Prof. Dr.-Ing. Holger Ruckdäschel

2024

Töpfer, Christian; Dippold, Marcel; Ruckdäschel, Holger
Influence of dielectric properties of polybutylene terephthalate and respective foam beads on p ...
in Journal of Applied Polymer Science volume 141 (2024) issue 8
doi:10.15495/EPub_UBT_00007509 ...

2023

Albuquerque, Rodrigo Q.; Rothenhäusler, Florian; Ruckdäschel, Holger
Designing formulations of bio-based, multicomponent epoxy resin systems via machine learning
in MRS Bulletin (2023)
doi:10.15495/EPub_UBT_00007411 ...

Rothenhäusler, Florian; Ruckdäschel, Holger
Amino Acids as Bio-Based Curing Agents for Epoxy Resin : Correlation of Network Structure and M ...
in Polymers volume 15 (2023) issue 2
http://nbn-resolving.org/urn:nbn:de:bvb:703-epub-7 ...

Soleimanpour, Amirali; Khonakdar, Hanieh; Mousavi, Seyed Rasoul; Banaei, Nastaran; Hemmati, Farkhondeh; Arjmand, Mohammad; Ruckdäschel, Holger; Khonakdar, Hossein Ali
Continuous extrusion foaming process of biodegradable nanocomposites based on poly(lactic acid) ...
in Journal of Applied Polymer Science volume 140 (2023) issue 19
doi:10.15495/EPub_UBT_00007276 ...

Nagengast, Niko; Scharl, Tizian; Frisch, Michael; Neuber, Christian; Ruckdäschel, Holger; Schmidt, Hans-Werner; Fuss, Franz Konstantin
Design for Sustainable Additive Manufacturing (DfsAM) : Preperation and Validation of a Transve ...
2023 14th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT)
Piscataway, NJ : IEEE, 2023. - page 204-212
doi:10.1109/ICMIMT59138.2023.10199510 ...

Sommer, Caroline; Nguyen, Johnny; Menzel, Teresa; Ruckdäschel, Holger; Koch, Martin
Determining weathering-induced heterogeneous oxidation profiles of polyethylene, polypropylene ...
in Chemosphere volume 343 (2023)
doi:10.1016/j.chemosphere.2023.140105 ...

Du, Ngoc Uy Lan; Bethke, Christian; Gong, Shuaiping; Altstädt, Volker; Ruckdäschel, Holger
Foaming epoxy-amine-carbamate : The effect of different neat amines on rheological and cellular ...
in Journal of Cellular Plastics volume 59 (2023) issue 3. - page 231-247
doi:10.15495/EPub_UBT_00007651 ...

Rothenhäusler, Florian; Kettenbach, Marcel; Ruckdäschel, Holger
Influence of the Stoichiometric Ratio on the Curing Kinetics and Mechanical Properties of Epoxy ...
in Macromolecular Materials and Engineering volume 308 (2023) issue 11. - page 2300122
doi:10.15495/EPub_UBT_00007604 ...

Rothenhäusler, Florian; Ruckdäschel, Holger
Influence of the stoichiometric ratio on the in-situ formation of crystals and the mechanical p ...
in Polymer Engineering & Science volume 63 (2023) issue 12. - page 4007-4018
doi:10.15495/EPub_UBT_00007355 ...

Weingart, Nick; Raps, Daniel; Lamka, Marc; Demleitner, Martin; Altstädt, Volker; Ruckdäschel, Holger
Influence of thermo-oxidative aging on the mechanical properties of the bead foams made of poly ...
in Journal of Polymer Science volume 61 (2023) issue 21. - page 2742-2757
doi:10.15495/EPub_UBT_00007295 ...

Rothenhäusler, Florian; Ruckdäschel, Holger
Interplay of curing and thermal degradation in epoxy resins cured with amino acids : Influence ...
in Journal of Applied Polymer Science volume 140 (2023) issue 45
doi:10.15495/EPub_UBT_00007296 ...

