based compounds on fire retardancy, thermal stability, and mechanical properties ...
in Journal of Materials Science volume 41 (2006) issue 2. - page 341-353
doi:10.1007/s10853-005-2720-2 ...

Lietz, S.; Sandler, Jan K. W.; Bosch, Eva; Altstädt, Volker
Effect of Organoclay Structure : Morphology and Mechanical Properties of Poly(Styrene-B-Butadie ...
in Kautschuk, Gummi, Kunststoffe volume 59 (2006) issue 7-8. - page 388-395
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&so ...

Perez, R. M.; Sandler, Jan K. W.; Altstädt, Volker; Hoffmann, T.; Pospiech, D.; Artner, Johannes; Ciesielski, Michael; Döring, M.; Balabanovich, Aliaksandr I.; Schartel, Bernhard
Effective halogen-free flame retardancy for a monocomponent polyfunctional epoxy using an oligo ...
in Journal of Materials Science volume 41 (2006) issue 24. - page 8347-8351
doi:10.1007/s10853-006-1079-3 ...

Perez, R. M.; Sandler, Jan K. W.; Altstädt, Volker; Hoffmann, T.; Pospiech, D.; Ciesielski, Michael; Döring, M.; Braun, U.; Knoll, U.; Schartel, Bernhard
Effective halogen-free flame retardants for carbon fibre-reinforced epoxy composites
in Journal of Materials Science volume 41 (2006) issue 15. - page 4981-4984
doi:10.1007/s10853-006-0134-4 ...

Gietl, T.; Lengsfeld, H.; Altstädt, Volker
The efficiency of various toughening agents in novel phenolic type thermoset resin systems
in Journal of Materials Science volume 41 (2006) issue 24. - page 8226-8243
doi:10.1007/s10853-006-0879-9 ...

Hillenbrand, Joachim; Behrendt, Nico; Altstädt, Volker; Schmidt, Hans-Werner; Sessler, Gerhard M.
Electret properties of biaxially stretched polypropylene films containing various additives
in Journal of Physics D volume 39 (2006) issue 3. - page 535-540
doi:10.1088/0022-3727/39/3/017 ...

Langenfelder, Dieter; Sandler, Jan K. W.; Altstädt, Volker
Extrusion foamability of high-temperature polyetherimide
in Zeitschrift Kunststofftechnik = Journal of Plastics Technology volume 2 (2006) issue 2

Ruckdäschel, Holger; Rausch, Julius; Sandler, Jan K. W.; Altstädt, Volker; Schmalz, Holger; Müller, Axel H. E.
Foaming of Miscible and Immiscible Polymer Blends
in MRS Online Proceedings Library volume 977 (2006)
doi:10.1557/PROC-977-0977-FF14-04 ...

Mohmeyer, Nils; Schmidt, Hans-Werner; Kristiansen, Per Magnus; Altstädt, Volker
Influence of Chemical Structure and Solubility of Bisamide Additives on the Nucleation of Isota ...
in Macromolecules volume 39 (2006) issue 17. - page 5760-5767
doi:10.1021/ma060340q ...

Braun, Ulrike; Balabanovich, Aliaksandr I.; Schartel, Bernhard; Knoll, Uta; Artner, Johannes; Ciesielski, Michael; Döring, Manfred; Perez, Raul; Sandler, Jan K. W.; Altstädt, Volker; Hoffmann, Thorsten; Pospiech, Doris
Influence of the oxidation state of phosphorus on the decomposition and fire behaviour of flame ...
in Polymer volume 47 (2006) issue 26. - page 8495-8508
doi:10.1016/j.polymer.2006.10.022 ...

Hausherr, Jan-Marcel; Fischer, Frank; Altstädt, Volker; Krenkel, Walter
Material Characterisation of C/SiC : Comparison of Computed Tomography and Scanning Electron Mi ...
Conference on Damage in Composite Materials CDCM 2006 : Programme & Abstracts 18 -19 of September 2006 in Stuttgart, Germany
Stuttgart , 2006
http://www.ndt.net/article/cdcm2006/papers/hausher ...

Behrendt, Nico; Greiner, C.; Fischer, Frank; Frese, Thomas; Altstädt, Volker; Schmidt, Hans-Werner; Giesa, Reiner; Hillenbrand, Joachim; Sessler, Gerhard M.
Morphology and electret behaviour of microcellular high glass temperature films
in Applied Physics A volume 85 (2006) . - page 87-93
doi:10.1007/s00339-006-3660-7 ...

Langenfelder, D.; Altstädt, Volker
Ein neues Substratmaterial für elektronische Leiterplatten
in Technik in Bayern (2006)

Braun, Ulrike; Knoll, Uta; Schartel, Bernhard; Hoffmann, Thorsten; Pospiech, Doris; Artner, Johannes; Ciesielski, Michael; Döring, Manfred; Perez-Graterol, Raul; Sandler, Jan K. W.; Altstädt, Volker
Novel Phosphorus‐Containing Poly(ether sulfone)s and Their Blends with an Epoxy Resin : Thermal ...
in Macromolecular Chemistry and Physics volume 207 (2006) issue 16. - page 1501-1514
doi:10.1002/macp.200600182 ...

