Prof. ​Dr.-Ing. Holger Ruckdäschel

2025

Rothenhäusler, Florian; Hüser, Daniel; Ruckdäschel, Holger
Curing reactions, reaction kinetics, and latency of epoxy resin cured with L-tryptophan and L-t ...
In: Journal of Applied Polymer Science Bd. 142 (2025) Heft 4
doi:10.15495/EPub_UBT_00008313 ...

Szpoganicz, Eduardo; Hübner, Fabian; Beier, Uwe; Geistbeck, Matthias; Ruckdäschel, Holger
The effect of prepreg ply thickness in carbon fiber reinforced composites on intralaminar tough ...
In: Composites Part B: Engineering Bd. 292 (2025)
doi:10.15495/EPub_UBT_00008245 ...

Gerlach, Michael; Koedel, Justus; Seibt, Sebastian; Baumgärtner, Benjamin; Callsen, Christoph; Voss, Gundula; Puchtler, Florian; Weidinger, Andy; Puchas, Georg; Leykam, Daniel; Altstädt, Volker; Schobert, Rainer; Ruckdäschel, Holger; Biersack, Bernhard
The influence of substituted indigo derivatives on the preparation and properties of “Maya” pig ...
In: Dyes and Pigments Bd. 233 (2025)
doi:10.1016/j.dyepig.2024.112530 ...

2024

Kuhnigk, Justus
Aufklärung von Struktur-Eigenschafts-Beziehungen beim Schäumen und Diffusions-Verschweißen von ...
Bayreuth, 2024. - XI, 167 S.
doi:10.15495/EPub_UBT_00007751 ...
(Dissertation, 2024, )

Brütting, Christian; Dreier, Julia; Bonten, Christian; Ruckdäschel, Holger
Biobased Immiscible Polylactic Acid (PLA) : Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) ...
In: Journal of Polymers and the Environment Bd. 32 (2024) Heft 9. - S. 4182-4195
doi:10.15495/EPub_UBT_00007988 ...

Kayßer, Simon Tino
Carbamat-geschäumte Epoxidharze – Optimierung von Brandverhalten und Mechanik durch Füllstoffe ...
Bayreuth, 2024. - XIV, 192 S.
doi:10.15495/EPub_UBT_00007835 ...
(Dissertation, 2024, )

Bethke, Christian
Carbamat-geschäumte Epoxidharze : Synthese und Eigenschaften
Bayreuth, 2024. - XI, 168 S.
doi:10.15495/EPub_UBT_00008007 ...
(Dissertation, 2024, )

Meuchelböck, Johannes; Koch, Ilja; Grüber, Bernd; Müller-Pabel, Michael; Gude, Maik; Ruckdäschel, Holger
Compression testing of EPP bead foams in a vacuum chamber : Experimental investigation on the i ...
In: Polymer Testing Bd. 132 (2024)
doi:10.15495/EPub_UBT_00008347 ...

Albuquerque, Rodrigo Q.; Rothenhäusler, Florian; Ruckdäschel, Holger
Designing formulations of bio-based, multicomponent epoxy resin systems via machine learning
In: MRS Bulletin Bd. 49 (2024) . - S. 59-70
doi:10.15495/EPub_UBT_00007411 ...

Weingart, Nick
Entwicklung eines kontinuierlichen Schäumprozesses für neuartige expandierte und expandierbare ...
Bayreuth, 2024. - V,144 S.
doi:10.15495/EPub_UBT_00007440 ...
(Dissertation, 2023, )

Standau, Tobias; Lindner, Kathrin; Altstädt, Volker; Ruckdäschel, Holger
Evaluation of the potential of polybutylene terephthalate/Poly(phenylene oxide) blends for bead ...
In: AIP Conference Proceedings Bd. 3158 (2024)
doi:10.15495/EPub_UBT_00008255 ...

Töpfer, Christian; Dippold, Marcel; Ruckdäschel, Holger
Influence of dielectric properties of polybutylene terephthalate and respective foam beads on p ...
In: Journal of Applied Polymer Science Bd. 141 (2024) Heft 8
doi:10.15495/EPub_UBT_00007509 ...