Röhrl, Maximilian; Ködel, Justus F.; Timmins, Renee; Callsen, Christoph; Aksit, Merve; Fink, Michael; Seibt, Sebastian; Weidinger, Andy; Battagliarin, Glauco; Ruckdäschel, Holger; Schobert, Rainer; Breu, Josef; Biersack, Bernhard
New Functional Polymer Materials via Click Chemistry-Based Modification of Cellulose Acetate
in ACS Omega volume 8 (2023) issue 11. - page 9889-9895
doi:10.1021/acsomega.2c06811 ...

Tayouri, Mohammad Iman; Estaji, Sara; Mousavi, Seyed Rasoul; Yazdanbakhsh, Amirhosein; Nouranian, Sasan; Ruckdäschel, Holger; Khonakdar, Hossein Ali
Polystyrene/Polyolefin Elastomer Blends Loaded with Halloysite Nanotubes : Morphological, Mecha ...
in Macromolecular Materials and Engineering volume 308 (2023) issue 9
doi:10.15495/EPub_UBT_00007606 ...

Bard, Simon; Tran, Thomas; Schönl, Florian; Rosenfeldt, Sabine; Demleitner, Martin; Ruckdäschel, Holger; Retsch, Markus; Altstädt, Volker
Relationship between the tensile modulus and the thermal conductivity perpendicular and in fibe ...
in Carbon Letters (2023)
doi:10.1007/s42823-023-00568-2 ...

Brütting, Christian; Standau, Tobias; Meuchelböck, Johannes; Schreier, Peter; Ruckdäschel, Holger
A review on semi-crystalline polymer bead foams from stirring autoclave : Processing and proper ...
in e-Polymers volume 23 (2023) issue 1
doi:10.15495/EPub_UBT_00007601 ...

Max, Florian; Hübner, Fabian; Frisch, Michael; Ruckdäschel, Holger
A scientific view on composite inlays in running shoes : The influence of epoxy crosslink densi ...
in Results in Materials volume 18 (2023)
doi:10.1016/j.rinma.2023.100404 ...

Albuquerque, Rodrigo Q.; Meuchelböck, Johannes; Ruckdäschel, Holger
A unified approach for evaluating mechanical compression tests for polymer bead foams
in Journal of Polymer Science (2023) . - page 1-10
doi:10.15495/EPub_UBT_00007510 ...

2022

Utz, Julia; Zubizarreta, Jokin; Geis, Nico; Immonen, Kirsi; Kangas, Heli; Ruckdäschel, Holger
3D Printed Cellulose-Based Filaments : Processing and Mechanical Properties
in Materials volume 15 (2022) issue 19
doi:10.15495/EPub_UBT_00006955 ...

Menzel, Teresa; Meides, Nora; Mauel, Anika; Mansfeld, Ulrich; Kretschmer, Winfried; Kuhn, Meike; Herzig, Eva M.; Altstädt, Volker; Strohriegl, Peter; Senker, Jürgen; Ruckdäschel, Holger
Degradation of low-density polyethylene to nanoplastic particles by accelerated weathering
in Science of the Total Environment volume 826 (2022)
doi:10.1016/j.scitotenv.2022.154035 ...

Heinz, Michael; Callsen, Christoph; Stöcklein, Waldemar; Altstädt, Volker; Ruckdäschel, Holger
Halogen-free flame-retardant cable compounds : Influence of magnesium-di-hydroxide filler and c ...
in Polymer Engineering & Science volume 62 (2022) issue 2. - page 461-471
doi:10.15495/EPub_UBT_00006112 ...

Demleitner, Martin; Schönl, Florian; Angermann, Jörg; Fässler, Pascal; Lamparth, Iris; Rist, Kai; Schnur, Thomas; Catel, Yohann; Rosenfeldt, Sabine; Retsch, Markus; Ruckdäschel, Holger; Altstädt, Volker
Influence of Block Copolymer Concentration and Resin Crosslink Density on the Properties of UV- ...
in Macromolecular Materials and Engineering volume 307 (2022) issue 10
doi:10.1002/mame.202200320 ...