Lietz, Siljana; Sandler, Jan K. W.; Hedicke, Katrin; Altstädt, Volker
Reinforcement of delicate polymer structures by high anisotropic nanofillers
High performance fillers
Shawbury : Rapra Technology Ltd., 2006

2005

Spörrer, Andreas N. J.; Sandler, Jan K. W.; Roth, S.; Altstädt, Volker
Potenzial der Spritzgießcompoundierung zur Fertigung von langfaserverstärkten und hochgefüllten ...
2005
Technomer, Chemnitz, Deutschland

Spörrer, Andreas N. J.; Sandler, Jan K. W.; Roth, S.; Altstädt, Volker
Direct compounding of long-fibre reinforced thermoplastics and evaluation of the mechanical com ...
2005
Bayreuth Polymer Symposium 2005, Bayreuth, Deutschland

Sandler, Jan K. W.; Altstädt, Volker
Polymere Nanocomposite-Schäume
2005
VDI-Fachtagung Polyurethan 2005, Baden-Baden, Deutschland

Werner, P.; Verdejo, R.; Wöllecke, Frank; Altstädt, Volker; Sandler, Jan K. W.; Shaffer, Milo S. P.
Carbon Nanofibres Allow Foaming of Semicrystalline Poly(ether ether ketone)
in Advanced Materials volume 17 (2005) issue 23. - page 2864-2869
doi:10.1002/adma.200500709 ...

Hillenbrand, Joachim; Behrendt, Nico; Mohmeyer, Nils; Altstädt, Volker; Schmidt, Hans-Werner; Sessler, Gerhard M.
Charge retention in biaxially-oriented polypropylene films containing various additives
12th International Symposium on Electrets (ISE 12) : 11-14 September 2005, Salvador, Bahia - Brazil : Proceedings
Piscataway, NJ : IEEE, 2005. - page 276-279
doi:10.1109/ISE.2005.1612375 ...

Puskas, Judit E.; Kumar, Bhuwneesh; Ebied, Amer; Lamperd, Barry; Kaszas, Gabor; Sandler, Jan K. W.; Altstädt, Volker
Comparison of the performance of vulcanized rubbers and elastomer/TPE/iron composites for less ...
in Polymer Engineering & Science volume 45 (2005) issue 7. - page 966-975
doi:10.1002/pen.20363 ...

Ruckdäschel, Holger; Schmalz, Holger; Altstädt, Volker; Müller, Axel H. E.
Compatibilisation of immiscible blends by triblock terpolymers : Influence of molecular archite ...
PPS-21 : Polymer Processing Society, twenty first annual meeting
Halle-Wittenberg : Martin Luther Univ., 2005

Sandler, Jan K. W.; Dunger, S.; Altstädt, Volker
Delicate polymer nanocomposite structures
PPS-21 : Polymer Processing Society, twenty first annual meeting
Halle-Wittenberg : Martin Luther Univ., 2005

Langenfelder, D.; Sandler, Jan K. W.; Altstädt, Volker
Development of a foamed thermoplastic substrate for novel printed circuit boards
PPS-21 : Polymer Processing Society, twenty first annual meeting
Halle-Wittenberg : Martin Luther Univ., 2005

Altstädt, Volker; Behrendt, Nico; Frese, Thomas; Schmidt, Hans-Werner; Giesa, Reiner; Hillenbrand, Joachim; Sessler, Gerhard M.
Development of cellular films for electret applications
12th International Symposium on Electrets : Proceedings
Piscataway, NJ : IEEE, 2005
doi:10.1109/ISE.2005.1612317 ...

Perez, P.; Sandler, Jan K. W.; Altstädt, Volker; Hoffmann, T.; Pospiech, D.; Ciesielski, Michael; Döring, M.
Flame retarded epoxy resin system for liquid composite moulding applications
PPS-21 : Polymer Processing Society, twenty first annual meeting
Halle-Wittenberg : Martin Luther Univ., 2005

Langenfelder, D.; Sandler, Jan K. W.; Altstädt, Volker
Foam extrusion of polyetherimide as flexible light-weight thermoplastic substrates
PPS-21 : Polymer Processing Society, twenty first annual meeting
Halle-Wittenberg : Martin Luther Univ., 2005

Langenfelder, D.; Sandler, Jan K. W.; Vasold, M.; Altstädt, Volker
Foam Extrusion of Polyetherimide with Chemical Blowing Agents
Cellular metals and polymers : CMaP ; proceedings
Uetikon-Zürich : Trans Tech Publ., 2005. - page 213-216

Mantey, Axel; Moll, J.; Kunz, D.; Sandler, Jan K. W.; Altstädt, Volker
Foam Injection-Moulding of Low Density Polymer Components
Cellular metals and polymers : CMaP ; proceedings
Uetikon-Zürich : Trans Tech Publ, 2005. - page 253-256

Mantey, Axel; Sandler, Jan K. W.; Altstädt, Volker; Kunz, D.
Foam injection-moulding of polymer components with a significant density reduction
PPS-21 : Polymer Processing Society, twenty first annual meeting
Halle-Wittenberg : Martin Luther Univ., 2005

