Druckansicht der Internetadresse:

Print page

Prof. Dr.-Ing. Frank Döpper

FrankDöpper_180x180 Prof. Dr.-Ing. Frank Döpper
FrankDöpper_180x180


Environmental Production Engineering


Professional experience

since 2017Professor at the University of Bayreuth, Chair of Environmental Production Engineering
2004 – 2017Site, division and production management with responsibility for results and budgets in international mechanical and plant engineering and commercial vehicle manufacturing
2000 – 2004Technology and investment management in international mechanical and plant engineering
1995 – 2000Research associate at the Fraunhofer Institute for Production Technology IPT, Aachen
FrankDöpper_180x180


Environmental Production Engineering


Selected publications

2023

Groneberg, Hajo; Bock, Timo; Döpper, Frank
Resilience in value creation systems through additive manufacturing : a decision model
in Procedia Computer Science volume 217 (2023) . - page 296-305
doi:10.1016/j.procs.2022.12.225 ...

2022

Bay, Christian; Mahr, Alexander; Hofmann, Andreas; Wienert, Christian; Döpper, Frank
Analysis of the Influence of Build Plate Pre-Treatment and Process Parameters on the Bonding of ...
Advances in Materials and Technologies
Baech, SZ : Trans Tech Publications Ltd, 2022. - page 49-58 . - (Key Engineering Materials; 934)
doi:10.4028/p-yf8y2m ...

Groneberg, Hajo; Horstkotte, Rainer; Pruemmer, Marcel; Bergs, Thomas; Döpper, Frank
Concept for the reduction of non-value-adding operations in Laser Powder Bed Fusion (L-PBF)
in Procedia CIRP volume 107 (2022) . - page 344-349
doi:10.1016/j.procir.2022.04.056 ...

Koller, Jan; Häfner, Rebecca; Döpper, Frank
Decentralized Spare Parts Production for the Aftermarket using Additive Manufacturing : A Liter ...
in Procedia CIRP volume 107 (2022) . - page 894-901
doi:10.1016/j.procir.2022.05.081 ...

Hofmann, Andreas; Huber, Andreas; Mahr, Alexander; Bay, Christian; Döpper, Frank
Influence of the effective thermal conductivity of the powder bed on the properties of overhang ...
in Procedia CIRP volume 111 (2022) . - page 138-143
doi:10.1016/j.procir.2022.08.137 ...

Bay, Christian; Grotz, Tim; Kleylein-Feuerstein, Joachim; Schorzmann, Johann
Qualitätssicherung in der additiven Materialextrusion : Anwenderleitfaden für die Serienfertigu ...
publ: Döpper, Frank
Stuttgart : Fraunhofer Verlag, 2022. - 105 page

2021

Vysoudil, Filip; Hansen, Sönke; Mennenga, Mark; Fukuda, Maho; Ohnemüller, Gregor; Rüther, Tom; Goers, Dietrich; Koller, Jan; Nikolowski, Kristian; Rosemann, Bernd; Wolter, Mareike; Danzer, Michael A.; Döpper, Frank; Herrmann, Christoph; Vietor, Thomas
Procedure Model to support the Recycling-oriented Design of Lithium-Ion Batteries for Electric ...
2021
Going Green – Ecodesig 2021, Online Conference

Koop, Carina; Große Erdmann, Julian; Koller, Jan; Döpper, Frank
Circular Business Models for Remanufacturing in the Electric Bicycle Industry
in Frontiers in Sustainability volume 2 (2021)
doi:10.3389/frsus.2021.785036 ...

Schmidt, Julian; Thorenz, Benjamin; Schreiner, Florian; Döpper, Frank
Comparison of areal and profile surface measurement methods for evaluating surface properties o ...
2021
doi:10.1016/j.procir.2021.09.078 ...
18th CIRP Conference on Modeling of Machining Operations (CMMO), Ljubljana, Slovenia

Schock, Christoph; Dumler, Jonas; Döpper, Frank
Data Acquisition and Preparation - Enabling Data Analytics Projects within Production
in Procedia CIRP volume 104 (2021) . - page 636-640
doi:10.15495/EPub_UBT_00005915 ...

Schreiner, Florian; Thorenz, Benjamin; Schmidt, Julian; Friedrich, Markus; Döpper, Frank
Development of a Measuring and Control Unit for an Intelligent Adjustment of Process Parameters ...
in MM Science Journal (2021) issue 5. - page 5203-5210
doi:10.17973/MMSJ.2021_11_2021166 ...
16th International Conference on High Speed Machining (HSM 2021), Darmstadt

Groneberg, Hajo; Koller, Jan; Mahr, Alexander; Döpper, Frank
Development of a systematic approach to identify non-value-adding operations in the LBM process ...
in Procedia CIRP volume 104 (2021) . - page 1613-1618
doi:10.1016/j.procir.2021.11.272 ...

Pezold, Daniel; Rosnitschek, Tobias; Kleuderlein, Andre; Döpper, Frank; Alber-Laukant, Bettina
Evaluation of Technologies for the Fabrication of Continuous Fiber Reinforced Thermoplastic Par ...
Technologies for economic and functional lightweight design
Berlin : Springer, 2021. - page 125-141 . - (Zukunftstechnologien für den multifunktionalen Leichtbau; 11)
doi:10.1007/978-3-662-62924-6_11 ...