Bubmann, Tobias; Shi, Simon; Brückner, Alexander; Menzel, Teresa; Ruckdäschel, Holger; Schlarb, Alois K.; Altstädt, Volker
Influence of Sample Wetting Method on ESC-Behavior of PMMA under Dynamic Fatigue Crack Propagat ...
in Materials volume 15 (2022) issue 12
doi:10.3390/ma15124114 ...

Meides, Nora; Mauel, Anika; Menzel, Teresa; Altstädt, Volker; Ruckdäschel, Holger; Senker, Jürgen; Strohriegl, Peter
Quantifying the fragmentation of polypropylene upon exposure to accelerated weathering
in Microplastics and Nanoplastics volume 2 (2022)
doi:10.1186/s43591-022-00042-2 ...

Standau, Tobias; Nofar, Mohammadreza; Dörr, Dominik; Ruckdäschel, Holger; Altstädt, Volker
A Review on Multifunctional Epoxy-Based Joncryl® ADR Chain Extended Thermoplastics
in Polymer Reviews volume 62 (2022) issue 2. - page 296-350
doi:10.1080/15583724.2021.1918710 ...

Sommer, Caroline; Nguyen, Johnny; Menzel, Teresa; Prume, Julia A.; Ruckdäschel, Holger; Koch, Martin
Weathering-induced oxidation : An investigation of artificially aged polystyrene samples using ...
in Polymer Testing volume 112 (2022)
doi:10.1016/j.polymertesting.2022.107623 ...

Kuhnigk, Justus; Krebs, Niko; Standau, Tobias; Dippold, Marcel; Ruckdäschel, Holger
Evaluation of the Fusion Quality of Bead Foams Made from Polybutylene Terephthalate (E-PBT) Dep ...
in Macromolecular Materials and Engineering volume 307 (2022) issue 11
doi:10.15495/EPub_UBT_00007127 ...

Nofar, Mohammadreza; Utz, Julia; Geis, Nico; Altstädt, Volker; Ruckdäschel, Holger
Foam 3D Printing of Thermoplastics : A Symbiosis of Additive Manufacturing and Foaming Technolo ...
in Advanced Science volume 9 (2022) issue 11
doi:10.15495/EPub_UBT_00006921 ...

Brütting, Christian; Dreier, Julia; Bonten, Christian; Altstädt, Volker; Ruckdäschel, Holger
Glass transition of PLA-CO₂ mixtures after solid-state saturation
in Journal of Cellular Plastics volume 58 (2022) issue 6. - page 917-931
doi:10.15495/EPub_UBT_00007060 ...

Rothenhäusler, Florian; Ruckdäschel, Holger
l-Arginine as a Bio-Based Curing Agent for Epoxy Resins : Glass Transition Temperature, Rheolog ...
in Polymers volume 14 (2022) issue 20
doi:10.15495/EPub_UBT_00006932 ...

Rothenhäusler, Florian; Ruckdäschel, Holger
l-Arginine as Bio-Based Curing Agent for Epoxy Resins : Temperature-Dependence of Mechanical Pr ...
in Polymers volume 14 (2022) issue 21
doi:10.15495/EPub_UBT_00006963 ...

Albuquerque, Rodrigo Q.; Brütting, Christian; Standau, Tobias; Ruckdäschel, Holger
A machine learning investigation of low-density polylactide batch foams
in e-Polymers volume 22 (2022) issue 1. - page 318-331
doi:10.15495/EPub_UBT_00006939 ...

Meier, Sven; Albuquerque, Rodrigo Q.; Demleitner, Martin; Ruckdäschel, Holger
Modeling glass transition temperatures of epoxy systems : a machine learning study
in Journal of Materials Science volume 57 (2022) issue 29. - page 13991-14002
doi:10.15495/EPub_UBT_00007021 ...