Roth, S.; Traßl, Christian; Kunz, D.; Altstädt, Volker
Improved Cost-Performance Relationships for Expandable Polypropylene (EPP) Particle Foam Compon ...
Cellular metals and polymers : CMaP ; proceedings
Uetikon-Zürich : Trans Tech Publ, 2005. - page 243-246

Altstädt, Volker
The Influence of Molecular Variables on Fatigue Resistance in Stress Cracking Environments
Intrinsic Molecular Mobility and Toughness of Polymers II
Berlin : Springer, 2005. - page 105-152 . - (Advances in Polymer Science; 188)
doi:10.1007/b136975 ...

Behrendt, N.; Hillenbrandt, J.; Altstädt, Volker; Kunz, D.
Investigations on electret behavior of stretched filed polypropylene films
PPS-21 : Polymer Processing Society, twenty first annual meeting
Halle-Wittenberg : Martin Luther Univ., 2005

Altstädt, Volker; Sandler, Jan K. W.; Dunger, S.; Hedicke, Katrin
Nanocomposites : Aspects of the deformation and fracture behaviour
Tagungsskript : 10. Problemseminar Deformation und Bruchverhalten von Kunststoffen
Merseburg : Inst. für Polymerwerkstoffe, 2005

Hoffmann, Thorsten; Pospiech, Doris; Häußler, Liane; Komber, Hartmut; Voigt, Dieter; Harnisch, Christina; Kollann, Carsten; Ciesielski, Michael; Döring, Manfred; Perez-Graterol, Raul; Sandler, Jan K. W.; Altstädt, Volker
Novel Phosphorous‐Containing Aromatic Polyethers : Synthesis and Characterization
in Macromolecular Chemistry and Physics volume 206 (2005) issue 4. - page 423-431
doi:10.1002/macp.200400465 ...

Spörrer, Andreas N. J.; Sandler, Jan K. W.; Roth, S.; Kunz, D.; Altstädt, Volker
One-step processing of long fibre-reinforced and highly-filled thermoplastics
2005
21st Annual Meeting of the Polymer Processing Society (PPS-21), Leipzig, Deutschland

Sandler, Jan K. W.; Altstädt, Volker
Physics of Polymer Foams
Cellular metals and polymers : CMaP ; proceedings
Uetikon-Zürich : Trans Tech Publ., 2005. - page 195-200

Mantey, Axel; Altstädt, Volker
Predictable Foam : Foam Injection Mouldings of Lightweight Parts
in Polymotive : Polymers and E-Mobility in the Automotive Industry volume 3 (2005) issue 3/4. - page 31

Altstädt, Volker
Prüfung von Verbundwerkstoffen
Kunststoffprüfung
München : Hanser, 2005. - page 537-590

Spörrer, Andreas N. J.; Sandler, Jan K. W.; Altstädt, Volker
Verarbeitung von langfaserverstärkten, hochgefüllten Thermoplasten im einstufigen Spritzgießpro ...
Tagungshandbuch
Frankfurt, Main : AVK-TV, 2005

2004

Sandler, Jan K. W.; Altstädt, Volker
Influence of the nanoscale morphology on the micro- and macromechanical behavior of composites
2004
International Conference on Flow Processes in Composite Materials, Newark, Delaware, USA

Bucknall, C. B.; Altstädt, Volker
Blends containing core–shell impact modifiers. Part 4. Fatigue crack growth behaviour
in Plastics, Rubber and Composites volume 33 (2004) issue 6. - page 234-241
doi:10.1179/174328904X3649 ...

Altstädt, Volker; Keiter, Sven; Renner, Michael; Schlarb, Alois
Environmental Stress Cracking of Polymers Monitored by Fatigue Crack Growth Experiments
in Macromolecular Symposia volume 214 (2004) issue 1. - page 31-46
doi:10.1002/masy.200451004 ...

Altstädt, Volker; Glatzel, Uwe; Krenkel, Walter
Fahren und Fliegen mit neuen Werkstoffen : oder lassen sich Leichtbau und hohe Temperaturen kop ...
in Spektrum (2004) issue 2. - page 18-21
http://www.neu.uni-bayreuth.de/de/Uni_Bayreuth/Sta ...

El Fray, Miroslawa; Altstädt, Volker
Fatigue behaviour of multiblock thermoplastic elastomers. 3. Stepwise increasing strain test of ...
in Polymer volume 45 (2004) issue 1. - page 263-273
doi:10.1016/j.polymer.2003.10.034 ...

Sandler, Jan K. W.; Werner, P.; Altstädt, Volker; Windle, Alan H.; Shaffer, Milo S. P.
Fine-Tuning the properties of poly(ether ether ketone)/poly(ether imide) blends by the addition ...
From nano-scale interactions to engineering structures : ECCM 11, 11th European Conference on Composite Materials
Rhodos , 2004
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&so ...