Rothenhäusler, Florian; Ouali, Ahmed-Amine; Rinberg, Roman; Demleitner, Martin; Kroll, Lothar; Ruckdäschel, Holger
Influence of sodium hydroxide, silane, and siloxane treatments on the moisture sensitivity and ...
In: Polymer Composites Bd. 45 (2024) Heft 10. - S. 8937-8948
doi:10.15495/EPub_UBT_00007961 ...

Sunder, Sruthi; Jauregui Rozo, Maria; Inasu, Sneha; Schartel, Bernhard; Ruckdäschel, Holger
Investigating the changing dynamics of processing, temperature-based mechanics, and flame retar ...
In: Journal of Applied Polymer Science Bd. 141 (2024) Heft 39
doi:10.15495/EPub_UBT_00007977 ...

Shah, Karim Ali; Brütting, Christian; Albuquerque, Rodrigo Q.; Ruckdäschel, Holger
Machine learning investigation of polylactic acid bead foam extrusion
In: Journal of Applied Polymer Science Bd. 141 (2024) Heft 30
doi:10.15495/EPub_UBT_00007965 ...

Shah, Karim Ali; Albuquerque, Rodrigo Q.; Brütting, Christian; Ruckdäschel, Holger
Machine learning-based time series analysis of polylactic acid bead foam extrusion
In: Journal of Applied Polymer Science Bd. 141 (2024) Heft 44
http://nbn-resolving.org/urn:nbn:de:bvb:703-epub-8 ...

Hübner, Fabian
Modifizierte Epoxidharzformulierungen zur Herstellung von kohlenstofffaserverstärkten kryogenen ...
Bayreuth, 2024
doi:10.15495/EPub_UBT_00007699 ...
(Dissertation, 2024, )

Bauriedel, Niklas; Albuquerque, Rodrigo Q.; Utz, Julia; Geis, Nico; Ruckdäschel, Holger
Monitoring of fused filament fabrication (FFF) : An infrared imaging and machine learning appro ...
In: Journal of Polymer Science Bd. 62 (2024) Heft 24. - S. 5633-5641
doi:10.15495/EPub_UBT_00008305 ...

Himmelsbach, Andreas; Brütting, Christian; Akdevelioglu, Yavuz; Albuquerque, Rodrigo Q.; Nofar, Mohammadreza; Ruckdäschel, Holger
Non-isothermal crystallization kinetic of recycled PET and its blends with PBT modified with ep ...
In: Journal of Applied Polymer Science Bd. 141 (2024) Heft 19
doi:10.15495/EPub_UBT_00007945 ...

Aksit, Alper
Properties of Micro- and Nanostructured PA66/PPE Polymer Blends
Bayreuth, 2024. - VIII, 153 S.
doi:10.15495/EPub_UBT_00007413 ...
(Dissertation, 2023, )

Bard, Simon; Tran, Thomas; Schönl, Florian; Rosenfeldt, Sabine; Demleitner, Martin; Ruckdäschel, Holger; Retsch, Markus; Altstädt, Volker
Relationship between the tensile modulus and the thermal conductivity perpendicular and in fibe ...
In: Carbon Letters Bd. 34 (2024) . - S. 361-369
doi:10.1007/s42823-023-00568-2 ...

Lebeda, Flora; Demleitner, Martin; Pongratz, Annalena; Ruckdäschel, Holger; Retsch, Markus
Shaping Thermal Transport and Temperature Distribution via Anisotropic Carbon Fiber Reinforced ...
In: ACS Omega Bd. 9 (2024) Heft 37. - S. 39232-39241
doi:10.1021/acsomega.4c06558 ...

Rothenhäusler, Florian; Ruckdäschel, Holger
Strategies for the fast optimization of the glass transition temperature of sustainable epoxy r ...
In: Journal of Applied Polymer Science Bd. 141 (2024) Heft 21
doi:10.15495/EPub_UBT_00007951 ...

Sunder, Sruthi; Jauregui Rozo, Maria; Inasu, Sneha; Schartel, Bernhard; Ruckdäschel, Holger
A systematic investigation of the transfer of polyphosphate/inorganic silicate flame retardants ...
In: Polymer Composites Bd. 45 (2024) Heft 10. - S. 9389-9406
doi:10.15495/EPub_UBT_00007958 ...