2021

Brütting, Christian; Dreier, J.; Bonten, C.; Altstädt, Volker; Ruckdäschel, Holger
Amorphous Polylactide Bead Foam : Effect of Talc and Chain Extension on Foaming Behavior and Co ...
in Journal of Renewable Materials volume 9 (2021) issue 11. - page 1859-1868
doi:10.32604/jrm.2021.016244 ...

Koedel, Justus; Seibt, Sebastian; Callsen, Christoph; Puchtler, Florian; Weise, Markus; Weidinger, Andy; Altstädt, Volker; Ruckdäschel, Holger; Schobert, Rainer; Biersack, Bernhard
DNA as a Natural Flame Retardant for Cellulose Acetate Polymer Mixtures
in ChemistrySelect volume 6 (2021) issue 15. - page 3605-3609
doi:10.1002/slct.202004493 ...

Mattar, Nour; Langlois, Valérie; Renard, Estelle; Rademacker, Tim; Hübner, Fabian; Demleitner, Martin; Altstädt, Volker; Ruckdäschel, Holger; Rios de Anda, Agustin
Fully Bio-Based Epoxy-Amine Thermosets Reinforced with Recycled Carbon Fibers as a Low Carbon-F ...
in ACS Applied Polymer Materials volume 3 (2021) issue 1. - page 426-435
doi:10.1021/acsapm.0c01187 ...

Menzel, Teresa; Weigert, Sebastian; Gagsteiger, Andreas; Eich, Yannik; Sittl, Sebastian; Papastavrou, Georg; Ruckdäschel, Holger; Altstädt, Volker; Höcker, Birte
Impact of Enzymatic Degradation on the Material Properties of Poly(Ethylene Terephthalate)
in Polymers volume 13 (2021) issue 22
doi:10.3390/polym13223885 ...

Kuhnigk, Justus; Raps, Daniel; Standau, Tobias; Luik, Marius; Altstädt, Volker; Ruckdäschel, Holger
Insights into the Bead Fusion Mechanism of Expanded Polybutylene Terephthalate (E-PBT)
in Polymers volume 13 (2021) issue 4
doi:10.3390/polym13040582 ...

Dreier, Julia; Brütting, Christian; Ruckdäschel, Holger; Altstädt, Volker; Bonten, Christian
Investigation of the Thermal and Hydrolytic Degradation of Polylactide during Autoclave Foaming
in Polymers volume 13 (2021) issue 16
doi:10.3390/polym13162624 ...

Kaysser, Simon T.; Bethke, Christian; Romero, Isabel Fernandez; Wei, Angeline Wo Weng; Keun, Christian A.; Ruckdäschel, Holger; Altstädt, Volker
Investigations on Epoxy-Carbamate Foams Modified with Different Flame Retardants for High-Perfo ...
in Polymers volume 13 (2021) issue 22
doi:10.15495/EPub_UBT_00006577 ...

Hübner, Fabian; Brückner, Alexander; Dickhut, Tobias; Altstädt, Volker; Rios de Anda, Agustín; Ruckdäschel, Holger
Low temperature fatigue crack propagation in toughened epoxy resins aimed for filament winding ...
in Polymer Testing volume 102 (2021)
doi:10.1016/j.polymertesting.2021.107323 ...

Du Ngoc, Uy Lan; Bethke, Christian; Altstädt, Volker; Ruckdäschel, Holger
New Insights on Expandability of Pre-Cured Epoxy Using a Solid-State CO₂-Foaming Technique
in Polymers volume 13 (2021) issue 15
doi:10.3390/polym13152441 ...

Bethke, Christian; Kaysser, Simon T.; Du Ngoc, Uy Lan; Goller, Sebastian M.; van der Zwan, Kasper P.; Senker, Jürgen; Ruckdäschel, Holger; Altstädt, Volker
Synthesis and Characterization of Dual-Functional Carbamates as Blowing and Curing Agents for E ...
in Industrial & Engineering Chemistry Research volume 60 (2021) issue 19. - page 7065-7080
doi:10.1021/acs.iecr.0c05262 ...