Lengsfeld, Hauke; Altstädt, Volker; Döring, Manfred; Just, Berthold; Dittrich, Uwe
Flammschutzmittel : Flammgeschützte Epoxidharze
in Kunststoffe volume 94 (2004) issue 10. - page 300-304

Langenfelder, D.; Sandler, Jan K. W.; Wahlen, L.; Altstädt, Volker
Foam extrusion of polyetherimide with chemical blowing agents
Blowing agents and foaming processes 2004 : the 6th two-day conference dedicated to the critical role of blowing agents in foamed plastics and rubber
Shawbury : Rapra Technology Limited, 2004

Traßl, Christian; Roth, Stephan; Kunz, Dieter; Altstädt, Volker
In Form gebracht : Dicke Blöcke aus expandiertem Polypropylen
in Plastverarbeiter volume 55 (2004) issue 10. - page 186-187
https://www.plastverarbeiter.de/wp-content/uploads ...

Ruckdäschel, Holger; Sandler, Jan K. W.; Altstädt, Volker
Maßgeschneiderte Lösungen
in Plastverarbeiter volume 55 (2004) issue 10. - page 106-108
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&so ...

Kirschnick, Thorsten; Gottschalk, Axel; Ott, Harald; Abetz, Volker; Puskas, Judit; Altstädt, Volker
Melt processed blends of poly(styrene-co-acrylonitrile) and poly(phenylene ether) compatibilize ...
in Polymer volume 45 (2004) issue 16. - page 5653-5660
doi:10.1016/j.polymer.2004.03.106 ...

Kern, Christoph; Jess, Andreas; Altstädt, Volker; Langenfelder, Dieter; Wöllecke, Frank
Messung der Löslichkeit und des Stofftransports von CO2 in polymeren Werkstoffen mit Hilfe eine ...
in Chemie Ingenieur Technik volume 76 (2004) issue 9. - page 1352
doi:10.1002/cite.200490252 ...

Mohmeyer, Nils; Müller, Bettina K. M.; Behrendt, Nico; Hillenbrand, Joachim; Klaiber, Martin; Zhang, Xiaoqin; Smith, Paul; Altstädt, Volker; Sessler, Gerhard M.; Schmidt, Hans-Werner
Nucleation of isotactic polypropylene by triphenylamine-based trisamide derivatives and their i ...
in Polymer volume 45 (2004) issue 19. - page 6655-6663
doi:10.1016/j.polymer.2004.07.046 ...

Jose, Seno; Aprem, Abi Santhosh; Francis, Bejoy; Chandy, Mathew C.; Werner, P.; Altstädt, Volker; Thomas, Sabu
Phase morphology, crystallisation behaviour and mechanical properties of isotactic polypropylen ...
in European Polymer Journal volume 40 (2004) issue 9. - page 2105-2115
doi:10.1016/j.eurpolymj.2004.02.026 ...

Altstädt, Volker; de Lucca Freitas, L.; Schubert, D. W.
Rheological and mechanical properties of poly(α-methylstyrene-co-acrylonitrile)/ poly[(methyl a ...
in Pure and Applied Chemistry volume 76 (2004) issue 2. - page 389-413
doi:10.1351/pac200476020389 ...

Hoffmann, Thorsten; Pospiech, Doris; Häußler, Liane; John, Andreas; Friedel, Peter; Komber, Hartmut; Voigt, Dieter; Werner, Philipp; Altstädt, Volker
Synthesis of PEEK/PSU Multiblock Copolymers
in High Performance Polymers volume 16 (2004) issue 1. - page 3-20
doi:10.1177/0954008304037156 ...

Werner, Philipp; Altstädt, Volker; Jaskulka, Romy; Jacobs, Olaf; Sandler, Jan K. W.; Shaffer, Milo S. P.; Windle, Alan H.
Tribological behaviour of carbon-nanofibre-reinforced poly(ether ether ketone)
in Wear volume 257 (2004) issue 9-10. - page 1006-1014
doi:10.1016/j.wear.2004.07.010 ...

Altstädt, Volker; Traßl, Christian
Zerstörungsfreie Prüfung von Formteilen aus Partikelschäumen mittels moderner Ultraschalltechni ...
Fachtagung EPS-Partikelschaum für hochwertige Dämmung und Verpackung
Würzburg : SKZ-ConSem GmbH, 2004

2003

Hedicke, Katrin; Altstädt, Volker; Wittich, Hans
Thermal and mechanical behavior of polyamide-6 and polyamide-66 nanocomposites
2003
7º CONGRESSO BRASILEIRO DE POLÍMEROS, Belo Horizonte, MG, Brasilien

Sandler, Jan K. W.; Windle, Alan H.; Werner, P.; Altstädt, Volker; van Es, M.; Shaffer, Milo S. P.
Carbon-nanofibre-reinforced poly(ether ether ketone) fibres
in Journal of Materials Science volume 38 (2003) issue 10. - page 2135-2141
doi:10.1023/A:1023715811817 ...