Freudenberg, Wolfgang; Wich, Felix; Best, Jalena; Moukhina, Elena; Scherzer, Tim; Ruckdäschel, Holger; Langhof, Nico; Schafföner, Stefan
Thermo-oxidative crosslinking of carbon fiber reinforced PEEK (Polyetheretherketone) for additi ...
In: Advanced Manufacturing : Polymer & Composites Science Bd. 10 (2024) Heft 1
doi:10.1080/20550340.2024.2387422 ...

Albuquerque, Rodrigo Q.; Meuchelböck, Johannes; Ruckdäschel, Holger
A unified approach for evaluating mechanical compression tests for polymer bead foams
In: Journal of Polymer Science Bd. 62 (2024) Heft 6. - S. 1034-1043
doi:10.15495/EPub_UBT_00007510 ...

Brütting, Christian
Untersuchung des Schäumverhaltens von Polylactid und Polylactid/Poly(hydroxybutyrat-co-hydroxyv ...
Bayreuth, 2024. - XVII, 131, LXX S.
doi:10.15495/EPub_UBT_00007774 ...
(Dissertation, 2024, )

Menzel, Teresa
Von Makro- zu Mikroplastik : Degradationsmodelle und Extrapolation von Verweilzeiten unter abio ...
Bayreuth, 2024. - xi, 124, xxxvii S.
doi:10.15495/EPub_UBT_00007333 ...
(Dissertation, 2023, )

2023

Standau, Tobias
Polybutylenterephthalat-Partikelschäume mit erhöhter thermischer Beständigkeit [:] – Einfluss e ...
Bayreuth, 2023. - 152 S.
(Dissertation, , )

Rothenhäusler, Florian; Ruckdäschel, Holger
Amino Acids as Bio-Based Curing Agents for Epoxy Resin : Correlation of Network Structure and M ...
In: Polymers Bd. 15 (2023) Heft 2
doi:10.3390/polym15020385 ...

Krause, Katharina
Co-Injektion im Spritzgießen : Sandwichbauteile mit geschäumtem Kern und weichelastischer Haut ...
Bayreuth, 2023. - VI, 131 S.
doi:10.15495/EPub_UBT_00007186 ...
(Dissertation, 2023, )

Soleimanpour, Amirali; Khonakdar, Hanieh; Mousavi, Seyed Rasoul; Banaei, Nastaran; Hemmati, Farkhondeh; Arjmand, Mohammad; Ruckdäschel, Holger; Khonakdar, Hossein Ali
Continuous extrusion foaming process of biodegradable nanocomposites based on poly(lactic acid) ...
In: Journal of Applied Polymer Science Bd. 140 (2023) Heft 19
doi:10.15495/EPub_UBT_00007276 ...

Sommer, Caroline; Nguyen, Johnny; Menzel, Teresa; Ruckdäschel, Holger; Koch, Martin
Determining weathering-induced heterogeneous oxidation profiles of polyethylene, polypropylene ...
In: Chemosphere Bd. 343 (2023)
doi:10.1016/j.chemosphere.2023.140105 ...

Meuchelböck, Johannes; Standau, Tobias; Preiss, Gina; Müller-Pabel, Michael; Koch, Ilja; Grüber, Bernd; Gude, Maik; Altstädt, Volker; Ruckdäschel, Holger
Effect of density on the fatigue behaviour of EPP and ETPU bead foams
In: AIP Conference Proceedings Bd. 2884 (2023) Heft 1
doi:10.15495/EPub_UBT_00007767 ...

Du, Ngoc Uy Lan; Bethke, Christian; Gong, Shuaiping; Altstädt, Volker; Ruckdäschel, Holger
Foaming epoxy-amine-carbamate : The effect of different neat amines on rheological and cellular ...
In: Journal of Cellular Plastics Bd. 59 (2023) Heft 3. - S. 231-247
doi:10.15495/EPub_UBT_00007651 ...

Utz, Julia; Geis, Nico; Baur, Maximilian; Ruckdäschel, Holger
Influence of glass fibers on the processability and mechanical properties of PP homopolymer for ...
In: AIP Conference Proceedings Bd. 2607 (2023) Heft 1
doi:10.15495/EPub_UBT_00007763 ...

Rothenhäusler, Florian; Kettenbach, Marcel; Ruckdäschel, Holger
Influence of the Stoichiometric Ratio on the Curing Kinetics and Mechanical Properties of Epoxy ...
In: Macromolecular Materials and Engineering Bd. 308 (2023) Heft 11
doi:10.15495/EPub_UBT_00007604 ...