Bethke, Christian; Goller, Sebastian M.; Du Ngoc, Uy Lan; Kaysser, Simon Tino; Altstädt, Volker; Ruckdäschel, Holger
Tailoring Epoxy Resin Foams by Pre-Curing with Neat Amine Hardeners and Its Derived Carbamates
in Polymers volume 13 (2021) issue 8
doi:10.3390/polym13081348 ...

2013

Ruckdäschel, Holger; Sandler, Jan K. W.; Altstädt, Volker
On the Friction and Wear of Carbon Nanofibre-Reinforced PEEK-Based Polymer Nanocomposites
Tribology of polymeric nanocomposites : friction and wear of bulk materials and coatings. 2nd Edition
Amsterdam : Elsevier, Butterworth-Heinemann, 2013 (Tribology and Interface Engineering Series; 55)

2011

Ruckdäschel, Holger; Ruch, J.; Hahn, Klaus
Development of Innovative and Sustainable Foam Solutions
Blowing agents and foaming processes 2011 : [13th international conference] ; Düsseldorf, Germany, 10 - 11 May 2011
Shawbury : Smithers RAPRA, 2011

Ruckdäschel, Holger; Hingmann, R.; Ruch, J.; Hahn, Klaus
Development of polymer foams : Trends & sustainability
69th annual technical conference of the Society of Plastics Engineers 2011, (ANTEC 2011) : Boston, Massachusetts, USA, 1 - 5 May 2011
Red Hook, NY : Curran, 2011

2010

Ruckdäschel, Holger; Gutmann, Peter; Altstädt, Volker; Schmalz, Holger; Müller, Axel H. E.
Foaming of Microstructured and Nanostructured Polymer Blends
Müller, Axel H. E. ; Schmidt, Hans-Werner (Hrsg.): Complex Macromolecular Systems I
Berlin : Springer, 2010. - page 199-252 . - (Advances in Polymer Science; 227)
doi:10.1007/12_2009_32 ...

Ruckdäschel, Holger; Sandler, Jan K. W.; Wassner, Erik; Hahn, Klaus
The Innovation Potential of Polymer Foams
Blowing agents and foaming processes : [12th international conference] ; Cologne, Germany, 19 - 20 May 2010
Shawbury : Smithers RAPRA, 2010

2009

Spörrer, Andreas N. J.; Bangarusampath, D. S.; Richter, F.; Ruckdäschel, Holger; Altstädt, Volker
Structural foam moulding of styrene-acrylonitrile/polycarbonate blends : Morphological aspects ...
2009
PPS-25 : 25th annual meeting of the Polymer Processing Society, Goa, Indien

Lovera, Deliani; Ruckdäschel, Holger; Altstädt, Volker; Schmidt, Hans-Werner
Charge storage of ternary polymer blends based on poly(phenylene ether)
in Polymer International volume 58 (2009) issue 11. - page 1260-1266
doi:10.1002/pi.2653 ...

Gutmann, Peter; Bangarusampath, D. S.; Altstädt, Volker; Ruckdäschel, Holger; Schmalz, Holger; Müller, Axel H. E.
Influence of the microstructure on the foaming behavior of an immiscible blend
67th Annual Technical Conference of the Society of Plastics Engineers 2009
Brookfield, Conn. : The Society, 2009

Gutmann, Peter; Greiner, C.; Ruckdäschel, Holger; Bangarusampath, D. S.; Altstädt, Volker
Polystyrol-Acrylnitril Nanokomposite Schäume
Verbundwerkstoffe : 17. Symposium Verbundwerkstoffe und Werkstoffverbunde
Weinheim : Wily-VCH, 2009. - page 174-180
doi:10.1002/9783527627110.ch24 ...

Bangarusampath, D. S.; Ruckdäschel, Holger; Altstädt, Volker; Sandler, Jan K. W.; Garray, Didier; Shaffer, Milo S. P.
Rheological and electrical percolation in melt-processed poly(ether ether ketone)/multi-wall ca ...
in Chemical Physics Letters volume 482 (2009) issue 1-3. - page 105-109
doi:10.1016/j.cplett.2009.09.064 ...