Bay, Christian; Mahr, Alexander; Groneberg, Hajo; Döpper, Frank
Lean Production to Increase Reproducibility and Work Safety in the Laser Beam Melting Process C ...
in International Journal of Industrial and Manufacturing Engineering volume 15 (2021) issue 6. - page 278-283
https://publications.waset.org/10012097/lean-produ ...

Haas, Lukas; Döpper, Frank; Schmidt, Konstantin; Franke, Jörg; Reinhardt, Andreas
Studies and Analyses of Moisture Conditioned SMT-Components
2021 23rd European Microelectronics and Packaging Conference & Exhibition (EMPC®)
Piscataway, NJ : IEEE, 2021
doi:10.23919/EMPC53418.2021.9584942 ...

Mahr, Alexander; Bay, Christian; Huber, Tobias; Döpper, Frank
Systematische Bewertung der materialspezifischen humantoxischen Gefährdungen bei additiven Fert ...
Proceedings of the 17th Rapid.Tech 3D Conference Erfurt, Germany, 22–23 June 2021
München : Hanser, 2021

Hofmann, Andreas; Mahr, Alexander; Bay, Christian; Döpper, Frank
Verzug bei pulverbettbasiertem Schmelzen von TiAl6V4 : Einflüsse der Bauteilgeometrie und Wärme ...
in wt Werkstattstechnik online volume 111 (2021) issue 6. - page 372-377
doi:10.37544/1436-4980-2021-06-16 ...

2020

Bay, Christian; Döpper, Frank
Innovativ aus der Krise : Interdisziplinäres Zentrum für 3D-Druck
in K-Zeitung : Die Zeitung der Kunststoff- und Kautschukundustrie (2020) issue 10

Jugenheimer, Andreas; Rosemann, Bernd; Döpper, Frank; Hellmich, Caroline
Refabrikation : die ultimative Kreislaufwirtschaft
in HZwei : Das Magazin für Wasserstoff und Brennstoffzellen volume 20 (2020) issue 01. - page 40-42

Thorenz, Benjamin; Oßwald, Friedrich; Schötz, Sebastian; Westermann, Hans-Henrik; Döpper, Frank
Applying and Producing Indexable End Mills : A Comparative Market Study in Context of Resource ...
in Procedia Manufacturing volume 43 (2020) . - page 167-174
doi:10.15495/EPub_UBT_00004842 ...
17th Global Conference on Sustainable Manufacturing, Shanghai, China

Bay, Christian; Döpper, Frank
Auf dem Weg zur industriellen Reife : Von der Idee über die Kleinserie bis zur AM-Serienfertigu ...
in Maschinenbau : das Schweizer Industrie-Magazin volume 49 (2020) issue 7

Molenda, Paul; Mezger, Tizian; Oechsle, Oliver; Koller, Jan; Döpper, Frank
Backlog-Sequencing : A Comparison between Workload Control and ConWIP using a simulation approa ...
in Procedia CIRP volume 93 (2020) . - page 664-669
doi:10.1016/j.procir.2020.04.097 ...

Koller, Jan; Velte, Christoph J.; Schötz, Sebastian; Döpper, Frank
Customizing Products through Remanufacturing : Ideation of a Concept
in Procedia Manufacturing volume 43 (2020) . - page 598-605
doi:10.1016/j.promfg.2020.02.151 ...

Koller, Jan; Kemp, Daniel; Döpper, Frank
Supporting Disassembly in Remanufacturing with Augmented Reality
2020 IEEE International Conference on Technology Management, Operations and Decisions (ICTMOD)
Marrakech, Morocco , 2020
doi:10.1109/ICTMOD49425.2020.9380599 ...

2019

Thorenz, Benjamin; Friedrich, Markus; Westermann, Hans-Henrik; Döpper, Frank
Evaluation of the influence of different inner cores on the dynamic behavior of boring bars
2019
doi:10.1016/j.procir.2019.03.287 ...
52nd CIRP Conference on Manufacturing Systems, Ljubljana, Slowenien

Groneberg, Hajo; Schuh, Christian; Steinhilper, Rolf; Döpper, Frank
Implementation of Methods for the Optimization of Processes and Production Systems : Catching t ...
Advances in Production Research : Proceedings
Cham : Springer, 2019. - page 237-246
doi:10.1007/978-3-030-03451-1_24 ...

Globisch, Steffen; Thäter, Stefan; Döpper, Frank
Optical inspection for the characterization and classification of component surfaces in the fie ...
Advances in Production Research : Proceedings
Cham : Springer, 2019. - page 44-51
doi:10.1007/978-3-030-03451-1_5 ...

2018

Schötz, Sebastian; Koller, Jan; Döpper, Frank
Decision Support Methodology to Reduce Quality-related Costs within Mass Production
2018 IEEE International Conference on Technology Management, Operations and Decisions (ICTMOD)
Piscataway, NJ : IEEE, 2018. - page 49-54
doi:10.1109/ITMC.2018.8691283 ...

FrankDöpper_180x180


Environmental Production Engineering


Prof. Dr.-Ing. Frank Döpper

University of Bayreuth
Chair of Environmental Production Engineering
Universitätsstraße 9
95447 Bayreuth

Phone: +49 (0)921 / 78516-100
E-mail: frank.doepper@uni-bayreuth.de
Homepage: Homepage of the Contributor

Webmaster: Beate Heinz-Deuerling

Facebook Twitter Youtube-Kanal Instagram LinkedIn Blog Kontakt