Rothenhäusler, Florian; Ruckdäschel, Holger
Influence of the stoichiometric ratio on the in-situ formation of crystals and the mechanical p ...
In: Polymer Engineering & Science Bd. 63 (2023) Heft 12. - S. 4007-4018
doi:10.15495/EPub_UBT_00007355 ...

Weingart, Nick; Raps, Daniel; Lamka, Marc; Demleitner, Martin; Altstädt, Volker; Ruckdäschel, Holger
Influence of thermo-oxidative aging on the mechanical properties of the bead foams made of poly ...
In: Journal of Polymer Science Bd. 61 (2023) Heft 21. - S. 2742-2757
doi:10.15495/EPub_UBT_00007295 ...

Rothenhäusler, Florian; Ruckdäschel, Holger
Interplay of curing and thermal degradation in epoxy resins cured with amino acids : Influence ...
In: Journal of Applied Polymer Science Bd. 140 (2023) Heft 45
doi:10.15495/EPub_UBT_00007296 ...

Himmelsbach, Andreas; Standau, Tobias; Kuhnigk, Justus; Bubmann, Tobias; Akdevelioglu, Yavuz; Nofar, Mohammadreza; Ruckdäschel, Holger
Investigation of the Reaction Kinetics of Poly(butylene terephthalate) and Epoxide Chain Extend ...
In: Macromolecular Materials and Engineering, Macromolecular Materials and Engineering Bd. 308 (2023) Heft 7
doi:10.15495/EPub_UBT_00008330 ...

Aksit, Merve
Low-Density Reactive-Extruded Polybutylene Terephthalate Foams with Enhanced Compressive Proper ...
Bayreuth, 2023. - XII, 153 S.
doi:10.15495/EPub_UBT_00006869 ...
(Dissertation, 2023, )

Standau, Tobias
Polybutylenterephthalat-Partikelschäume mit erhöhter thermischer Beständigkeit : Einfluss eines ...
Bayreuth, 2023. - XI, 140 S.
doi:10.15495/EPub_UBT_00007040 ...
(Dissertation, 2023, )

Tayouri, Mohammad Iman; Estaji, Sara; Mousavi, Seyed Rasoul; Yazdanbakhsh, Amirhosein; Nouranian, Sasan; Ruckdäschel, Holger; Khonakdar, Hossein Ali
Polystyrene/Polyolefin Elastomer Blends Loaded with Halloysite Nanotubes : Morphological, Mecha ...
In: Macromolecular Materials and Engineering Bd. 308 (2023) Heft 9
doi:10.15495/EPub_UBT_00007606 ...

Obermeier, Frederik
Prozess- und materialtechnische Entwicklung von thermoplastischen Hybridverbunden mit Holzfaser ...
Bayreuth, 2023. - 149 S.
doi:10.15495/EPub_UBT_00007170 ...
(Dissertation, 2023, )

Standau, Tobias; Himmelsbach, Andreas; Stierle, Catharina; Meuchelböck, Johannes; Altstädt, Volker; Ruckdäschel, Holger
Quantification of the resistance against deformation under thermal load of different polymeric ...
In: AIP Conference Proceedings Bd. 2884 (2023) Heft 1
doi:10.15495/EPub_UBT_00007764 ...

Brütting, Christian; Standau, Tobias; Meuchelböck, Johannes; Schreier, Peter; Ruckdäschel, Holger
A review on semi-crystalline polymer bead foams from stirring autoclave : Processing and proper ...
In: e-Polymers Bd. 23 (2023) Heft 1
doi:10.15495/EPub_UBT_00007601 ...

Max, Florian; Hübner, Fabian; Frisch, Michael; Ruckdäschel, Holger
A scientific view on composite inlays in running shoes : The influence of epoxy crosslink densi ...
In: Results in Materials Bd. 18 (2023)
doi:10.1016/j.rinma.2023.100404 ...

2022

Bubmann, Tobias
Transparente PC/PMMA Blends : Einfluss der Funktionalisierung auf optische, morphologische und ...
Bayreuth, 2022. - X, 169 S.
doi:10.15495/EPub_UBT_00006509 ...
(Dissertation, 2022, )

Utz, Julia; Zubizarreta, Jokin; Geis, Nico; Immonen, Kirsi; Kangas, Heli; Ruckdäschel, Holger
3D Printed Cellulose-Based Filaments : Processing and Mechanical Properties
In: Materials Bd. 15 (2022) Heft 19
doi:10.15495/EPub_UBT_00006955 ...