Hoffman, T.; Pospiech, D.; Häußler, Liane; Komber, H.; Pötschke, P.; Voigt, D.; Werner, P.; Altstädt, Volker
Compatibilization of high performance polymer blends using block copolymers
Proceedings : Materials Week 2002
s.l. : Werkstoff-Informationsges., 2003

Puskas, Judit. E.; Antony, Prince; El Fray, Miroslawa; Altstädt, Volker
The effect of hard and soft segment composition and molecular architecture on the morphology an ...
in European Polymer Journal volume 39 (2003) issue 10. - page 2041-2049
doi:10.1016/S0014-3057(03)00130-7 ...

Uribe-Arocha, Paola; Mehler, Christof; Puskas, Judit E.; Altstädt, Volker
Effect of sample thickness on the mechanical properties of injection-molded polyamide-6 and pol ...
in Polymer volume 44 (2003) issue 8. - page 2441-2446
doi:10.1016/S0032-3861(03)00115-0 ...

El Fray, Miroslawa; Altstädt, Volker
Fatigue behaviour of multiblock thermoplastic elastomers. 1. Stepwise increasing load testing o ...
in Polymer volume 44 (2003) issue 16. - page 4635-4642
doi:10.1016/S0032-3861(03)00417-8 ...

El Fray, Miroslawa; Altstädt, Volker
Fatigue behaviour of multiblock thermoplastic elastomers. 2. Dynamic creep of poly(aliphatic/ar ...
in Polymer volume 44 (2003) issue 16. - page 4643-4650
doi:10.1016/S0032-3861(03)00418-X ...

El Fray, Miroslawa; Altstädt, Volker
Fatigue behaviour of novel elastomeric biomaterials for load bearing applications
2003
European Polymer Congress, Stockholm, Schweden

Altstädt, Volker; Werner, Philipp; Sandler, Jan K. W.
Rheological, mechanical and tribological properties of carbon-nanofibre reinforced poly (ether ...
in Polímeros : Ciência e Tecnologia volume 13 (2003) issue 4. - page 218-222
doi:10.1590/S0104-14282003000400005 ...

Aprem, Abi Santhosh; Joseph, Kuruvilla; Mathew, Thomas; Altstädt, Volker; Thomas, Sabu
Studies on accelerated sulphur vulcanization of natural rubber using 1-phenyl-2, 4-dithiobiuret ...
in European Polymer Journal volume 39 (2003) issue 7. - page 1451-1460
doi:10.1016/S0014-3057(02)00382-8 ...

El Fray, Miroslawa; Altstädt, Volker
Synthesis and characterization of multiblock copolyesters containing poly(dimethylsiloxane) in ...
in Macromolecular Symposia volume 199 (2003) issue 1. - page 125-133
doi:10.1002/masy.200350911 ...

2002

Sandler, Jan K. W.; Shaffer, Milo S. P.; Lam, Yeng-Ming; Windle, Alan H.; Werner, Philipp; Altstädt, Volker; Nastalczyk, Jacek; Broza, Georg; Schulte, Karl; Keun, Christian-André
Carbon-Nanofibre-filled thermoplastic composites
Making functional materials with nanotubes : symposium
Warrendale, Pa. , 2002 (Materials Research Society Symposium Proceedings; 706)
doi:10.1557/PROC-706-Z4.7.1 ...

Sandler, Jan K. W.; Werner, Philipp; Shaffer, Milo S. P.; Demchuk, Vitaly; Altstädt, Volker; Windle, Alan H.
Carbon-Nanofibre-Reinforced Poly(ether ether ketone) Composites
in Composites Part A: Applied Science and Manufacturing volume 33 (2002) issue 8. - page 1033-1039
doi:10.1016/S1359-835X(02)00084-2 ...

Ott, H.; Abetz, Volker; Altstädt, Volker; Thomann, Y.; Pfau, A.
Comparative study of a block copolymer morphology by transmission electron microscopy and scann ...
in Journal of Microscopy volume 205 (2002) issue 1. - page 106-108
doi:10.1046/j.0022-2720.2001.00975.x ...

Wöllecke, Frank; Altstädt, Volker; Sandler, Jan K. W.; Rakutt, Dietmar
The influence of elongational properties of the melt on the morphology of PES and PPE cellular ...
Blowing agents and foaming processes 2002 : the fourth one-day conference dedicated to the critical role of blowing agents in foamed plastics and rubber
Shawbury : Rapra Technology Limited, 2002

Wöllecke, Frank; Altstädt, Volker; Sandler, Jan K. W.; Rakutt, Dietmar
The Influence of Melt Elongational Properties on the Morphology of PES Cellular Materials
in Cellular Polymers volume 21 (2002) issue 6. - page 445-454
doi:10.1177/026248930202100603 ...

Puskas, Judit E.; Paulo, Christophe; Altstädt, Volker
Mechanical and Viscoelastic Characterization of Hyperbranched Polyisobutylenes
in Rubber Chemistry and Technology volume 75 (2002) issue 5. - page 853-864
doi:10.5254/1.3547688 ...

El Fray, Miroslawa; Altstädt, Volker
Morphology of multiblock copolymers as studied by micro-thermal analysis
in Designed Monomers and Polymers volume 5 (2002) issue 2-3. - page 353-361
doi:10.1163/156855502760158033 ...