Bangarusampath, D. S.; Ruckdäschel, Holger; Altstädt, Volker; Sandler, Jan K. W.; Garray, Didier; Shaffer, Milo S. P.
Rheology and properties of melt-processed poly(ether ether ketone)/multi-wall carbon nanotube c ...
in Polymer volume 50 (2009) issue 24. - page 5803-5811
doi:10.1016/j.polymer.2009.09.061 ...

Ruckdäschel, Holger
Trends in Polymer Foam Research
Blowing agents and foaming processes 2009 : 11th international conference ; Hamburg, Germany, 19 - 20 May 2009
Shawbury : Smithers RAPRA, 2009

2008

Gutmann, Peter; Ruckdäschel, Holger; Bangarusampath, D. S.; Altstädt, Volker; Schmalz, Holger; Müller, Axel H. E.
Batch-foaming of multiphase blend systems varying the viscosity ratio
2008
24th PPS International Meeting, Salerno, Italia

Ruckdäschel, Holger; Gutmann, Peter; Greiner, C.; Müller, Axel H. E.; Altstädt, Volker
Novel cellular materials by foaming nanostructured blends and nano-reinforced polymers
2008
24th PPS International Meeting, Salerno, Italia

Göldel, Andreas; Ruckdäschel, Holger; Müller, Axel H. E.; Pötschke, Petra; Altstädt, Volker
Controlling the phase morphology of immiscible poly(2,6-dimethyl-1,4-phenylene ether)/poly(styr ...
in e-Polymers volume 8 (2008) issue 1
doi:10.1515/epoly.2008.8.1.1741 ...

Ruckdäschel, Holger; Rausch, Julius; Sandler, Jan K. W.; Altstädt, Volker; Schmalz, Holger; Müller, Axel H. E.
Correlation of the melt rheological properties with the foaming behavior of immiscible blends o ...
in Polymer Engineering & Science volume 48 (2008) issue 11. - page 2111-2125
doi:10.1002/pen.21100 ...

Ruckdäschel, Holger; Bangarusampath, D. S.; Greiner, C.; Gutmann, Peter; Gebhardt, Matthias; Türke, C.; Spörrer, Andreas N. J.; Fischer, F.; Altstädt, Volker; Müller, Axel H. E.
Development of novel cellular materials via foaming of nanoreinforced polymers and multiphase b ...
Blowing agents and foaming processes 2008
Shawbury : Smithers Rapra, 2008

Bangarusampath, D. S.; Altstädt, Volker; Ruckdäschel, Holger; Sandler, Jan K. W.; Shaffer, Milo S. P.
Dispergierung von carbon nanotubes in poly(ether ether keton) und deren Effekte auf die rheolog ...
in Kunststoffe volume 4 (2008) issue 6

Bangarusampath, D. S.; Altstädt, Volker; Ruckdäschel, Holger; Sandler, Jan K. W.; Shaffer, Milo S. P.
Dispersion of carbon nanotubes in poly(ether ether ketone) and its effects on rheological and e ...
in Zeitschrift Kunststofftechnik = Journal of Plastics Technology volume 4 (2008) issue 6

Ruckdäschel, Holger; Fischer, Frank; Altstädt, Volker; Müller, Axel H. E.
Fatigue Crack Growth Behavior of Multiphase Blends
in Journal of Solid Mechanics and Materials Engineering volume 2 (2008) issue 4. - page 417-427
doi:10.1299/jmmp.2.417 ...

Ruckdäschel, Holger
Micro- and nanostructured polymer blends : Processing, properties and foaming behaviour
Bayreuth, Universität, Lehrstuhl für Polymere Werkstoffe, 2008(dissertation, 2008, )

Ruckdäschel, Holger; Sandler, Jan K. W.; Altstädt, Volker
On the Friction and Wear of Carbon Nanofiber-Reinforced PEEK-Based Polymer Composites
Tribology of Polymeric Nanocomposites : friction and wear of bulk materials and coatings
Amsterdam : Elsevier, 2008. - page 149-208
doi:10.1016/S1572-3364(08)55008-7 ...