Heinz, Michael; Callsen, Christoph; Stöcklein, Waldemar; Altstädt, Volker; Ruckdäschel, Holger
Halogen-free flame-retardant cable compounds : Influence of magnesium-di-hydroxide filler and c ...
In: Polymer Engineering & Science Bd. 62 (2022) Heft 2. - S. 461-471
doi:10.15495/EPub_UBT_00006112 ...

Demleitner, Martin; Schönl, Florian; Angermann, Jörg; Fässler, Pascal; Lamparth, Iris; Rist, Kai; Schnur, Thomas; Catel, Yohann; Rosenfeldt, Sabine; Retsch, Markus; Ruckdäschel, Holger; Altstädt, Volker
Influence of Block Copolymer Concentration and Resin Crosslink Density on the Properties of UV- ...
In: Macromolecular Materials and Engineering Bd. 307 (2022) Heft 10
doi:10.1002/mame.202200320 ...

Bubmann, Tobias; Shi, Simon; Brückner, Alexander; Menzel, Teresa; Ruckdäschel, Holger; Schlarb, Alois K.; Altstädt, Volker
Influence of Sample Wetting Method on ESC-Behavior of PMMA under Dynamic Fatigue Crack Propagat ...
In: Materials Bd. 15 (2022) Heft 12
doi:10.3390/ma15124114 ...

Meides, Nora; Mauel, Anika; Menzel, Teresa; Altstädt, Volker; Ruckdäschel, Holger; Senker, Jürgen; Strohriegl, Peter
Quantifying the fragmentation of polypropylene upon exposure to accelerated weathering
In: Microplastics and Nanoplastics Bd. 2 (2022)
doi:10.1186/s43591-022-00042-2 ...

Standau, Tobias; Nofar, Mohammadreza; Dörr, Dominik; Ruckdäschel, Holger; Altstädt, Volker
A Review on Multifunctional Epoxy-Based Joncryl® ADR Chain Extended Thermoplastics
In: Polymer Reviews Bd. 62 (2022) Heft 2. - S. 296-350
doi:10.1080/15583724.2021.1918710 ...

Sommer, Caroline; Nguyen, Johnny; Menzel, Teresa; Prume, Julia A.; Ruckdäschel, Holger; Koch, Martin
Weathering-induced oxidation : An investigation of artificially aged polystyrene samples using ...
In: Polymer Testing Bd. 112 (2022)
doi:10.1016/j.polymertesting.2022.107623 ...

Kuhnigk, Justus; Krebs, Niko; Standau, Tobias; Dippold, Marcel; Ruckdäschel, Holger
Evaluation of the Fusion Quality of Bead Foams Made from Polybutylene Terephthalate (E-PBT) Dep ...
In: Macromolecular Materials and Engineering Bd. 307 (2022) Heft 11
doi:10.15495/EPub_UBT_00007127 ...

Nofar, Mohammadreza; Utz, Julia; Geis, Nico; Altstädt, Volker; Ruckdäschel, Holger
Foam 3D Printing of Thermoplastics : A Symbiosis of Additive Manufacturing and Foaming Technolo ...
In: Advanced Science Bd. 9 (2022) Heft 11
doi:10.15495/EPub_UBT_00006921 ...

Brütting, Christian; Dreier, Julia; Bonten, Christian; Altstädt, Volker; Ruckdäschel, Holger
Glass transition of PLA-CO₂ mixtures after solid-state saturation
In: Journal of Cellular Plastics Bd. 58 (2022) Heft 6. - S. 917-931
doi:10.15495/EPub_UBT_00007060 ...

Rothenhäusler, Florian; Ruckdäschel, Holger
l-Arginine as a Bio-Based Curing Agent for Epoxy Resins : Glass Transition Temperature, Rheolog ...
In: Polymers Bd. 14 (2022) Heft 20
doi:10.15495/EPub_UBT_00006932 ...