Altstädt, Volker
Neue Materialien Bayreuth
in Kunststoff-Information volume 32 (2002) issue 1609. - page 4-5

Lengsfeld, H.; Altstädt, Volker; Sprenger, S.; Döring, M.; Kollann, C.; Dittrich, U.
Novel organophosphorus curing agents for advanced composite applications
2002 M & P - ideas to reality : 34th international SAMPE technical conference
Covina, Calif. : SAMPE International Business Office, 2002. - page 705-714

Wöllecke, Frank; Altstädt, Volker
The role of extensional rheology in the development of new closed cell foams
Eurheo 2002 : proceedings
Erlangen : LSP, Institute of Polymer Materials, 2002

2001

Lengsfeld, Hauke; Altstädt, Volker; Sprenger, Stephan; Utz, R.
Epoxidharze halogenfrei flammgeschützt ausrüsten : Flammgeschützt härten
in Kunststoffe volume 91 (2001) issue 11. - page 94-97

Dijkstra, Dirk J.; Altstädt, Volker; Mitra, Niladri
Impact Fatigue Behaviour of Rubber‐Modified Glass Fibre Reinforced Polyamide 6
in Macromolecular Materials and Engineering volume 286 (2001) issue 11. - page 669-674
doi:10.1002/1439-2054(20011101)286:11<669::AID-MAM ...

Puskas, Judit E.; Antony, Prince; Kwon, Yongmoon; Paulo, Christophe; Kovar, Milan; Norton, Peter R.; Kaszas, Gabor; Altstädt, Volker
Macromolecular Engineering via Carbocationic Polymerization : Branched Structures, Block Copoly ...
in Macromolecular Materials and Engineering volume 286 (2001) issue 10. - page 565-582
doi:10.1002/1439-2054(20011001)286:10<565::AID-MAM ...

Ott, Harald; Abetz, Volker; Altstädt, Volker
Morphological Studies of Poly(styrene)-block-poly(ethylene-co-butylene)-block-poly(methyl metha ...
in Macromolecules volume 34 (2001) issue 7. - page 2121-2128
doi:10.1021/ma0017079 ...

Wollheim, Thomas; Altstädt, Volker
Neues von Polymer Engineering : Folien und Schaumfolien aus Kunststoffen
in Mensch & Technik volume 7 (2001) issue 4

Kricheldorf, Hans R.; Wollheim, Thomas; Koning, Cor E.; Werumeus Buning, Gerard H.; Altstädt, Volker
Thermoplastic elastomers 1. Poly(ether-ester-imide)s based on 1,4-diaminobutane, trimellitic an ...
in Polymer volume 42 (2001) issue 16. - page 6699-6708
doi:10.1016/S0032-3861(01)00151-3 ...

Kricheldorf, Hans R.; Wollheim, Thomas; Altstädt, Volker; Koning, Cor E.; Werumeus Buning, Gerard H.
Thermoplastic Elastomers. 2. Poly(ether-esterimide)s Based on 1,4-Diaminobutane, Trimellitic An ...
in Journal of Macromolecular Science. Part A volume 38 (2001) issue 5-6. - page 451-466
doi:10.1081/MA-100103360 ...

Wollheim, Thomas; Kricheldorf, Hans R.; Altstädt, Volker; Koning, Cor E.; Werumeus Buning, Gerard H.
Thermoplastic Elastomers. 3. Poly(Ether-Ester-Imide)s Based on 1,6-Diaminohexane, Trimellitic A ...
in High Performance Polymers volume 13 (2001) issue 3. - page 119-132
doi:10.1088/0954-0083/13/3/305 ...

Kricheldorf, H. R.; Wollheim, Thomas; Soliman, M.; Werumeus Buning, Gerard H.; Koning, C. E.; Altstädt, Volker
Thermoplastic Elastomers. 4. Poly(ether-ester-imide)s Derived from Trimellitic Anhydride, 1,6 D ...
in International Journal of Polymeric Materials and Polymeric Biomaterials volume 50 (2001) issue 3-4. - page 359-372
doi:10.1080/00914030108035113 ...

2000

Sandler, Jan K. W.; Lenz, T.; Wöllecke, Frank; Altstädt, Volker; Rakutt, D.
Correlation of melt elongational properties with foam cell morphology
Proceedings of the XIIIth International Congress on Rheology
Glasgow : British Society of Rheology, 2000

Altstädt, Volker; Keiter, S.; Renner, M.; Schlarb, Alois
Accelerated Evaluation of Environmental Aging Monitored by Fatigue Crack Growth Experiments
Recent developments in durability analysis of composite systems : proceedings
Rotterdam : Balkema, 2000. - page 195-201

Altstädt, Volker; Fölster, L.
Bruchmechanik bei erhöhten Temperaturen
Thermische Einsatzgrenzen von Kunststoffen in Verarbeitung und Anwendung
Düsseldorf : Springer-VDI-Verlag, 2000. - page 290-297

Lach, R.; Grellmann, W.; Weidisch, R.; Altstädt, Volker; Kirschnick, Thorsten; Ott, H.; Stadler, R.; Mehler, Christof
Poly(styrene‐block‐butadiene‐block‐styrene‐block‐butadiene) and poly(styrene‐block‐butadiene‐bl ...
in Journal of Applied Polymer Science volume 78 (2000) issue 11. - page 2037-2045
doi:10.1002/1097-4628(20001209)78:11<2037::AID-APP ...