2007

Ruckdäschel, Holger; Altstädt, Volker; Müller, Volker H. E.
Tailoring of Cellular Polymers by Blending
2007
PPS 23 : The Polymer Processing Society 23th Annual Meeting, Salvador, Brazil

Galetz, Mathias; Blaß, T.; Ruckdäschel, Holger; Sandler, Jan K. W.; Altstädt, Volker; Glatzel, Uwe
Carbon nanofibre-reinforced ultrahigh molecular weight polyethylene for tribological applicatio ...
in Journal of Applied Polymer Science volume 104 (2007) issue 6. - page 4173-4181
doi:10.1002/app.26058 ...

Ruckdäschel, Holger; Gutmann, Peter; Altstädt, Volker; Schmalz, Holger; Müller, Axel H. E.
Development of Micro- and Nanocellular Polymers
in MRS Online Proceedings Library volume 1056 (2007)
doi:10.1557/PROC-1056-HH11-75 ...

Ruckdäschel, Holger; Altstädt, Volker; Müller, Axel H. E.
Foaming of polymer blends : Chance and challenge
in Cellular Polymers volume 26 (2007) issue 6. - page 367-380
doi:10.1177/026248930702600602 ...

Altstädt, Volker; Sandler, Jan K. W.; Ruckdäschel, Holger
Influence of Nanoscale Morphology on the Micro- and Macromechanical Behaviour of Polymers and P ...
in Solid State Phenomena volume 121-123 (2007) . - page 1391-1394
doi:10.4028/www.scientific.net/SSP.121-123.1391 ...

Lovera, Deliani; Ruckdäschel, Holger; Göldel, Andreas; Behrendt, Nico; Frese, Thomas; Sandler, Jan K. W.; Altstädt, Volker; Giesa, Reiner; Schmidt, Hans-Werner
Tailored Polymer Electrets Based on Poly(2,6 Dimethyl-1,4-Phenylene Ether) and its Blends with ...
in European Polymer Journal volume 43 (2007) issue 4. - page 1195-1201
doi:10.1016/j.eurpolymj.2006.12.032 ...

Ruckdäschel, Holger; Sandler, Jan K. W.; Altstädt, Volker; Schmalz, Holger; Abetz, Volker; Müller, Axel H. E.
Toughening of immiscible PPE/SAN blends by triblock terpolymers
in Polymer volume 48 (2007) issue 9. - page 2700-2719
doi:10.1016/j.polymer.2007.03.005 ...

2006

Ruckdäschel, Holger; Sandler, Jan K. W.; Altstädt, Volker; Rettig, Cornelia; Schmalz, Holger; Abetz, Volker; Müller, Axel H. E.
Compatibilisation of PPE/SAN blends by triblock terpolymers : Correlation between block terpoly ...
in Polymer volume 47 (2006) issue 8. - page 2772-2790
doi:10.1016/j.polymer.2006.02.064 ...

Ruckdäschel, Holger; Rausch, Julius; Sandler, Jan K. W.; Altstädt, Volker; Schmalz, Holger; Müller, Axel H. E.
Foaming of Miscible and Immiscible Polymer Blends
in MRS Online Proceedings Library volume 977 (2006)
doi:10.1557/PROC-977-0977-FF14-04 ...

2005

Ruckdäschel, Holger; Schmalz, Holger; Altstädt, Volker; Müller, Axel H. E.
Compatibilisation of immiscible blends by triblock terpolymers : Influence of molecular archite ...
PPS-21 : Polymer Processing Society, twenty first annual meeting
Halle-Wittenberg : Martin Luther Univ., 2005

2004

Ruckdäschel, Holger; Sandler, Jan K. W.; Altstädt, Volker
Maßgeschneiderte Lösungen
in Plastverarbeiter volume 55 (2004) issue 10. - page 106-108
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&so ...