Rothenhäusler, Florian; Ruckdäschel, Holger
l-Arginine as Bio-Based Curing Agent for Epoxy Resins : Temperature-Dependence of Mechanical Pr ...
In: Polymers Bd. 14 (2022) Heft 21
doi:10.15495/EPub_UBT_00006963 ...

Albuquerque, Rodrigo Q.; Brütting, Christian; Standau, Tobias; Ruckdäschel, Holger
A machine learning investigation of low-density polylactide batch foams
In: e-Polymers Bd. 22 (2022) Heft 1. - S. 318-331
doi:10.15495/EPub_UBT_00006939 ...

Meier, Sven; Albuquerque, Rodrigo Q.; Demleitner, Martin; Ruckdäschel, Holger
Modeling glass transition temperatures of epoxy systems : a machine learning study
In: Journal of Materials Science Bd. 57 (2022) Heft 29. - S. 13991-14002
doi:10.15495/EPub_UBT_00007021 ...

2021

Brütting, Christian; Dreier, J.; Bonten, C.; Altstädt, Volker; Ruckdäschel, Holger
Amorphous Polylactide Bead Foam : Effect of Talc and Chain Extension on Foaming Behavior and Co ...
In: Journal of Renewable Materials Bd. 9 (2021) Heft 11. - S. 1859-1868
doi:10.32604/jrm.2021.016244 ...

Koedel, Justus; Seibt, Sebastian; Callsen, Christoph; Puchtler, Florian; Weise, Markus; Weidinger, Andy; Altstädt, Volker; Ruckdäschel, Holger; Schobert, Rainer; Biersack, Bernhard
DNA as a Natural Flame Retardant for Cellulose Acetate Polymer Mixtures
In: ChemistrySelect Bd. 6 (2021) Heft 15. - S. 3605-3609
doi:10.1002/slct.202004493 ...

Mattar, Nour; Langlois, Valérie; Renard, Estelle; Rademacker, Tim; Hübner, Fabian; Demleitner, Martin; Altstädt, Volker; Ruckdäschel, Holger; Rios de Anda, Agustin
Fully Bio-Based Epoxy-Amine Thermosets Reinforced with Recycled Carbon Fibers as a Low Carbon-F ...
In: ACS Applied Polymer Materials Bd. 3 (2021) Heft 1. - S. 426-435
doi:10.1021/acsapm.0c01187 ...

Menzel, Teresa; Weigert, Sebastian; Gagsteiger, Andreas; Eich, Yannik; Sittl, Sebastian; Papastavrou, Georg; Ruckdäschel, Holger; Altstädt, Volker; Höcker, Birte
Impact of Enzymatic Degradation on the Material Properties of Poly(Ethylene Terephthalate)
In: Polymers Bd. 13 (2021) Heft 22
doi:10.3390/polym13223885 ...

Kuhnigk, Justus; Raps, Daniel; Standau, Tobias; Luik, Marius; Altstädt, Volker; Ruckdäschel, Holger
Insights into the Bead Fusion Mechanism of Expanded Polybutylene Terephthalate (E-PBT)
In: Polymers Bd. 13 (2021) Heft 4
doi:10.3390/polym13040582 ...

Dreier, Julia; Brütting, Christian; Ruckdäschel, Holger; Altstädt, Volker; Bonten, Christian
Investigation of the Thermal and Hydrolytic Degradation of Polylactide during Autoclave Foaming
In: Polymers Bd. 13 (2021) Heft 16
doi:10.3390/polym13162624 ...

Kaysser, Simon T.; Bethke, Christian; Romero, Isabel Fernandez; Wei, Angeline Wo Weng; Keun, Christian A.; Ruckdäschel, Holger; Altstädt, Volker
Investigations on Epoxy-Carbamate Foams Modified with Different Flame Retardants for High-Perfo ...
In: Polymers Bd. 13 (2021) Heft 22
doi:10.15495/EPub_UBT_00006577 ...

Hübner, Fabian; Brückner, Alexander; Dickhut, Tobias; Altstädt, Volker; Rios de Anda, Agustín; Ruckdäschel, Holger
Low temperature fatigue crack propagation in toughened epoxy resins aimed for filament winding ...
In: Polymer Testing Bd. 102 (2021)
doi:10.1016/j.polymertesting.2021.107323 ...