Sandler, Jan K. W.; Wöllecke, Frank; Altstädt, Volker; Wettstein, E.; Rakutt, Dietmar
Principal correlation of PVC melt elongational properties with foam cell morphology
in Cellular Polymers volume 19 (2000) issue 6. - page 371-388

Renner, M.; Altstädt, Volker; Lengsfeld, H.; Sprenger, S.; Jarre, D.; Werner, P.; Wöllecke, Frank; Rückert, C.; Merz, T.; Rettich, B.; de Witt, F.
Schwarzer Rumpf, Werkstoffentwicklung für den CFK-Rumpf
in Mensch & Technik volume 6 (2000) issue 4

Altstädt, Volker; El Fray, Miroslawa; Kirschnick, Thorsten; Ott, H.
Triblock Copolymers for Toughness Modification of Immiscible Engineering Polymerblends
Block Copolymers
New York : Dekker, 2000. - page 479-504

1999

Kallrath, Josef; Altstädt, Volker; Schlöder, Johannes P.; Bock, Hans Georg
Analysis of fatigue crack growth behaviour in polymers and their composites based on ordinary d ...
in Polymer Testing volume 18 (1999) issue 1. - page 11-35
doi:10.1016/S0142-9418(98)00004-X ...

Kirschnick, Thorsten; Altstädt, Volker; Ott, H.; Mehler, Christof; Stadler, R.; Michler, G. H.
Der Einsatz von PS-b-PB-b-PMMA-Dreiblockcopolymeren in PPE/SAN Blends
Polymere
Weinheim : Wiley-VCH, 1999. - page 131-132

Altstädt, Volker
Mehr Freiheit für unternehmerisches Handeln
in Mensch & Technik volume 5 (1999) issue 4

Altstädt, Volker
Polymerwerkstoffe : Neue Materialien für innovative Produkte
Neue Materialien für innovative Produkte : Entwicklungstrends und gesellschaftliche Relevanz
Berlin : Springer, 1999. - page 83-97 . - (Wissenschaftsethik und Technikfolgenbeurteilung; 3)

1998

Altstädt, Volker; Diedrichs, F.; Lenz, T.; Bardenhagen, H.; Jarnot, D.
Polymer Foams as Core Materials in Sandwich Laminates : Comparison with Honeycomb
in Polymers and Polymer Composites volume 6 (1998) issue 5. - page 295-304

1997

Laun, H. M.; Lyngaae-Jorgensen, J.; Altstädt, Volker; Schytt, V.
Rheological and Mechanical Properties of PaMSAN/PMMA Blends in Miscible and Phase Separated Reg ...
in Polymer Networks & Blends volume 7 (1997) issue 2. - page 77-86

1996

Altstädt, Volker; Loth, W.; Schlarb, Alois
Comparison of Fatigue Test Methods for Research and Development of Polymers and Polymer Composi ...
Progress in Durability Analysis of Composite Systems : proceedings
Rotterdam : Balkema, 1996. - page 75-80

1995

Altstädt, Volker
Moderne Prüfmethoden zur Beschreibung des Ermüdungsverhaltens von Polymerwerkstoffen
1995
Konferenz des Deutschen Verbandes für Materialforschung und -prüfung e.V.,

Koster, C.; Altstädt, Volker; Kausch, H. H.; Cantwell, W. J.
Split rate fatigue propagation in polymer blends
in Polymer Bulletin volume 34 (1995) issue 2. - page 243-248
doi:10.1007/BF00316402 ...

1994

Wilson, D.; Altstädt, Volker; Maier, M.; Prandy, J.; Thoma, Klaus; Vinckier, D.
An Analytical and Experimental Evaluation of 0/90 Laminate Tests for Compression Characterizati ...
in Journal of Composites Technology and Research volume 16 (1994) issue 2. - page 146-153
doi:10.1520/CTR10404J ...

Altstädt, Volker
Moderne Prüfmethoden zur Untersuchung von Struktur-Eigenschaftsbeziehungen bei Verbundwerkstoff ...
in Materialprüfung volume 36 (1994) issue 4. - page 113-118

Maier, Martin; Altstädt, Volker; Vinckier, David; Thoma, Klaus
Numerical and experimental analysis of the compact tension test for a group of modified epoxy r ...
in Polymer Testing volume 13 (1994) issue 1. - page 55-66
doi:10.1016/0142-9418(94)90040-X ...

1993

Schlarb, Alois; Altstädt, Volker; Baumgartl, H.; Drumm, R.; Brentrup, K.
Glasmattenverstärktes Polypropylen : ein recyclingfähiger Werkstoff
in Kunststoffe volume 83 (1993) issue 5. - page 377-382

Altstädt, Volker; Gerth, Dale; Stängle, Michael; Recker, Hans Gerd
Interlaminar crack growth in third-generation thermoset prepreg systems
in Polymer volume 34 (1993) issue 4. - page 907-909
doi:10.1016/0032-3861(93)90379-O ...

1992

Altstädt, Volker; Gerth, Dale; Recker, Hans Gerd; Stängle, Michael
Interlaminar crack growth in third-generation thermoset prepreg systems
in Polymer Preprints of the American Chemical Society volume 33 (1992) issue 1. - page 400-401

1991

Altstädt, Volker
Effect of the Polymer Matrix on the Properties of Advanced Composites
in Macromolecular Symposia volume 50 (1991) issue 1. - page 137-145
doi:10.1002/masy.19910500114 ...

Maier, M.; Altstädt, Volker; Vinckier, D.; Thoma, Klaus
Härtetest für Faserverbundwerkstoffe im Computer
in Kunststoffberater volume 36 (1991) issue 12. - page 36-41

Altstädt, Volker; Lang, R. W.; Neu, A.
The Influence of Resin, Fiber and Interface on Delamination Fatigue Crack Growth of Composites
Durability of Polymer Based Composite Systems for Structural Applications : proceedings of the international colloquium held in Brussels, Belgium, 27 - 31 August 1990
London : Elsevier, 1991. - page 180-189

1990

Recker, H. G.; Altstädt, Volker; Eberle, W.; Folda, T.; Gerth, D.; Heckmann, Walter; Ittemann, P.; Tesch, H.; Weber, T.
Toughened Thermosets for Damage Tolerant Carbon Fibre Reinforced Composites
in Sampe Journal volume 26 (1990) issue 2. - page 73-78

1988

Renz, Rainer; Altstädt, Volker; Ehrenstein, G. W.
Hysteresis Measurements for Characterizing the Dynamic Fatigue of R-SMC
in Journal of Reinforced Plastics and Composites volume 7 (1988) issue 5. - page 413-434
doi:10.1177/073168448800700502 ...

Lang, R. W.; Altstädt, Volker
Polymer matrix effects on interlaminar crack growth in advanced composites
in Abstracts of Papers of the American Chemical Society volume 196 (1988) . - page 61

Lang, R. W.; Altstädt, Volker
Polymer Matrix Effects on Interlaminar Crack Growth in Advanced Composites
in Polymer Preprints of the American Chemical Society volume 29 (1988) issue 2. - page 145-146

1987

Altstädt, Volker; Ehrenstein, G. W.
Charakterisierung von Faserverbundwerkstoffen mittels Hysteresismessung : Aufschlussreiche Meth ...
in Industrie-Anzeiger (1987) . - page 23-28

Altstädt, Volker
Hysteresismessungen zur Charakterisierung der mechanisch-dynamischen Eigenschaften von R-SMC : ...
Kassel, Institut für Werkstofftechnik, 1987. - 143 page
(dissertation, , )

1986

Altstädt, Volker; Ehrenstein, G. W.
Hysteresismessungen zur Charakterisierung des Ermüdungsverhaltens von Polymerwerkstoffen
1986
METAV 86, Düsseldorf

Hegler, R. P.; Altstädt, Volker; Ehrenstein, G. W.; Mennig, G.; Scharschmidt, J.; Weber, G.
Einfluss stofflicher Parameter auf die Faserorientierung beim Verarbeiten kurzfaserverstärkter ...
in Kunststoffe volume 76 (1986) issue 9. - page 766-771

Altstädt, Volker
GFK-Industrie in den USA : dynamische, technische und wirtschaftliche Entwicklung
in Kunststoffe volume 76 (1986) issue 6. - page 530-531

Renz, Rainer; Altstädt, Volker; Ehrenstein, G. W.
Schwingfestigkeitsverhalten von faserverstärkten Kunststoffen (SMC)
Faserverbundwerkstoffe. Band 3
Berlin : Springer, 1986. - page 441-518
doi:10.1007/978-3-642-82624-5_6 ...

1985

Altstädt, Volker; Ehrenstein, G. W.
Wärmedämmstege aus glasfaserverstärktem Polyamid für wärmegedämmte Aluminiumfenster und Fassade ...
in Fenster und Fassade volume 12 (1985) issue 3. - page 52-58

1984

Ehrenstein, G. W.; Altstädt, Volker
Methods of Preparation to Reveal the Structural Arrangements of Glass Fibre Reinforced Thermopl ...
in Practical Metallography volume 21 (1984) . - page 440-459
doi:10.1515/pm-1984-210903 ...

Prof. Dr. Volker Altstädt

Faculty of Engineering Science
Department of Polymer Engineering


Prof. Dr.-Ing. Volker Altstädt

Department of Engineering Science

University of Bayreuth
Universitätsstraße 30
95447 Bayreuth

Phone: +49 (0)921 / 55-7470
E-mail: altstaedt@uni-bayreuth.de
Homepage: http://polymer-engineering.de/en/

Webmaster: Univ.Prof.Dr. Hans-Werner Schmidt

Facebook Twitter Youtube-Kanal Instagram LinkedIn Blog Kontakt