Du Ngoc, Uy Lan; Bethke, Christian; Altstädt, Volker; Ruckdäschel, Holger
New Insights on Expandability of Pre-Cured Epoxy Using a Solid-State CO₂-Foaming Technique
In: Polymers Bd. 13 (2021) Heft 15
doi:10.3390/polym13152441 ...

Meides, Nora; Menzel, Teresa; Pötzschner, Björn; Löder, Martin G. J.; Mansfeld, Ulrich; Strohriegl, Peter; Altstädt, Volker; Senker, Jürgen
Reconstructing the Environmental Degradation of Polystyrene by Accelerated Weathering
In: Environmental Science & Technology Bd. 55 (2021) Heft 12. - S. 7930-7938
doi:10.1021/acs.est.0c07718 ...

Bethke, Christian; Kaysser, Simon T.; Du Ngoc, Uy Lan; Goller, Sebastian M.; van der Zwan, Kasper P.; Senker, Jürgen; Ruckdäschel, Holger; Altstädt, Volker
Synthesis and Characterization of Dual-Functional Carbamates as Blowing and Curing Agents for E ...
In: Industrial & Engineering Chemistry Research Bd. 60 (2021) Heft 19. - S. 7065-7080
doi:10.1021/acs.iecr.0c05262 ...

Bethke, Christian; Goller, Sebastian M.; Du Ngoc, Uy Lan; Kaysser, Simon Tino; Altstädt, Volker; Ruckdäschel, Holger
Tailoring Epoxy Resin Foams by Pre-Curing with Neat Amine Hardeners and Its Derived Carbamates
In: Polymers Bd. 13 (2021) Heft 8
doi:10.3390/polym13081348 ...

2013

Ruckdäschel, Holger; Sandler, Jan K. W.; Altstädt, Volker
On the Friction and Wear of Carbon Nanofibre-Reinforced PEEK-Based Polymer Nanocomposites
Tribology of polymeric nanocomposites : friction and wear of bulk materials and coatings. 2nd Edition
Amsterdam : Elsevier, Butterworth-Heinemann, 2013 (Tribology and Interface Engineering Series; 55)

2011

Ruckdäschel, Holger; Ruch, J.; Hahn, Klaus
Development of Innovative and Sustainable Foam Solutions
Blowing agents and foaming processes 2011 : [13th international conference] ; Düsseldorf, Germany, 10 - 11 May 2011
Shawbury : Smithers RAPRA, 2011

Ruckdäschel, Holger; Hingmann, R.; Ruch, J.; Hahn, Klaus
Development of polymer foams : Trends & sustainability
69th annual technical conference of the Society of Plastics Engineers 2011, (ANTEC 2011) : Boston, Massachusetts, USA, 1 - 5 May 2011
Red Hook, NY : Curran, 2011

2010

Ruckdäschel, Holger; Sandler, Jan K. W.; Wassner, Erik; Hahn, Klaus
The Innovation Potential of Polymer Foams
Blowing agents and foaming processes : [12th international conference] ; Cologne, Germany, 19 - 20 May 2010
Shawbury : Smithers RAPRA, 2010

2009

Gutmann, Peter; Greiner, C.; Ruckdäschel, Holger; Bangarusampath, D. S.; Altstädt, Volker
Polystyrol-Acrylnitril Nanokomposite Schäume
Verbundwerkstoffe : 17. Symposium Verbundwerkstoffe und Werkstoffverbunde
Weinheim : Wily-VCH, 2009. - S. 174-180
doi:10.1002/9783527627110.ch24 ...

Ruckdäschel, Holger
Trends in Polymer Foam Research
Blowing agents and foaming processes 2009 : 11th international conference ; Hamburg, Germany, 19 - 20 May 2009
Shawbury : Smithers RAPRA, 2009

2008

Bangarusampath, D. S.; Altstädt, Volker; Ruckdäschel, Holger; Sandler, Jan K. W.; Shaffer, Milo S. P.
Dispergierung von carbon nanotubes in poly(ether ether keton) und deren Effekte auf die rheolog ...
In: Zeitschrift Kunststofftechnik = Journal of Plastics Technology Bd. 4 (2008) Heft 6

2007

Ruckdäschel, Holger; Altstädt, Volker; Müller, Volker H. E.
Tailoring of Cellular Polymers by Blending
2007
PPS 23 : The Polymer Processing Society 23th Annual Meeting, Salvador, Brazil